 Card: 3COM #3C410,  HPNA 2.0 (not wireless)
 Chipset: Broadcom BCM4210
 pciid: feda:a0fa
 Driver: 3C410 from ftp://ftp.3com.com/pub/nic/3c410/3c410.exe
 Other: Fedora Core 3 with 16k stack kernel from linuxant (kernel-2.6.10-1.741_FC3.stk16.i686), ndiswrapper-1.0-1.  Note this is not a wireless card (3Com ~HomeConnect® Home Network 10 Mbps Phoneline PCI), but it works! Also works on PCLinuxOS ver 0.92 kernel 2.6.12-oci6.mdk-i586-up-1GB, NDISwrapper ver 1.2 (not newer). The above driver is the same one on the CD.

 Card: 3COM #3CRSHPW796, 11mbps OfficeConnect Wireless CardBus (rev 15)
 Chipset: ADMTek ADM8211
 pciid: 10b7:6000
 Driver: 3CRSHPW796_29Sep03.exe from http://www.3com.com/products/en_US/result.jsp?selected=6&sort=effdt&sku=3CRSHPW796&order=desc
 Other:Works fine on Toshiba Satellite 1410 SP-173 runing SuSE 9.2 (kernel 2.6.8-24-default), using the guide from this page, NdisWrapper 0.10-3. Note for wireless newbies (I''m on) deactivate the eth0 before config the wlan0 with Yast and after it restart!

 Card: 3COM #3CRWE254A72, 54mbps
 Chipset: Atheros AR5212
 pciid: 168c:0013
 Driver: net5211 from http://www.netgate.com/support/Drivers/Atheros/atherosv24driver.zip
 Other:The card also works with the driver on the CD, but that was rather unstable. The Atheros driver works just fine for me on my Acer Aspire 1603LM_2.6 running Fedora Core 2.

 Card: 3COM 3CRWE254G72, 54mbps
 Chipset: Prism54
 usbid: 0506:0a11
 Driver: 3COM 3CRWE254G72_03Feb04.exe from http://www.3com.com/products/en_US/result.jsp?selected=5&sort=effdt&sku=3CRWE254G72&order=desc
 Other: GEntoo 2.6.7-r11, Ndiswrapper from CVS (18-08-2004) manual compile. Work well, no instability, 137 MB transferred in 5 minutes with router at 30m on different floor

 Card: 3COM 3CR154G72, 54mbps - Version 2.0 (3Com OfficeConnect Wireless 11g PCCard Version 2.0)
 Chipset: Prism54
 pciid: 10b7:6001
 Driver: 3COM 3CR254G72 DriverVer? = 06/25/2004, 3.0.7.2 from install CD
 Other: Debian 2.6.8-1-686, Ndiswrapper from CVS (12-10-2004) manual compile.
 Other: Ubuntu, Ndiswrapper from manual compile.

 Card: 3COM 3CRGPC10075, 54mbps - Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 43)
 Chipset: Marvell 88w8335
 pciid: 11ab:1faa (rev 43)
 Driver: 3COM 3CRGPC10075 version 2.0 (May 2006) from installation CD.
 Other: The driver available from 3COM''s website for rev03 below did NOT work!
 Other: debian linux 2.6.22-2, ndiswrapper 1.47, wireless-tools 29-pre22-1

 Card: 3COM 3CRGPC10075, 54mbps - Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03)
 Chipset: Marvell 88w8335
 pciid: 11ab:1faa 
 Driver: 3COM 3CRGPC10075 DriverVer? =3CRGPC10075_08_18_2005.exe from http://www.3com.com/products/en_US/result.jsp?selected=6&sort=effdt&sku=3CRGPC10075&order=desc
 Other: kanotix ndiswrapper-modules-2.6.14-kanotix-9 (already installed on 2005-04)

 Card: vendor string: "802.11g USB 2.0 Wireless LAN'' (also sold as "Fiberline WL-430U'' ?)
 Other: Linux 2.6.16 i686 gcc-3.4
 Other: ndiswrapper-1.16 + wpa_supplicant v0.4.9, works well, without instability
 Other: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMPwith WPA, WPA2, WPA2PSK
 Chipset: zd1211b
 usbid: 1582:6003
 Driver: http://www.zydas.com.tw/web_driver/ZD1211B/Windows/ZD1211BWinPkgS_6_3_1_0_ALL.zip  ZyDAS-Website] Marvell Technolog Group

 Card: 3COM 3CRUSB20075, 108mbps - USB
 Chipset: ATHEROS 5523
 lsusb ID: a727:6893
 Driver: net5523.inf  from install CD
 Other: Ubuntu 6.10, Ndiswrapper from manual compile.

 Card: eHome EH101 802.11b/g Wireless (rev 03)
 Chipset:  Marvell Technology Group  88w8335 Libertas
 pciid: 06:00.0
 Driver: mrv8335.inf from install CD for Windows 2000 and Windows XP
 Other: Works fine with fedora core 6

 Card: Actiontec Electronics, Inc. 802UI3 802.11b Wireless USB Adapter
 Chipset: Intersil Corporation PRISM 2.5
 usbid: 1668:0421
 Driver: http://www.actiontecsupport.com/files/Prism80211b2KXPDrivers.exe
 Other: This adapter is the HP510 buit-in wlan card (usb) and works with NdisWrapper 1.41 on slackware 11.0 using kernel 2.6.19.1 

 Card: Airnet AWD154/AWN154
 Chipset: Marvell Technology Group Ltd.: Unknown device 1faa
 PCI ID: 11ab:1faa (rev 03)
 Driver: http://www.airnetusa.com/downloads/driver/DRXP_AWD_AWN154_v11.zip
 Other: Used ndiswrapper on Kubuntu 5.10 (Breezy) CD. kernel updated to 2.6.12 added stability. Also works fine with WindowsXP drive from the CD, download not nescessary.

 Card: Advantek awn-usb-54m
 Chipset: sis163u Silicon Integrated Systems Corp
 USBID: 0457:0163
 Driver: http://www.mejorenlinea.com/drivers/advantek-awn-usb-54m.tar.gz Uploaded by myself. Its came with CD drivers.
 Other:Ndiswrapper v. 1.8, on Ubuntu Edgy.followed general ndiswrapper installation instructions.

 Card: Airnet AWD 108
 Chipset: Atheros AR5212
 pciid: 168c:0013
 Driver: http://www.dlink.com/
 Other:Ndiswrapper v. 11.1, on Fedora Core 5.  Downloaded 16 stack devel-kernel and kernel from: http://www.linuxant.com/driverloader/wlan/full/downloads-fc5-kernel-i686.ph and followed instructions to create an rpm from here: http://ndiswrapper.sourceforge.net/mediawiki/index.php/Fedora and followed general ndiswrapper installation instructions.

 Card: Aironet 350 PCI
 Chipset: Aironet MAC + PrismII
 PCI ID: 14b9:0350
 Driver: http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless
 Other: In order to use with version 1.4, you need to remove pcx500mp.sys from /etc/ndiswrapper/netx500/. For WPA support don''t forget to update your firmware. Sould work with other aironet cards.

 Card: ALLNET ALLSPOT WHF-430 USB 2.0 WiFi Dongle with Worldwide Radio Finder (LCD)
 Chipset: ZDA211u ???
 pciid: 157e:3204
 Driver: zda211u chipset driver from allnet: allspot wifi (whf-430) or from linksys:WUSBf54G same chipset!
 Other: ndiswrapper 1.5rc2 (only!), debian sarge kernel 2.6.13.2 on p4 celeron.also look at: http://zd1211.ath.cx/zd1211 for an open dource version of this driver

 Card: Alpha AFW-N411
 Chipset: Realtek RTL8180 (rev 20) Cost: 120CNY (US$14.50), mainland China, after bargaining ;) (Feb. 2005)
 PCI ID: 10ec:8180 (rev 20)
 Driver: http://www.alphaweb.com.cn/downloads/Drivers/WIRELESS/AFW-N411.rar (earlier release of the same driver, supplied on CD with the card, works too)
 Other: ndiswrapper 0.12; Slackware 10 (kernel 2.4.26).

 Card: A-Link WL54H
 Chipset: RaLink RT2500 (rev 01)
 pciid: 1814:0201 (rev 01)
 Driver: Ndiswrapper 0.9 and RT2500 thingies (.inf and .sys for WinXP) from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Gentoo 2.6.8 and working well. Easy to get running.
 Other: pciid: 1814:0302 is rt2561 chip and it wont work with these drivers (lspci & lspci -n) not even if loaded rt61.inf/.sys Check "Card: Linksys WMP54G v4.1" on this page how to compile driver.

 Laptop: Acer Aspire 5002 NWLMI
 Chipset: Broadcom Corporation BCM4318 802.11 b/g 
 Driver: BCMWL5a.inf from driver cd of Acer (32bit) and driver 64 bit from ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/winxp64bit/80211g.zip

 Laptop: Acer Aspire 1511 LMi and Acer Aspire 1501 LMi
 Chipset: Broadcom Corporation BCM4306 802.11g (rev 3)
 pciid: 14e4:4320 (rev 3)
 Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1500/drivers/80211g.zip from http://support.acer-euro.com/drivers/notebook/as_1500.html

 Laptop: Acer Aspire 5570Z
 Chipset: Atheros AR5007EG (rev 01)
 PCI ID: 168c:001c
 Driver: ftp://ftp.work.acer-euro.com/notebook/aspire_5100/driver/802ABG_Atheros_v5_1_1_9.zip
 ndiswraper version : > 1.45
 other : need to uninstall all madwifi kernel module before use ndiswrapper
 other : if you can''t get any AP signal, try to enable wifi radio through wlan switch (it''s look like nothing happened when you try to enable through wifi, because the LED is not compatible with linux(i''m using ubuntu 7.04), but if you try "iwlist wlan0 scan'' you''ll see some AP information
 other : 64-bit XP driver is available at http://www.giga-byte.com.tw/Support/Communication/Driver_Model.aspx?ClassValue=Communication&ProductID=2215&ProductName=GN-WI01GT

 Laptop: Acer Aspire 4720Z
 Chipset: Atheros AR5006EG (rev 01)
 PCI ID: 168c:001c
 Driver: ftp://ftp.work.acer-euro.com/notebook/aspire_4710/driver/Wireless_Atheros.zip
 Other : On Kubuntu 7.10 Gutsy using ndiswrapper 1.43-1ubuntu2 from install CD

 Laptop: Acer Aspire 1353 LCi
 Chipset: Chipset: Realtek RTL8180 (rev 20)
 PCI ID: 10ec:8180 (rev 20)
 Driver: http://www.alphaweb.com.cn/downloads/Drivers/WIRELESS/AFW-N411.rar
 Other: Works well,but seems to forget SSID and Wep-KEY. Just use a little pre-up script in etc/network/adpapters

 Laptop: Acer Aspire 1524 WLMi
 Chipset: Linksys, A Division of Cisco Systems AirConn INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 17fe:2220
 Driver: Ndiswrapper 1.4-rc2 and driver from planetamd64.com (and the official driver from Acer works, too).
 Other: Works correctly with 64bit system with open access, encryption works (with wpa_supplicant) at least for WPAPSK + TKIP. Other methods untested.

 Laptop: Acer Aspire 1450
 Chipset: Broadcom Corporation BCM94306 802.11g (rev 3)
 pciid: 14e4:4320 (rev 3)
 Driver: http://www.silfreed.net/download/hpzt3000cto/SP23107A.tar.gz

 Card: Acer Aspire 1623LMi 54mbps
 Chipset: Broadcom BCM4306 (rev 03)
 pciid: 14e4:4320
 Driver: WinXP provided driver by Acer
 Other: Works with WEP and WPA with either CCMP/AES or TKIP ciphers Tested on Gentoo Gnu/Linux - Ndiswrapper 0.10 official ebuild (XDR).

  Laptop: Acer Aspire 1664LMi
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 14e4:4320
 *subsys: 185f:1220
 Driver: from Acer support page
 Other: Tested with NDISWrapper 0.10 on gentoo linux with kernel 2.6.9

  Laptop: Acer Aspire 1671WLMi
 Chipset: Linksys, A Division of Cisco Systems AirConn INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 17fe:2220
 Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1670/driver/80211bg.zip from http://support.acer-euro.com/drivers/notebook/as_1670.html
 Other: NdisWrapper 1.18 (from Ubuntu repository) on Ubuntu Edgy 6.10 with kernel 2.6.17

 Notebook: Acer Aspire 3023WLMi
 Kernel 2.6.12 vanilla RPM for Fedora Core 4
 Chipset: Broadcom Corporation BCM4318 802.11/g Wireless LAN
 pciid: 14e4:4318
 Driver: ndiswrapper v1.3rc1 with bcmwl5a.inf or bcmwl5.inf (either works) ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/ (Broadcom, 12/22/2004, v3.100.46.0)
 Other: acerhk v0.5.27 compiled and loaded with /sbin/modprobe acerhk autowlan=1 poll=0 force_series=5020 verbose=3 usedritek=1.   wlan0 can be activated with ifup or the Network Configuration GUI tool.  The LED button blinks very dimly when the card is searching for APs.
 works flawlessly (without acerhk) on ArchLinux 0.7.1, kernel 2.6.16-2, ndiswrapper 1.12.

 Laptop: Acer Ferrari 3400LMi
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 Other: Much like all the other Broadcom/Acer cards, but won''t scan/work right unless you set the boot options "apm=off acpi=noirq" in /boot/grub/menu.lst so that the kernel starts up that way.  Tested with SuSE 9.1 (with SuSE 9.2 2.6.8 kernel security fix rpm as an easy way to upgrade to more recent kernel) and ndiswrapper 1.1rc2, using Acer broadcom driver.  The "apm=off" allows the proprietary driver to exit without hanging the unit, too =O)

 Laptop: Acer Travelmate 2414LMi
 Chipset: Atheros ar5211, labelled as AR5005G
 Driver: Foxconn driver http://support.acer-euro.com/drivers/notebook/tm_2410.html
 Other: Use unshield to extract the group Diskette_Files and use net5211.inf from there, not Driver_Files_NDIS5.
 Other: Running on SuSE 10.1, kernel 2.6.16.21-0.13-default, ndiswrapper 1.10-19.

 Laptop: Gericom Radeon
 Chipset: ADMtek ADM8211 802.11b Wireless LAN Adapter (rev 11)
 Driver: from ADM homapage http://www.infineon.com/cgi/ecrm.dll/ecrm/scripts/prod_ov.jsp?oid=52851&cat_oid=-12484
 Other: Tested with NDISWrapper 1.0 on Fedora Core 2 linux with kernel 2.6.5

 Card: Acer Travelmate 2301WLMi - IPN2220 a/b/g
 Chipset: INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 17fe:2220
 Driver: ftp://ftp.support.acer-euro.com/notebook/TravelMate_4000_4500/driver/a802.zip
 Other: Used Winxp driver. Works with WPA with TKIP ciphers, WEP untested, unable to logon with WPA CCMP/AES Tested on Debian Sarge Gnu/Linux, kernel 2.6.8 - Ndiswrapper 0.11 debian source.

 Card: Acer Aspire 1362LMi 54mbps
 Chipset: INPROCOMM IPN 2220 Wireless LAN Adapter
 pciid: 17fe:2220
 *subsys: 1468:0305
 Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1360/driver/80211g.zip
 Other:Driver for use with ndiswrapper is prepackaged in Ark Linux &ndash; Ark Linux users simply "apt-get install driver-ipn2220".

 Card: Acer Aspire 1363WLMi 54mbps
 Chipset: INPROCOMM IPN 2220 Wireless LAN Adapter
 pciid: 17fe:2220
 Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1360/driver/80211g.zip (specific drivers for acer aspire 1363 series)
 Other: Used WinXP driver. WEP works with ndiswrapper-1.2. WPA untested so far. Worked without any further tweaking on Fedora Cora 3 with 2.6.9-1.667, no need to  install 16K stack kernel.

 Laptop: Acer Aspire 1412WLMi 54Mbps
 Chipset: INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 17fe:2220
 *subsys: 1468:0305
 Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1360/driver/80211g.zip
 Other: WPA works with wpa_supplicant

 Card: Acer Aspire 1502LMi (rev 03) 54mbps
 Chipset: Broadcom 94306
 pciid: 14e4:4320
 *subsys: 185f:1220
 Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1500/drivers/80211g.zip
 Other: Driver for use with ndiswrapper is prepackaged in Ark Linux &ndash; Ark Linux users simply "apt-get install driver-broadcom94306".
 Other: BCM4306 Driver version 4.10.40 (11/02/2005) can be extracted from http://ftp1.us.dell.com/network/R113359.EXE.

 Card: Acer Aspire 1524WLMi 54mbps
 Chipset: INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 17fe:2220
 *subsys : 1468:0305
 Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1360/driver/80211g.zip

 Laptop: Acer Travelmate 2310
 Chipset: Atheros ar5211, labelled as AR5005G (168c:001a)
 Driver: from Acer (generic drivers do NOT work) ftp://ftp.work.acer-euro.com/notebook/travelmate_2310/driver/802bg.zip
 Other: Debian etch, Linux 2.6.20.6, ndiswrapper 1.41

 Laptop: Acer Extensa 2303LMi
 Chipset: INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 02:04.0
 Driver: ftp://ftp.support.acer-euro.com/notebook/TravelMate_4000_4500/driver/a802.zip
 Other: Works fine with WEP under Debian Sarge with kernel 2.6.10.
 Chipset: Broadcom BCM94306, MANFID=02d0,0417
 Driver: Ndiswrapper 1.0.2rc2 and XP driver from e-machines
 Other: Debian unstable with Linux kernel 2.6.10.  Works with WEP, and with WPA via wpa_supplicant.

 Laptop: Acer Extensa 4014NWXWi
 Chipset: Atheros AR5007EG
 pciid: 168c:001c
 Drivers: http://www.atheros.cz
 x86_64 driver: http://members.driverguide.com/driver/detail.php?action=download&driverid=949983

 Card: "AirForce One 54g'' 802.11g Wireless LAN Controller
 Chipset: Broadcom BCM4318 (rev 02)
 PCI ID: 14e4:4318
 Driver: ftp://ftp.us.dell.com/network/R108904.EXE

 Card: Airlink+ 802.11g Model#AWLC3025
 Chipset: TI ACX111 Cardbus, shows as abocom systems Inc: Unknown device ab80
 Driver: Ndiswrapper 1.0.8 and XP drivers from CD
 Other: $18 at Frys... Works perfect using Knoppix 3.6, 2.4.27 AND 2.6.7. hdinstalled, but no doubt it would work from USB key, ndiswrapper is preinstalled.
 Other: Works on Fedora Core 3  It locked up my laptop when initially loaded with the stock 2.6.9-1.681_FC3 kernel.  After installing the 2.6.9-1.681_FC3.stk16  16K stack kernel as recommended on the Distribution page the driver loaded and "just worked".  The steps in the Installation page and the Distribution page were awsome and worked perfectly.

 Card: Airlink+ 802.11g Model AWLC3026
 Chipset: Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03)
 PCI ID: 11ab:1faa
 Driver: Ndiswrapper 1.18 and the Windows XP driver from this package: http://www.3com.com/products/en_US/result.jsp?selected=6&sort=effdt&sku=3CRGPC10075&order=desc. Use "unzip'' to extract the .exe package.
 Other: I am currently using this card with Xubuntu 6.10 (Edgy Eft), kernel 2.6.17-10-generic, ndiswrapper package 1.18-1ubuntu2.

 Card: Airlink+ 802.11g Model AWLH3026T
 Chipset: Ralink RT2561
 PCI ID: 1814:0302
 Driver: Ndiswrapper 1.38 and the Windows XP 32-bit driver from the CD.  Also tested with Airlink''s current (as of 3 April 2007) online package: http://airlink101.com/support/index.php?cmd=files&_a=download&id=135. Use "unzip'' to extract the .bin, .sys, and .inf files.
 Other: I am currently using this card with Fedora Core 6, kernel 2.6.20-1.2933.fc6, ndiswrapper package 1.38-1.lvn6.

 Card: Airlink+ 802.11g Model AWLH3025
 Chipset: TI ACX111
 pciid: 1046:9066
 Driver: http://www.airlinkplus.com/driver/11g/awlh3025_v6_0_5_30_xp.zip
 Other: Cheap at Fry''s. Make sure your kernel does not have "use 4k stacks'' enabled.

 Card: Airlink101 Total 802.11 Super G, 108Mbs Model# AWLH4030
 Chipset: Atheros AR5212
 pciid: 168c:0013
 Driver: net5211 from http://www.netgate.com/support/Drivers/Atheros/atherosv24driver.zip
 Other: I couldn''t get the card to work with the driver on the CD, so I tried the driver from the above website. It has worked flawlessly since I installed it. I am running Fedora Core 3.

 Card: Airlink101 802.11 Super G USB 2.0 Adapter, 108mbs Model# AWLL4030
 Chipset: Atheros 
 usbid: 0cf3:0001
 Driver: athfmwdl & net5523 from http://www.airlink101.com/support/index.php?cmd=files&_a=download&id=115&prosupport_client=aeea331ccf404bff933582c007e1380a
 Other: This model needs two drivers installed: athfmwdl and net5523. Download the drivers from the main website above.

 Card: Airlink101 Total 802.11 Super G, 108Mbs Model# AWLL3026
 Chipset: Atheros AR5212
 pciid: 168c:0013
 Driver: awll2016 from http://www.airlink101.com/support/index.php?cmd=files&_a=download&id=114&prosupport_client=cf4d4c0fb468e566ddc772c8b70c8cff
 I am running Fedora Core 4.

 Card: AirVast IEEE 802.11b PRISM3 USB rev 1.32
 Laptop: Gericom X5 Force32 P14G (may have another name, AGAT X152 in my case)
 Chipset: Intersil Prism2/2.5/3
 usbid: 50c2:4013
 Driver: WinXP driver for D-Link DWL-122. Get latest driver from ftp://ftp.dlink.com/Wireless/dwl122/Driver. Tested with driver version 102. I am using Fedora Core 4, kernel 2.6.11 and ndiswrapper 1.38. Use ndiswrapper -d 50c2:4013 netprism to create alias.
 Other: Seems to work fine with 128-bit WEP, no SSID broadcast, shared key. WPA-PSK-TKIP seems supported but not tested yet.
 Other: this card is also supported by linux-wlan-ng 0.2.7 but with WEP only (no WPA).

 Card: Averatec 3200/6100 Series Laptop
 Chipset: RaLink? RT2500
 pciid: 1814:0201 (rev 01)
 Driver: ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Seems to work great so far. No hic-cups at all. I tried the official source RT2500 driver before this, which is horrible. Ndiswrapper is definitely the way to go for this chipset.  Note that not all Averatecs have the RT2500, some have the broadcom 54G.

 Card: Asante AL5410-G 802.11g Wireless Cardbus Adapter Card
 Chipset: TI Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: US Robotics http://www.usr.com/support/5410/5410-files/USR11g_4.0q_919.exe Also available: zip file from Linuxant
 Other: Seems to work great with US Robotics driver.  Asante''s driver fails to load with page allocation error.  Ndiswrapper 0.9.  Mandrake 10.1 Community.  Kernel 2.6.8.1-10mdk-i586.
 Update: I have used both US Robotics version 6.0b14 and Asanté''s driver, v2. Both have worked perfectly! And these drivers bring support for WPA. Get them at their sites (Asante''s and US Robotics'')

 Card: Ashton Digital''s WRUB-2011i AirDash wireless USB stick
 Chipset: TI Texas Instruments ACX 111 54Mbps Wireless Interface
 lsusb ID 124a:4017 AirVast PC-Chips 802.11b Adapter
 Driver: Ashton Digital Windows XP Driver from CD
 Other: worked first attempt with ndiswapper 1.9 + FC5 Test2 Kernel 2.6.15-1.1878_FC5 likely work for anyone else.

 Card: Asante AL5410-G 802.11g Wireless Cardbus Adapter Card
 Chipset: TI Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: Asante Windows XP Driver http://www.asante.com/downloads/AL5410-G_WinXP_DR.zip
 Other: Work great with: Ndiswrapper 0.11 Slackware 10.0 Kernel 2.6.9

 Card: Asus A8V Deluxe Wireless Edition (Cardname unknown)
 Chipset: RaLink RT2500
 pciid: 1814:0201 (rev 01)
 Driver: Used the WinXP driver from the CD provided by ASUS. Works out of the box. Haven''t tried WEP/WPA yet.
 Other: ndiswrapper 0.12+1.0rc2-1, ubuntu kernel 2.6.10-5-k7

 Card: Asus motherboard A8V-E DELUXE Wireless Edition (Cardbus 88W8310 and 88W8000G), also called Asus WiFi-g TM
 Chipset: Marvell Libertas 802.11g client chipset (rev 07)
 pciid: 11ab:1fa7 (rev 07)
 Driver: Used the WinXP driver from ASUS ftp://ftp.asus.com/pub/asus/lan/wifi-g/WIFI_V2712_64bit.zip (also with CD provided by ASUS). 
 Other: ndiswrapper-1.8, Kernel-2.6.14-1.1656_FC4 (x86_64), Fedora Core 4 x86_64.

 Card: Asus A7N8X Deluxe with 802.11b extension
 Chipset: RaLink RT2400/RT2460
 pciid: 1814:0101
 Driver: don''t use the driver provided on the CD, they will crash (a few seconds after ndiswrapper loading) ; also, 2.4 kernels crash after you put interface up. I had to use a 2.6 kernel and those drivers http://www.ralinktech.com/drivers/Windows/IS_RT2460_WPA_031804_Drv2.01.00.zip
 Other: ndiswrapper 0.11, debian kernel 2.6.8-1-k7 ; WEP 128 works

 Card: Asus L5000D(L5826DFWH),Broadcom 4306 54mbps
 Chipset: BROADCOM,  4306 
 pciid: 14e4:4320 (02:02)>
 Driver: ASUS Windows Driver / Asus WLAN Utilities need to be installed on Windows System to access .inf files!
 Other: Ndiswrapper 0.10.3; SuSE 9.2 in 32bit Mode (as far as I know there is no 64bit ndiswrapper available yet - november 2004); 54mbs available;   suse-kernel 2.6.x (tried several ones! works!)

 Motherboard: Asus P5W DH Deluxe
 Chipset: RTL8187
 usbid: 0bda:8187 Realtek Semiconductor Corp.
 Driver: Windows98SE/ME driver from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8187
 Other: Ndiswrapper utils version : 1.8; Ndiswrapper driver version : 1.23; Ubuntu 6.06 LTS

 Laptop: Tarox
 Chipset: RTL8187B
 usbid: 0bda:8189 Realtek Semiconductor Corp.
 Driver: Windows98SE/ME driver (Windows XP,2000 Driver do not work)
 Other: Tested with SuSE Linux 10.3 and ndiswrapper 1.9

 Laptop: Asus A4K
 Chipset: ASUS ZD1211 802.11b+g Wireless LAN
 Card: Asus WL-159G
 Driver: ndiswrapper 1.8-0.lvn.1.4  ZD1211U.sys and ZD1211U.inf from ASUS A4K CD (WL-159G) 
 Other: Tested on Fedora Core 4 linux i686. Installed using yum and livna repo. 

 Card: Asus WiFi-g TM - P5GD2 Deluxe Motherboard
 Chipset: Marvell 88W8310 (Marvell Libertas 802.11b/g)
 pciid: 11ab:1fa7 (rev 07)
 Driver: ASUS Windows XP Driver / ASUS Windows 2k Driver
 Other: If you use windows 2k driver ndiswrapper works fine: if you use this driver, with newer versions of ndiswrapper it''s all ok: there isn''t a kernel panic when we set essid.
 Driver (64-bit): ASUS Windows XP x64 WiFi-g Driver ftp://ftp.asus.com/pub/asus/lan/wifi-g/
 Other (64-bit): Works with ndiswrapper 1.2 and ASUS 64-bit wifi-g driver 2.7.1.2 on Gentoo Linux with 2.6.13 kernel.  I haven''t tested other ndiswrapper versions or configurations.

 Card: Asus spacelink WL-100G, 54mbps
 Chipset: BROADCOM, 4320 (rev 03)
 pciid: 14e4:4320 (rev 03)>
 Driver: ASUS http://support.asus.com/download/download.aspx?model=WL-100g&SLanguage=en-us

 Card: Asus spacelink WL-100G, 54mbps
 Chipset: BROADCOM, 4320 (rev 02)
 pciid: 14e4:4320 (rev 02)
 Driver: Use driver for Dell Truemobile 1300
 Other: heavily used with Ndiswrapper from 0.8 to 0.10. Managed and Ad-Hoc Mode. Works very well on 2.6 kernel series on crux distro (see crux.nu)

 Card: Asus  WL-100GE, 54mbps
 Chipset: BROADCOM, 4318
 pciid: 14e4:4320 (rev 03)>
 Driver: ASUS (The Driver for W2k from the CD works fine)
 Other:  Tested on Suse 10.2, WEP 128b works

 Card: Asus WL-169Ge, 54mbps USB w/ Afterburner
 Chipset: Broadcom - BCM4320SKFBG
 PciId: 0b05:1717
 Driver: Download latest from ASUS website - CD drivers do not work.
 Other: Start with device unplugged. Install driver with bcmrndis.inf, then copy rndismpk.sys & usb8023k.sys (in lower case) to /etc/ndiswrapper/bcmrndis/ - check driver install. Put BUS=="usb", SYSFS{idProduct}=="1717", SYSFS{idVendor}=="0B05", RUN+="/bin/sh -c 'echo 1 > /sys/$devpath/device/bConfigurationValue'"
 in /etc/udev/rules.d/99-custom.rules (edgy only), and restart udev. Plug device in. - tested on Linux Mint (Ubuntu 6.10 with media extensions) with  ndiswrapper utls 1.9, ndiswrapper 1.34) - Gladier

 Card: Asus WL-107G, 54mbps Cardbus PCMCIA
 Chipset: RaLink RT2500
 pciid: 1814:0201 (rev 01)
 Driver: Download, ASUS 2.2.7.0 http://dlsvr03.asus.com/pub/ASUS/wireless/WL-107g/Driver_2270.zip
 Other: Ndiswrapper 1.7, Fedora Core 4. The download driver zipfile is unpackaged for easy install, worked without any problems whatsoever using the basic installation steps. Card has zero errors of any sort after 4.5million RX and 2.8million TX packets, WEP 128bit in Managed mode with a Linksys WRT54G. Traffic LED is reversed (problem exists with RT2x00 project drivers as well).

 Card: Asus WL-107G, 54mbps Cardbus PCMCIA
 Chipset: http://www.ralinktech.com RaLink RT2500
 pciid: 1814:0201. Should work for any rt2500-based PCI/PCMCIA/MiniPCI card listed http://ralink.rapla.net/ here
 Driver: http://www.ralinktech.com/drivers/Windows/IS_AP_STA_6x_D-1.1.1.0_2500_D-3.2.0.0_RU-1.2.2.0_AU_1.1.0.0_060906_0.0.3.0.exe Ralink''s own windows executable version 3.2.0.0 or http://www.carbon.eclipse.co.uk/ralink/ralink3.2.0.0.tar.gz extracted and re-tarballed
 Other: Perfect WPA (Proper security)! Ndiswrapper 1.21 (latest stable), Debian Etch (linux 2.6.16). LED reversal problem fixed (now led is lit only for traffic). Consistent, stable 1.3MB/s with WPA! BTW, I''ve diffed the win2k and winXP drivers, and they''re identical. 20060724.

 Card: Asus WL-138G, 54mbps
 Chipset: Marvell W8300
 pciid: 11ab:1fa6 (rev 07)>
 Driver: CDROM, ASUS http://support.asus.com/download/download_item_nn.aspx?model=WL-138g
 Works with amd64 and 64 bits driver taken here: ftp://dlsvr01.asus.com/pub/ASUS/lan/wifi-g/WIFI_V2712_64bit.zip
 Other: Works well with Ndiswrapper 1.0 and CDROM WinXP driver on Gentoo with Kernel 2.6.11. ASUS Downloaded driver fails.; Problems with new driver versions and ndiswrapper 1.x (System Freeze), but the driver on CD mrv8k51 (ASUS,12/24/2003,2.2.0.20) works fine with ndiswrapper 1.5 (1.6rc2 is more stable) on linux 2.6.14.2 and 16kstacks (I will test if it works without the 16k patch). Works better with win98 driver for the card D-Link DWL-G510 ftp://ftp.dlink.com/Wireless/dwlg510/Drivers/dwlg510_driver_100.zip (manual directory). 
 Other: Ubuntu Dapper comes with a native, but not working Marvell driver http://www.saillard.org/linux/mrv8k/. To use ndiswrapper, you must prevent it from loading at boot, e.g. by removing the mrv8k.ko file from /lib/modules/...kernel....  The DLink Win98 driver works, but I see a few system freezes.  Using the newer, downloaded Asus Win98 driver (after renaming mrv8ka50.sys to mrv8ka51.sys) the system often hangs at boot, but is more stable afterwards. With both drivers, booting is slow.
 Other: The above versions causes kernel freeze/panic on Ubuntu Edgy (Ndiswrapper module version 1.22, Kernel: 2.6.17-10-generic). A workaround is yet to be found...  
 Other: The 64-bit driver mentioned above - which doesn''t work with winxp sp2 on my box :) - works well on my 32-bit athlon and seems to be the only driver allowing WPA2 connection. (kernel: 2.6.19-gentoo-r4, ndiswrapper-1.34, wpa_supplicant-0.5.7)

 Card: Asus WL-138G V2, 54mbps
 Chipset: BCM4318 PCI
 PCI ID: 14e4:4318
 Driver: CDRom, WinXP driver. (bcmwl5, ASUS, 02/11/2005, 3.100.64.0)
 Linux: 2.6.21-rc5 
 Ndiswrapper: 1.39 (smp=no)
 Other: Only ndiswrapper is working. Both 2.6.21-rc5 bcm43xx driver and wireless-git bcm43xx driver are not working with 802.11b card on the other end.

 Card: Asus P5WD2 Premium Motherboar with Wi-fi/Tv Hybrid
 Chipset: cb55n5x PCI
 PCI ID: 11AB:2A01
 Driver: WinXP driver. (cb55n51.sys)
 Linux: Kubuntu 7.04 (kernel 2.6.20)
 Ndiswrapper: 1.43 (smp=yes)
 Note: AP (master) mode not supported

 Card: Asus WL-161, 11mbps
 Chipset: Sis162u USB
 usbid: 2821:0161
 Driver: CDRom, WinXP driver. (sis162u.inf, original at www.sys.com)
 Other: Use "ndiswrapper -d 2821:0161 sis162u"... to get Hardware present. It works perfect on 11 mbps! 

 Card: Asus WL-167G, 54mbps
 Chipset: Ralink RT2500 USB
 usbid: 0b05:1706
 Driver: Cdrom, WinXP driver. (rt2500.sys, original at www.ralinktech.com)
 Other: Tested with Ndiswrapper 0.11, kernel 2.4.27, Knoppix. All thanks to ndiswrapper! B-)

 Card: ASUS WL-167G
 Chipset: RT2500USB
 usbid: 0b05:1706
 Driver: 2.00.01.0000 (http://www.ralinktech.com)
 Other: Mandriva LE 2005 (kernel-2.6.11), ndiswrapper-1.2rc1. Must install Kernel-Source 2.6-2.6.11-6mdk to compile ndiswrapper, use "ndiswrapper -d 0b05:1706 rt2500usb"... to get Hardware present, works at 54 Mb Great !! No need to recompile kernel, it just works fine. Thanks, Thanks !! Well done.

 Card: ASUS WL-167G
 Chipset: Ralink RT73
 usbid: 0b05:1723
 Driver: Win XP Driver from CD Rom (RT73.sys, RT73.inf)
 Other: Ubuntu Edgy Eft 6.10 (kernel-2.6.17)

 Card: AT&T Plug&Share 6700G
 Chipset: Atheros
 pciid: 168C:0013
 Driver: http://www.plugandshare.att.com/plugandshareui/support/downloads.cfm
 Other: Works with WEP and WPA

 Card: Atheros AR2413 / AR5005G
 Chipset: Atheros Communications, Inc. AR2413 802.11bg NIC (rev 01) (by lspci command) 
 pciid: 168c:001a
 Driver: net5211 - 802bg.zip (from ftp://ftp.work.acer-euro.com/notebook/travelmate_2310/driver/802bg.zip or try other in http://support.acer-euro.com/drivers/notebook/tm_2410.html. Original from Toshiba doesn''t recognized by ndiswrapper. There are others from other sources, but this one is already working good for me)
 Other: OS:  Ubuntu 7.10 - Gutsy Gibbon, Ndiswrapper version: 1.45; utils: 1.9; (from the Ubuntu repository), Other info: Switched from ATH_PCI (Madwifi) to Ndiswrapper because this one is so intermitent, and the signal is so weak comparing with other OS (Windows XP). Sometimes the network goes down, apparently without motif.

 Card: Atheros AR5001X+ 54mbps
 Chipset: Atheros
 pciid: ?
 Driver: ?
 Other: Ndiswrapper 0.9. Works!!! Dmesg shows RTS, Powermode and fragmentation failures but it still works!!!

 Card: Atheros AR5418
 Chipset: AR5418
 pciid: 168c:0024
 Driver: 7iwc21ww.exe (use cabextract to extract files) from http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66449
 Other: Tested with ndiswrapper 1.42 (svn revision 2315) and kernel 2.6.21-smp. Just tested IEEE 802.11bg, not a or n and just WEP. Also tested ndiswrapper 1.43 on kernel 2.6.20. On vanilla kernels, it''s necessary to disable CONFIG_4KSTACKS by enabling "Kernel Hacking'' and making sure the option to use 4K stacks is disabled.

 Card: Atlantis-land PCMCIA A02-PCM-W54, 54mbps
 Chipset: Ralink RT2500''
 pciid: 1814:0201 (rev 01)
 Driver: ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: I own Compaq Presario 907 EA Laptop, with installed Suse 9.1 Personal, i must upgrade it on Professional before i can install "ndiswrapper 0.12", and also i must uninstall old version of "ndiswwrapper 0.8" which was installed in 9.1 Personal, i followed relative instruction of distributions installation.

 Card: Atlantis-land PCI A02-PCI-W54, 54mbps "old release"
 Chipset: Ralink RT2500 (RT2525)
 pciid: 1814:0201
 Driver: ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip (WinXP)
 Other: I am running Debian unstable, so the first try has been to install the debian packake for ndiswrapper, but it worked not very well: I had problems setting essid when starting the interface, and after starting it stopped randomly losing the association with the access point several times. Moreover I got a lot of Tx excessive retries and Invalid misc. So I tried the last nightly tar ball (as of 12-22-2004) and now everything seems to work.

 Card: Atlantis-land PCI A02-PCI-W54, 54mbps
 Chipset: Marvell Libertas 88w8335
 pciid: 11ab:1faa
 Driver: 
 Other: This seems to be a "new release"; same model name, totally different chipset.

 Card: Atlantis-Land Wireless USB Adapter (A02-UP-W54). 54mbps
 Chipset: SiS163
 usbid: 0457:0163
 Driver: http://www.atlantis-land.com/firmware/3463_A02-UP-W54%5BV10-20%5D.ZIP
 Other: I mount this on a slackware 10.2 with a 2.4.31 stable kernel. The device work very well!

 Card: AVM FRITZ!WLAN USB Stick
 Chipset: http://focus.ti.com/general/docs/bcg/bcgprodcontent.tsp?templateId=6116&navigationId=12679&contentId=4043 TNETW1450 (TI Texas Instruments)
 usbid: 057c:5601
 Driver: ftp://ftp.avm.de/cardware/fritzwlanusb.stick/windows.xp/deutsch/avm_fritz!wlan_usb_stick_build_051018.exe Or on Vendors CD
 Other: Works with latest Version ndiswrapper 1.9 WEP and WPA work; WPA2 works well too (SUSE10; NDISWrapper 1.9 stable; wpa_supplicant v0.4.4)
 Other: With ndiswrapper version 1.20, this card works with 64-bit Windows driver at ftp://ftp.avm.de/cardware/fritzwlanusb.stick/windows_xp_64bit/english/avm_fritz!wlan_usb_stick_x64_build_060421e.exe
 Other: Works for ndiswrapper 1.34 with Kernel 2.6.17-10 on Ubuntu 6.10(Edgy Eft), with WPA2 using wpasupplicant. Driver: ftp://ftp.avm.de/cardware/fritzwlanusb.stick/windows.xp/english/avm_fritz!wlan_usb_stick_build_061228e.exe I haven''t tested the german driver version.

 Card: AVM FRITZ!WLAN USB Stick
 Chipset: http://focus.ti.com/general/docs/bcg/bcgprodcontent.tsp?templateId=6116&navigationId=12679&contentId=4043 TNETW1450 (TI Texas Instruments)
 usbid: 057c:6201
 Driver: ftp://ftp.avm.de/cardware/fritzwlanusb.stick/windows.xp/deutsch/avm_fritz!wlan_usb_stick_build_060406.exe
 Other: Works with latest Version ndiswrapper 1.16 on Ubuntu 6.06 (Dapper)&lt;!&ndash;WEP and WPA work; WPA2 works well too (SUSE10; NDISWrapper 1.9 stable; wpa_supplicant v0.4.4) not yet tested.&ndash;>
 Other: Works on amd64 Gentoo Linux with Kernel 2.6.17, ndiswrapper 1.28. and this driver: ftp://ftp.avm.de/cardware/fritzwlanusb.stick/windows_xp_64bit/english/avm_fritz!wlan_usb_stick_x64_build_060731e.exe
 Other: Works since last ndiswrapper 1.33 with Kernel 2.6.17 on Ubuntu 6.10(Edgy Eft), WPA2 works too. Driver: ftp://ftp.avm.de/cardware/fritzwlanusb.stick/windows.xp/deutsch/avm_fritzwlan_usb_stick_build_060731.exe Sometimes seems to loose connection for some unknown reason.
 64 Bit users: Only the english driver seems to work. Don''t use the german one.

 Laptop: Asus F3Sc
 Chipset: Intel GEN 4965 AGN C 802.11b+g Wireless LAN
 Driver: ndiswrapper 1.381ubuntu1; NETw4x32.INF from Intel http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2753 Choose XP Professional 
 Other: Tested on Kubuntu 7.04. Did not work for me using the GUI, used installation instructions from this site.  Required reboot after modprobe to get it to work. Added ndiswrapper to /etc/modules to get it to work on startup.

 Card: Belkin N1 Wireless USB (802.11n draft)
 Chipset: Marvell 88W8360 USB / TopDog / 8360
 usbid: 1799:8051
 Driver: Driver available on accompanying CD or web
 Other: NOT TESTED! listed here for reference. Reported success on Marvell 8360 entry.

 Card: Belkin F5D8010
 Chipset: Airgo networks Pre-N
 pciid: 17CB:0001
 ndiswrapper: version 1.37
 Distro: Ubuntu 6.10 desktop (kernel: 2.6.17-10-generic)
 PC: Dell Dimension 9200 with Ricoh RL5c475 Cardbus
 New Drivers: http://www.laptopvideo2go.com/forum/lofiversion/index.php/t10239.htmlhttp://www.laptopvideo2go.com/drivers/wlan/
 Works on: Belkin F5D8010, Linksys WPC511GX, Netgear WGM511, Buffalo WLI-CB-G108, AeroGuard AGN1023PC, Planex CQW-NS108AG, Planex CQW-NS108G, Samsung X20 Laptop, GemTek WPCO-131G, Corega CG-WLCB108GM
 Driver: Driver for Netgear WPNT511 http://kbserver.netgear.com/products/WPNT511.asp, version 06/30/2005, 1.5.0.147.
 other: after installation of Ubuntu: needed pci=assign-busses and pci=routeirq (info comming from dmesg as a suggestion) / install ndiswrapper and ndiswrapper-utils1.8 using Synaptic / install drivers with ndiswrapper -i NETANI.INF / ndiswrapper -m / depmod -a / modprobe ndiswrapper / install wpa using info from the following website https://help.ubuntu.com/community/WifiDocs/WPAHowTo

 Card: Belkin 802.11b Wireless Desktop Network Card (F5D6001) (PCI)
 Chipset: RTL8180 Board: V1799 F5D6001 Rev 2.0
 pciid: 1799:6001 (rev 20)
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 (click on) ndis5x-8180(170).zip
 Other: This PCI card works with ndiswrapper v0.10 when you use RTL8080 driver, not Belkin driver. The PCIID of this card is different from Realtek driver''s supported PCIID, so you need to tell ndiswrapper to use realtek driver for 1799:6001. So execute "ndiswrapper -d 1799:6001 net8180". Now make sure ndiswrapper got it right by checking the output "ndiswrapper -l". It should print "net8180 driver present, hardware present".
 Other: Card also works using (173).zip driver, with Ndiswrapper 1.7 on 2.6.15-rc7 and 1.8 on 2.6.15 (with 4K stacks!) on a debian box.

 Card: Belkin 802.11b Wireless Desktop Network Card (F5D6001au) (PCI)
 Chipset: RTL8180 Board: Belkin Wireless PCI Card - F5D6001au (Ver.3001au)
 pciid: 1799:6001 (rev 20)
 Driver: http://www.belkin.com
 Other: Using Fedora 3 kernel-2.6.9-1.667.stk16.i586.  This PCI card works with ndiswrapper v0.12 when you use the Belkin driver supplied on CD with the card (probably also with the drivers available at http://www.belkin.com). The PCI card did not work with ndiswrapper v0.12 and the RTL8080 driver. Neither driver worked with ndiswrapper-1.0rc3. Just follow the standard ndiswrapper installation instructions.

 Card: Belkin F5D6020
 Chipset: RealTek? 8180
 pciid: 1799:6020 (rev 20)
 Driver: Belkin http://web.belkin.com/support/download/downloaddetails.asp?file_id=1431 RealTek? ftp://202.65.194.18/cn/wlan/rtl8180l/ndis5x-8180(173).zip 
 *Toshiba Satellite 4015CDT, Debian Sarge, kernel 2.6.8 / ndiswrapper 0.10. The Belkin driver did not work for me, it loaded but failed to do anything useful whatsoever. An ndiswrapper -l using the realtek driver reported the hardware not present. By copying the Bel6020.inf file from the Belkin driver and the rtl8180.sys file from the realtek driver into the same directory, and replacing every instance of the string "Bel6020.sys" with "rtl8180.sys" I was able to get the card work satisfactorily. "(Best Solution)''
 * Acer TravelMate 240 series. Follow the same procedure as in Toshiba Satellite above. Tested on debian unstable, 2.6.16-2-686 kernel with headers. I have compiled the ndiswrapper(1.6) module for the kernel from source, since apt-get did/does not install it.
 *Dell Latitude CPi, Debian Sarge, kernel 2.6.7 / Ndiswrapper 0.10-1. After first trying with the Belkin driver, fiddeling the mode back and forward between Ad-Hoc and Managed mode without much success I switched driver to the one from RealTek?. Which works without any trouble what so ever. 
 *Other: Dell Latitude C840, Mandrake 10, kernel 2.6.3-15mdk / Ndiswrapper 0.9. WEP works with non-broadcasting essid.  Managed mode requires several attempts to get activated. I have to toggle between the 2 modes (Ad-Hoc and Managed) to get the link LED on the PCMCIA card to lit up.
 *IBM Thinkpad T23, Debian testing, kernel 2.6.10, ndiswrapper 1.1rc1@050217 (nightly). Using the Debian packages did not work, so first get rid of packages ndiswrapper-source/utils/modules, then install the nightly build (both utils and driver of course). Then download the ndis-driver from realtek, and install with ndiswrapper -i. By some reason, the .conf-files in /etc/ndiswrapper/net8180/ will be called 10EC:8180.5.conf. Until I changed that into 1799:6020.5.conf (the PCIID you get from lspci -n), the hardware was not detected with ndiswrapper -l.  As I don''t have an AP, I cannot really verify that it works from here, but it looks promising.
 *IBM ThinkPad A22P. Tested on RHEL AS4 update 4 with ndiswrapper v. 1.9.  Download the driver ftp://210.51.181.211/cn/wlan/ndis5x-8180(173).zip and install according to the basic ndiswrapper instructions.  After installing, rename the files in /etc/ndiswrapper/net8180, substituting `10EC'' with `1799'' and `8180'' with `6020'', respectively, to match the PCIID you get from `lspci -n''.

 Card: Belkin Wireless G USB Network Adapter
 Chipset: Unsure
 usbid: 050d:705c
 Driver: On the CD at /files/Driver/blkwgu.inf
 Other: run ndiswrapper -i blkwgu.inf on CD, copy blkwgu.sys to same directory as ndiswrapper puts the inf file. bring up device.  Had problem not being able to use restricted mode and had to switch to open WEP.  Works once i made the switch, pretty straightforward.

 Card: Belkin F5D6050
 Chipset: Atmel at76c503-rfmd
 pciid: 050d:0050
 Driver: Belkin http://www.belkin.com/support/download/files/F5D6050z.exe
 Other: Download the driver. Extract to a new directory using unzip. Extract the CAB files (DATA1.CAB, DATA1.HDR, DATA2.CAB) using "unshield x" . cd Drivers/WINXP . edit bkusb.in_ and uncomment the CopyFile.XP.Sys section. Run ndiswrapper -i bkusb.in_ as root followed by ndiswrapper -m . modprobe ndiswrapper. ifdown wlan0. ifup wlan0 and you are there.

 Card: Belkin 54g Wireless Desktop Network Card (F5D7000)
 Chipset: BCM4306 Board: V1799 D-7000 Rev 4.5
 pciid: 14e4:4320
 Driver: http://www.belkin.com
 Other: This is PCI, not cardbus. The chipset is marked BCM4306, however the supplied utility in win98 detects "BCM4306/BCM2050", and Linux utilities have variously reported; BCM4306, BCM4320, BCM94306. This card has been stable on a Slackware SMP system with ndiswrapper-0.8 since released, versions 0.7 and 0.9 do not work with the SMP kernel.

 Card: Belkin 54g Wireless Desktop Network Card (F5D7000) Rev 02
 Chipset: BCM94306
 Driver: From Installation CD
 Other: It is working on Slackware 10 (kernel 2.4.25 and kernel 2.6.8.1) Also working on Gentoo (using various 2.6.x kernels), however from ndiswrapper > 0.8 the Belkin drivers did not work at all (Oops at modprobe, system lockup); I used the Dell drivers (see the rev 03 entry following this one) instead, and now I''m happily running 0.11.

 Card: Belkin 54g Wireless Desktop Network Card (F5D7000) Rev 02
 Chipset: BCM4306
 Driver:  http://www.belkin.com/support/download/downloaddetails.asp?file_id=1425 F5D7000-V2.4.5.EXE, or for your convience the individual driver files are available for download from my website at http://www.pdxn.net/drivers/f5d7000_v2.html
 Other: Ndiswrapper 1.2 on Debian Sarge running Kernel version 2.6.8-2-686

 Card: Belkin 54g Wireless Desktop Network Card (F5D7000) Rev 03
 Chipset: BCM4306
 pciid: 14e4:4320
 Driver: http://ftp.us.dell.com/network/R81433.EXE (use bcmwl5a.inf in directory AR)
 Other: I tried to use the belkin driver (bcmwl5.inf) but the whole system just locked up as soon as I modprobed ndiswrapper. Apparently the belkin driver works for the older rev 02 cards, but not rev 03. So I''m suggesting this for folks with the Rev 03 card. You can check the revision by doing a "lspci" The Dell driver has been working great for me, for about a day.
 Other: The rev.03 problem is probably not all that sinister. It is caused by the presence of the NetworkType|0 line which ends up in the*.conf files (from the *.inf driver file).  Removing this allows the supplied Belkin driver to work, although I''d probably recommend using the Dell R81433.exe driver anyway if only because it''s a later version. For non-US users you may wish to edit the Channel parameter to be 13 (Europe) (or 14 in Japan?). Applies to both PCMCIA and PCI versions (F5D7000 and F5D7010).

 Card: Belkin 54g Wireless G Desktop Card (F5D7000) (Version 5100)
 Chipset: Atheros AR5005G NIC (Rev 01)
 Driver: Standard Belkin Driver that came with the Installation CD
 Other: Installed on Suse Linux 10.1 with ndiswrapper 1.10-19 (the version that came with Suse Linux 10.1) - installed with instructions from this link: http://ndiswrapper.sourceforge.net/mediawiki/index.php/Suse_Professional_9.2

 Card: Belkin 54g Wireless G Desktop Card (F5D7000) Rev4000
 Chipset: BCM4318
 Driver: Driver: ndiswrapper v1.3 with bcmwl5a.inf ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/ (Broadcom, 12/22/2004, v3.100.46.0)
 Other: 10/29/2005 - added this entry because Belkin is now using this Broadcom chipset and not the rt2500 anymore.  A pity as the rt2500 has awesome native linux drivers.  Ndiswrapper works beautifully on my Slack 10.2 desktop with 2.6.13 kernel.

 Card: Belkin 54g Wireless G Desktop Card (F5D7000) Rev5000
 Chipset: Atheros
 pciid:  1113:1211
 Driver:  Unknown.  CD drivers don''t work on ndiswrapper 1.10 on a Suse 9.2 installation. (invalid driver error)

 Card: Belkin 54g Wireless Desktop Network Card (F5D7000UK)
 Chipset:
 pciid:
 Driver: Standard belkin driver
 Other: Just added this so that people know that the UK variation can be used. I used the standard belkin driver, but you need to install it to somewhere in windows to extract the relevant sys and inf files. Works like a charm with fedora core 2 and fedora core 3 (though with fc3 you will need to download the kernel source rpm as it doesn''t come with the standard package).
 Other:Finally works on my system (the card says "version 1133uk", Debian woody, kernel 2.4.28, ndiswrapper 0.11, Dell drivers, hand-compiled wirless-tools v27). Here are a few hints if you''re having trouble: (i) try different combinations of ndiswrapper version and driver (Belkin, Dell). (ii) make sure wireless extension version of your wireless-tools matches the one of ndiswrapper (Debian woody wireless-tools were too old, iwconfig wouldn''t work), see http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.htm for more information. (iii) wireless won''t work if your machine also has another network card connected to the same network.

 Card: Belkin 54g Wireless Network Card F5D7000uk
 Chipset: Broadcom BCM4306
 pciid: 14e4:4320
 Driver: Standard Belkin driver on their CD.  File is BCMWL5.INF
 Other: Works like a charm on this Mandrake 10.1 system here, I was very pleasantly surprised.  Just followed the instructions in the docs and it worked!  Used the Mandrake configuration tools for wireless network setup (Control Centre &rarr; Network & Internet &rarr; Manage Connections, select the wireless card).

 Card: Belkin 54g Wireless Network Card F5D7000uk
 Chipset: Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
 pciid: 1814:0201
 Driver: Ndiswrapper 1.1 and Rt2500.INF file from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Debian stable Sarge (2.4.27-2-386) works a treat. I followed the "InstallDebianSarge" instructions which were great. In the end however, I didn''t need the "Install latest Ndiswrapper" section as version 1.1 comes already available. Also, needed unzip utility (apt-get install unzip). Cheers!.

 Card: Belkin 54g Wireless Network Card F5D7000uk
 Chipset: Unknown, lspci gives "Belkin Unknown device 700f (rev 20)''
 pciid: 1799:700f
 Driver: Ndiswrapper 1.45, driver from CD - blkwgdv7
 Other: Ubuntu 7.10 (Gutsy), but installed under 7.04 by uninstalling supplied version using instructions on this site, and installing latest version. Didn''t work properly (crashed system) until upgrade, so suspect kernel issues. Now using 2.6.22-14.  

 Card: Belkin F5D7001 Highspeed Wireless 128Mbps Desktop Network Card
 Chipset: BCM4306
 pciid: 14e4:4320
 Driver: http://ftp.us.dell.com/network/R81433.EXE (use bcmwl5a.inf in directory AR)
 Other: The card is working however I am not sure about the advertised speeds. I will update later. Used ndiswrapper on a Fedora Core 2 distro. Dell driver worked better than the Belkin CD. It works on Suse Linux 10.1 with the cd, without problem and with advanced speed, however if you use dell driver it keeps disconnecting!

 Card: Belkin F5D7010
 Chipset: Broadcom 94306
 pciid: 14e4:4320
 Driver: Dell http://ftp.us.dell.com/network/R76521na.EXE, Emachines http://downloads.emachines.com/network/Broadcom_80211g_3_20_23_0.zip, Compaq ftp://ftp.compaq.com/pub/softpaq/sp23001-23500/SP23067.exe
 Other: Gentoo 2.6.7 w/ Ndiswrapper 0.9. WEP works with non-broadcasting essid. WPA works with broadcasting essid with either AES or TKIP ciphers.

 Card: Belkin F5D7010 54g (802.11g and 802.11b capable) 32-bit CardBus wireless card (Rev 5000)
 Chipset: AR5211 (Atheros Communications, Inc. AR5211)
 pciid: 168c:001a
 Driver:  WINXPNT drivers from retail CDROM BLKWGN.inf
 Other: Debian sid with ndiswrapper 1.10, everything working well

 Card: Belkin F5D7010 Wireless-G Notebook Adapter
 Chipset: RaLink RT2500
 pciid: 1814:0201 (rev 01)
 Driver: ndiswrapper 0.11 and A-Link ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Debian sid/i386, kernel 2.6.7/9, Inspiron 2650. Tried the linux driver (v1.4.3.0) from http://www.ralinktech.com/ &ndash; module loaded, interface created, but settings for iwconfig don''t get committed. Tried to get NDIS driver off CD but couldn''t locate/extract INF file. Finally tried NDIS driver for another card using RT2500 (the A-Link above), and (so far) it has worked wonderfully.

 Card: Belkin F5D7010 54g (802.11g and 802.11b capable) 32-bit CardBus wireless card
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 14e4:4320 (rev 03)
 Driver: "For older Fedora 3 systems:'' files/Drivers/WinMe98/bcmwl5a.inf on the installation CD worked with Fedora kernel 2.6.9-1.681_FC3 and slightly older with ndiswrapper 0.12.  Slightly newer kernels required upgrading to ndiswrapper 1.1 final.  (WinXP2K/bcmwl5.inf did NOT work.)  "For modern Fedora 4 systems:'' Driver from http://ftp.us.dell.com/network/R94827.EXE (can be unpacked with "unzip" to find bcmwl5a.inf) works with kernel-2.6.14-1.1656_FC4 and ndiswrapper-1.8-0.lvn.1.4 (you can install this using "yum" if you have the livna repository set up) but gives warning "Forcing parameter IBSSGMode|0 to IBSSGMode|2".  Driver on installation CD segfaults on "modprobe", but Giri says this should be fixed in CVS version of ndiswrapper as of 30 Jan 2006.
 Other: See Distributions for details on how to get this particular card working with a Fedora Core 4 install.

 Card: Belkin F5D7010 54g (802.11g and 802.11b capable) 32-bit CardBus wireless card (Rev 02)
 Chipset: BCM4306 (Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02))
 pciid: 14e4:4318
 subsys: 1799:7010
 Driver:  WINXPNT drivers from retail CDROM (date: 2/18/2005 ver 3.100.64.1) bcmwl5.inf
 Other: Ndiswrapper 1.3rc1 on Fedora Core 4 - Kernal 2.6.12-1.1447_FC4.stk16;  Bought from BestBuy 9/22/2005, box has "VER.4100" on the bottom.  Ndiswrapper installation instructions worked with no hitch. Build/installed on a HP Omnibook 6000.
 Does not work with ndiswrapper.ko supplied with kernel 2.6.18.5 supplied with Vector Linux 5.8 or 2.6.12mdk supplied with Mandriva 2006.  Works with new module compiled from ndiswrapper 1.3.4.  

 Card: Belkin F5D7010au 54G Wireless Notebook Network Card 32-bit CardBus (VER.1224au sticker on bottom of box)
 Chipset: BCM4306/BCM2050 reported by Windows 2000
 pciid: 14e4:4320 
 Driver:  http://ftp.us.dell.com/network/R81433.EXE (use bcmwl5a.inf in directory AR).  Used "unzip'' to extract files from R81433.EXE. The driver from the CD (bcmwl5.inf) froze my machine (see notes above for F5D7000 starting "The rev.03 problem is probably not all that sinister", I think they apply). Tried R81433.EXE but this wouldnt associate with AP in Managed mode, only Ad-hoc, and then wouldnt work properly.
 Other: Ndiswrapper 1.7 Centos4.1 Kernel r2.6.9-11.EL on A Compaq EVO N160

 Card: Belkin F5D7011 802.11g PCMCIA Wireless LAN Adapter
 Chipset: Broadcom 94306
 pciid: 14e4:4320
 Driver: Dell ftp://ftp.dell.com/network/R81435.EXE
 Other: Fedora Core 3 w/ Ndiswrapper 0.11, Ubuntu 5.0 w/ Ndiswrapper 0.12. Download the exe, unzip it with "unzip -a" and use the bcmwl5.inf in directory AR.

 Card: Belkin F5D7050 (USB 2.0 Adaptor 802.11g 54Mbps)
 Chipset: Conexant (PrismUSB)
 usbid: 050D:7050
 Driver: Install the drivers for windows included in the box and fetch the .inf and .sys fyles from the installation directory.
 Other: linux-2.6.9: Blocks Linux momentarily when another device is plugged into the same USB Hub, more precisely a 1.1 memory stick.
 Other: SuSE 9.1, kernel-2.6.8-default (kernel-of-the-day 22 Dec. 2004): 1.0rc1 with bknUSB.inf from the vendor CD and WEP security works quite stable. The procedure as described in WiKi/SuSE 9.1. Professional.
 Other: SuSE 9.1, kernel-2.6.x-smp: doesn''t work, "modprobe ndiswrapper'' freezes the system.

 Card: Belkin F5D7050 (USB 2.0 Adaptor 802.11g 54Mbps)
 Chipset: RT2500
 usbid: 050d:7050
 Driver: Install the drivers for windows included in the box and fetch the .inf files from the installation directory.
 Other: Works fine. When entering in resume mode, freeze the system.

 Card: Belkin F5D7050B (USB 2.0 Adaptor 802.11b/g 54Mbps) ("version 3000uk" only tested at this time)
 Chipset: RT73
 usbid: 050d:705A
 Driver: Install the drivers for windows included in the box and fetch the .inf files from the installation directory.
 Other: Works fine with WPA(PSK-TKIP) using wpa_supplicant on ubuntu 6.06 with ndiswrapper driver. Will freeze the system if removed without ifdown and/or ifconfig down on the device, and even then sometimes. Even though WPA works, I have not yet managed to succeed in using with WEP!

 Card: Belkin FSD7050 (or is it F5D7050) (USB 802.11b/g 54 Mbps) bought in UK 2005
 Chipset: rt73
 usbid: 050d:705a
 Driver: I took drivers off CD (WinXP version, under W2KXP folder), copied all three files rt73.inf, rt73.sys, and rt73.cat to a folder in MEPIS Linux. 
 Other: Works fine with WEP 128 bit encryption to Belkin AP/router, would like to use WPA! Worked with ndiswrapper already installed in MEPIS which was downloaded from MEPIS site Nov 28th 2006.

 Card: Belkin F5D7050E (USB 2.0 Adaptor 802.11g 54Mbps)
 Chipset: Accton Technology Corp.
 usbid: 083a:f503
 Driver: Install the drivers for windows included in the box and fetch the .inf files from the installation directory.
 Other: Suse 10.1, kernel 2.6.16.13-4-default, ndiswrapper 1.20rc1
 Other: Works fine. Stops working from time to time requiring an unplug-replug.

 Card: Belkin F5D7051 (USB 2.0 Adaptor 802.11g 125Mbps)
 Chipset: BCM4320
 usbid: 050d:7051
 Driver: Install with bcmrndis.inf. However, this doesn''t copy rndismpk.sys and usb8023k.sys files as needed, so copy these .sys files in lower case by hand so that after that there are following files in /etc/ndiswrapper/bcmrndis: 050D:7051.F.conf 1799:7051.F.conf bcmrndis.inf rndismpk.sys usb8023k.sys
.Note that with 2.6.16 and later kernels, udev needs to be configured for this rndis device: See entry for USR5421 below for details.
 Other: Tested on Mandriva 2006 Free - ndiswrapper 1.13
 Other: Tested on Mandriva LE 2005 - ndiswrapper 1.34
 Other: Keyboard freezes on hotpluging.

 Card: Belkin F5D8010
 Chipset: Airgo networks Pre-N
 http://www.laptopvideo2go.com/forum/lofiversion/index.php/t10239.htmlhttp://www.laptopvideo2go.com/drivers/wlan/
 Works on: Belkin F5D8010, Linksys WPC511GX, Netgear WGM511, Buffalo WLI-CB-G108, Buffalo WLI-CB-AG108HP, AeroGuard AGN1023PC, Planex CQW-NS108AG, Planex CQW-NS108G, Samsung X20 Laptop, GemTek WPCO-131G, Corega CG-WLCB108GM
 Driver: Driver for Netgear WPNT511 http://kbserver.netgear.com/products/WPNT511.asp, (NETANI.INF) and ndiswrapper version 1.23 ONLY- broken in 1.24

 Card: Belkin F5D8001 N1 Wireless Desktop Card (rev 01)
 Ndiswrapper version: 1.22
 Chipset name: Athereos Communications, Inc. Unknown device 0023 (rev 01)
 PCIID: 168c:0023 (rev 01)
 Windows driver location: http://www.belkin.com/support/article/?lid=en&pid=F5D8001&aid=5928&scid=0&fid=2587&fn=F5D8001v1_US_1.00.05_W2.exe extract with cabextract, unshield data1.cab, ndiswrapper -i Disk1/DriverXP2K/net5416.inf
 Ubuntu 6.10 on a desktop machine, detected but sometimes cannot change essid to associate with an AP. try using "irqpoll" kernel option.

 Card: Belkin F5D8001 N1 Wireless Desktop Card (F5D8001v2)
 Chipset: Marvell Pre-N
 PCIID: 11ab:2a02
 Driver: Driver for Netgear WN511T (http://firmware.netgear-forum.com/index.php?dlfile=705), Version 08/29/2006, 3.0
 Other: unzip wn511t_3_0_setup.zip, cabextract wn511t_3_0_setup.exe, unshield data1.cab
 Other: Filename is NetMW14x.inf
 Other: ndiswrapper 1.34 on SuSE 10.1
 Other: Hard freezes System when used with some protocols, notably rsync. Downgrading to 802.11g without 802.11e QOS handling seems to avoid this problem.

 Card: Belkin Wireless G Plus MIMO F5D9010
 Chipset: Airgo Networks True G
 Driver: Driver for Netgear WPNT511 http://kbserver.netgear.com/products/WPNT511.asp, version 06/30/2005, 1.5.0.147. 
 Other: Tested with Ddiswrapper 1.1.6.
 Other: Installed on a Dell Lattitude laptop with Fedora Core 4 (kernel 2.6.11).

 Card: Belkin Wireless G USB Network Adapter (F5D7050)
 Chipset: RT73
 usbid: 050D:7050
 Driver: Use the XP ones on the CD. If not download your version (there is a tiny sticker on the back of the box i.e. V3000) from the belkin website
 Other: Does NOT work with ndiswrapper 1.7 (Tested on 1.8 and it is stable)
 Other: Does NOT work on SUSE 9.2 with ndiswrapper 1.10.  Does not detect network; cannot change settings.

 Card: Belkin Wireless G Cardbus PCI F5D7010 ver.7 (Do Not Use the Driver from the CD it only Crashes Ndiswrapper.
 Chipset: Realtek 8185
 Driver: net8185 from (http://www.realtek.com.tw/) Search and Download the windows driver for L8185
 Using Mandriva 2007.0 Kernel 2.6.17-5mdv
 Using Fedora Core 6 Kenel 2.6.19-1.2911.6.5.fc6.stk16 Downloaded new kernel with stack set to 16k from (http://www.linuxant.com/driverloader/wlan/full/downloads-fc6-kernel-i686.php)
 dkms-ndiswrapper-1.37 kernel driver installed in Mandrivia
 dkms-ndiswrapper-1.38 kernel driver installed in Fedora Core 6 (http://freshrpms.net/packages/)
 Installation : Install most current ndiswrapper and dkms for you *nix system as of this writing This card is working in mandriva and fedora. You will have to try it on your distribution of *nix. You have to unzip the driver into a directory you can access. There will be 3 files net8185.inf net8185.sys net8185.cat. Open a terminal and change to user root with su and root password, then type ndiswrapper -i net8185.inf in the folder where you extracted the driver files hit enter. next ndiswrapper -l shows net8185 driver installed we now have to get the device id from root prompt type lspci -n at the bottom of the list is the belkin card card ID info 1799:701f write this down you will need it for the next portion of the installation. Now from root prompt type ndiswrapper -a 1799:701f net8185 hit enter this associates the net8185 driver with the device ID of the belkin card. from root ndiswrapper -l should now show&lt;br>net8185 : driver installed&lt;br>&nbsp;&nbsp;&nbsp;device (1799:701f) present&lt;br>
 from root prompt type modprobe ndiswrapper it will pause for a moment and then the lights on the card should come on. Once the card is running from root prompt type ndiswrapper -m to install an alias for you so the card will activate on boot. Card pulled an ip my mandriva server and associated with the linksys router running dd-wrt 23sp2. On Fedora: As soon as the card is recognized it and the ndiswrapper kernel module loads fine, run 
 ndiswrapper -m (as root). Then add the line alias wlan0 ndiswrapper to /etc/modprobe.conf. After this you can now go to configure it by running the "Network" program from system settings (or just run system-config-network). Select "New" > "Wireless connection". The card should show up like "wlan0 (ndiswrapper)". Proceed with the rest of the settings. If you want, you can check here to activate it at boot time. Note: If you are using a WEP key in hexadecimal format (numbers and letters from A to F) make sure you proceed it with a 0x when prompted.

 Card: Broadcom Corporation BCM4310 UART (rev 01)
 Ndiswrapper version: 1.23 (need version ndiswrapper 1.31 on Mandriva 10.2 on HP Pavilion dv9001)
 Chipset name: Broadcom BCM4312
 PCIID: 14e4:4312
 Windows driver location: ftp://ftp.hp.com/pub/softpaq/sp33001-33500/sp33008.exe This file can be extracted with cabextract and contains both 32 bits and 64 bits files. (Try: ndiswrapper -i bcmwl5.inf)
 Using Gentoo AMD64 Kernel Version 2.6.17 on a HP Pavilion dv2000 / Mandriva 10.2 AMD64 Kernel 2.6.15 on HP Pavillion dv9001
 Other: For DV6000 (and maybe others) use ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34152.exe (resolves random oopses)
 Using ndiswrapper version 1.41 with ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34152.exe on DV 6000z on Ubuntu 2.6.15-28-k7 #1 SMP PREEMPT Thu Feb 1 16:36:09 UTC 2007 i686 GNU/Linux

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 Ndiswrapper version: 1.1-4
 Chipset name: Broadcom BCM4318
 PCIID: 02:03.0 (rev 02)
 Windows driver location: http://biginoz.free.fr/linux/bcmwl5a.inf. Also need .sys file http://biginoz.free.fr/linux/bcmwl5.sys
 Using Ubuntu 5.10 on Dell Inspiron 1300

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 Ndiswrapper version: 1.11
 Chipset name: Broadcom BCM4318
 PCIID: 30:02.0 (rev 02)
 Windows driver location: ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/winxp64bit/80211g.zip Driver: WL_Broadcom,XP64
 Using Fedora Core 5 x86_64 on HP Pavilion zv6000 with AMD64.
 Worked after adding "noapic nolapic acpi=off" to kernel command line obtained from
 http://www.linuxquestions.org/questions/showthread.php?p=2132310#post2132310

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 Ndiswrapper version: 1.21
 Chipset name: Broadcom BCM4318
 PCIID: 03:02.0 0280: 14e4:4318 (rev 02)
 Windows driver location (v6.00 rev. a): ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe This file can be extracted with cabextract and contains both 32 bits and 64 bits files. Also explanations are available here: ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.html
 Works with boot noapic nolapic
 You may need to blacklist the default bcm43xx kernel module by adding it to the listing in /etc/modprobe.d/blacklist
 Using Mandriva Cooker x86_64 on HP ZV 6000 Sempron 3200+  
 Tested using Sidux 2007-01 on Compaq V5105US

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 Ndiswrapper version: 1.11
 Chipset name: Broadcom BCM4318
 PCIID: 00:0b.0 (rev 02)
 Windows driver location: ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/winxp64bit/80211g.zip Driver: WL_Broadcom,XP64
 Other: Needs *.sys *.inf files in same directory but use BCMWL5A.INF for ndiswrapper driver install. Load ndiswrapper at boot up thanks to /etc/rc5.d file. Antho.martin@gmail.com for more informations or questions.
 Using Fedora Core 5 x86_64 on Acer Aspire 5002 WLMI with AMD Turion 64.

