# $XConsortium: XF86Conf.cpp,v 1.5 95/01/16 13:16:10 kaleb Exp $:$
# $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.11 1995/01/28 15:46:18 dawes Exp $
#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file. This man page is installed as /usr/X11R6/man/man5/XF86Config.5x 
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
    FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    DontZoom

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol	"Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line

#    Protocol	"Xqueue"

    AutoRepeat	500 5

# Let the server do the NumLock processing.  This should only be required
# when using pre-R6 clients
#    ServerNumLock

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift, 
# RightCtl key to Compose, and ScrollLock key to ModeLock:

#    LeftAlt     Meta
#    RightAlt    ModeShift
#    RightCtl    Compose
#    ScrollLock  ModeLock

EndSection


# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"

    Protocol	"PS/2"
    Device	"/dev/psm0"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate	9600
#    SampleRate	150

# Emulate3Buttons is an option for 2-button Microsoft mice

#    Emulate3Buttons

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier	"Generic Monitor"
    VendorName	"Unknown"
    ModelName	"Unknown"

# Bandwidth is in MHz unless units are specified

#    Bandwidth	25.2
#    Bandwidth	25.2, 36

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   24.58, 35.17, 31.47, 48.44

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 39.34, 52.08, 54.51, 56.25, 58.11, 59.94

#    VertRefresh	50-100        # multisync
#    VertRefresh	60, 65        # multiple fixed sync frequencies
#    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
# These two are equivalent

#    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525

#        DotClock	25.175
    Mode "640x480"
        DotClock	25.175
        HTimings	640 664 760 800
        VTimings	480 491 493 525
    EndMode
    Mode "800x600"
        DotClock    36
        HTimings 800 824 896 1024
        VTimings 600 601 603 605
    EndMode
    Mode "1024x768"
        DotClock 62
        HTimings 1024 1064 1240 1280
        VTimings 768 774 776 808
    EndMode

# These two are equivalent

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier	"Generic VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"
    Chipset	"tvga9000"
#    VideoRam	1024
    VideoRam	2048
    Clocks	36 28.3 25.175
EndSection

Section "Device"
    # SVGA server auto-detected chipset
    Identifier	"Generic SVGA"
    VendorName	"Unknown"
    BoardName	"Unknown"
    Chipset	"tvga9000"
    VideoRam	1024
    Clocks	36 60
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# The colour SVGA server

Section "Screen"
    Driver	"svga"
    Device	"Generic SVGA"
    Monitor	"Generic Monitor"
    Subsection "Display"
        Depth	    8
        Modes	    "800x600" "1024x768"
        ViewPort    0 0
        Virtual     1024 768
    EndSubsection
EndSection

# The 16-colour VGA server

Section "Screen"
    Driver	"vga16"
    Device	"Generic VGA"
    Monitor	"Generic Monitor"
    Subsection "Display"
        Modes	    "640x480" "800x600"
        ViewPort    0 0
        Virtual     800 640
    EndSubsection
EndSection

# The Mono server

Section "Screen"
    Driver	"vga2"
    Device	"Generic VGA"
    Monitor	"Generic Monitor"
    Subsection "Display"
        Modes	    "640x480"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection