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 Ndiswrapper version: 1.22 and 1.23
 Chipset name: Broadcom BCM4318
 PCIID: 02:03.0 (rev 02)
 Windows driver location: http://biginoz.free.fr/linux/bcmwl5a.inf. Also need .sys file http://biginoz.free.fr/linux/bcmwl5.sys
 Using SuSE 10.1 on Dell Inspiron 1300

 Card: BT Voyager 1040
 Ndiswrapper version: 1.2
 Chipset name: Broadcom BCM4306KFB
 PCIID: 00:09.0 Class 0280: 14e4:4320 (rev 03)
 Windows driver location: Driver: ftp://ftp.support.acer-euro.com/notebook/aspire_1500/drivers/80211g.zip
 Other: Needs both *.inf files in same directory but use BCMWL5A.INF for ndiswrapper driver install.
 Using SuSe 10.0 with AMD Sempron 2200

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller in HP Pavilion zv6000 (zv6203) AMD Athlon 64 CPU with Suse 10.0 X86_64
 Broadcom BCM4318 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318
 Driver: bcmwl5.inf, BCMWL564.SYS, also had to use the 64 bit version from ftp://ftp.support.acer-euro.com/notebook/ferrari_4000/driver/winxp64bit/80211g.zip &ndash; Note: the Linuxant Driverloader drivers (64bit) will not work for this card. Only the Acer 64bit drivers have worked under this OS
 * Other: Using Ndiswrapper 1.5 and the above driver with no problems. Suse 10 requires some extra help though with this wlan card. In order to work with Suse 10 x86_64, install ndiswrapper and driver then run modprobe ndiswrapper. After that, use Yast to add new network card. Select Device Type = Wireless, Configuration Name = wlan0 (or wlanX where X is the next wireless card number), Hardware Configuration Name = bus-pci-0000:XX:XX.X (replace the X''s with the pci location of the device from the output of "lspci -v'') &ndash; for example, my lspci -v returned ":03:02.0'' before my BCM4318 card, therefore my Configuration Name is "pci-bus-0000:03:02.0'', Module Name = ndiswrapper, and lastly in Options, put irq=XX where XX is the IRQ number also returned in the output from lspci -v. Click Next and then enter the AP Name and key information if this applies to you. After you finish that and finish the configuration, restart and press F2 at the Suse 10 boot menu. VERY IMPORTANT** Add the boot option of "noapic'' (NOT "noacpi'') and continue to boot. This option is required for Suse 10 x86_64 to see and use the BCM4318 card. Hope this helps!

 Card: Network controller: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02) in HP COMPAQ V2415LA with Debian sid, ndiswrapper 1.5
 pciid: 14e4:4318
 Driver: bcmwl5.inf, BCMWL5.SYS, from
 ftp://ftp.hp.com/pub/softpaq/sp30001-30500/SP30379.exe
 dmesg shows:
 wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller in HP nx6125 Turion 64 CPU with Suse linux 10.0 X86_64 on a WPA network
 Broadcom BCM4318 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318
 Driver: bcmwl5.inf, BCMWL564.SYS, had to go for a 64 bit version from ftp://ftp.support.acer-euro.com/notebook/ferrari_4000/driver/winxp64bit/80211g.zip
 Other: Needed to download cvs version of ndsiwrapper 1.6rc1(the 1.6rc1 sources available sourceforge didn''t compile) to get ndiswrapper working with wpa_supplicant.

 Card: Hewlett-Packard Company BCM4318 AirForce One 54g 802.11g Wireless LAN Controller
 Ndiswrapper version: 1.34
 Chipset name: Broadcom BCM4318
 PCIID: bus-pci-0000:05:02.0
 Windows driver location: ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe 
 In my particular scenario, using SUSE 10.2, the wireless device was already detected which really threw me. To get ndiswrapper working, make sure GCC and the kernel source is installed. Do this by opening Yast, click on Software Management and search for each, click the check box to install and accept. It will most likely require you to insert the disk to install the libraries. Then open xTerminal and  cd to the directory in which ndiswrapper is present. Follow the directions that came with ndiswrapper. */ Important */ From here go into the network configuration, do these steps if the wireless card is already present. 1. Click on the device and click Edit. 2. Click Advanced and hardware details. 3. Change module to: ndiswrapper. After fulfilling these steps restart the computer and type noapic at boot options. If you need any help feel free to email me at compnet32@gmail.com Hope it all works!
 Using SUSE 10.2 x86_64 on Compaq Presario V2401CL 

 Card: Billion BIPAC-3010G
 Chipset: ISL 3880IK 
 usbid: 0cde:0006
 Driver: WlanUIG.inf and WlanUIG.sys, from supplied cd
 Other: SuSE 9.3 (kernel 2.6.??) - ndiswrapper 1.2
 Other2: Fedora Core 4 (kernel 2.6.11) - ndiswrapper 1.2

 Card: Broadcom BCM94306 802.11g built-in Compaq Presario 3160 laptop
 Chipset: Broadcom 94306
 pciid: 0000:02:02.0 (rev 03)
 Driver: Used wifi driver on Windows Drivers CD supplied with laptop
 Other: Suse 9.1 32 bit, NdisWrapper 0.8 compiled/installed from source. Used bcmwl5.inf/bcmwl5.sys On another Compaq Presario 3??? laptop with AthlonXP-M cpu, I had to use bcmwl5a.infAlso Suse 9.1 64 bit, NdisWrapper 1.0 compiled/installed from modified source. Used 64 bit netbc564.inf/BCMWL564.SYS driver.  On a Compaq Presario R3000Z, running in 64 bit mode, drivers won''t always work if you have more than 1GB RAM. It seems to be a problem on the Broadcom driver or hardware.  A*bad* workaround is to boot adding mem=1024M as a boot parameter (being able to use only 1G)

 Card: Broadcom BCM94306MP built-in HP Pavilion ze4560us laptop
 Chipset: Broadcom 94306
 pciid: 14e4:4320 (rev 02)
 Driver: Use driver for Dell Truemobile 1300
 Other: Gentoo 2.6.4-r1, NdisWrapper 0.8/0.9 manual compile/install (ebuild does not work). Works fine except dmesg reports "ndiswrapper (add_Driver:1539): Cannot add duplicate driver" Consistent 3.1MB/s thruput, peak at 3.7MB/s. No dropoff in thruput , no instability.

 Card: Broadcom BCM4306 802.11b/g Wireless LAN Controller Laptop: HP Pavilion ze4900
 Chipset: Broadcom 4306
 pciid: 14e4:4320 (rev 03)
 Driver: Broadcom WLAN Network Driver http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?dlc=en&lc=en&os=228&product=433741&lang=en&cc=us&softwareitem=ob-26984-1 or bcmwl5.sys on Application/Driver Recovery DVD provided with laptop
 Other: I installed this driver on Fedora Core 3 with the 4K stack (no problems thus far) and ndiswrapper-1.1. The installation worked exactly as the Installation notes says it should.

 Card: Broadcom BCM94306 802.11g built-in HP Pavilion dv1010ca laptop
 Chipset: Broadcom 94306
 pciid: 14e4:4320 (rev 03)
 Driver: Look here for for file SP28537.exe http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?product=434901&os=228&lang=en&cc=ca&lc=en&dlc=en&softwareitem=hb-22924-1 which can be extracted by running it with Wine despite errors reported.
 Other: Tested with Ubuntu Linux (Debian based) 2.6.8.1-3-686, NdisWrapper from CVS manual compile/install - had to use make before make install, otherwise got "ndis_exports.h missing" error when building. dmesg reports WEP, WPA with TKIP, WPA with AES/CCMP support. Works fine, tested at 11mbps with WEP. dmesg reports "driver bcmwl5 (Broadcom,06/26/2004, 3.70.17.0) added" .

 Card: Broadcom BCM4301 built-in Compaq nx9110 laptop
 Chipset: Broadcom 4301
 pciid: 14e4:4301 (rev 02)
 Driver: Downloaded Windows 2000 driver from Compaq site. FilenameSP28538.exe.
 Other: Debian with 2.6.8 kernel. NdisWrapper 0.10 built deb and installed. Use bcmwl5.inf.

 Card: Broadcom BCM4301 built-in HP Pavillion zv5142EA (zv5000 series)
 Chipset: Broadcom 4301
 pciid: 14e4:4301 (rev 02)
 Driver: Downloading latest XP driver for the zv5142EA will surely be ok - as of 2004-10, this is SP27952A. Use driver bcmwl5a.inf here!
 Other: SuSE 9.1 with 2.6.4.52-default kernel. NdisWrapper? installed via YaST.

 Card: Broadcom BCM4301 built-in HP Compaq nx9010 laptop
 Chipset: Broadcom 4301 802.11b (rev 02)
 pciid: 14e4:4301 (rev 02)
 Driver: bcmwl5.inf from the HP.com Windows XP update file SP28537.exe, using Ndiswrapper 1.1 and wpa_supplicant, everything including WPA-PSK works following installation instructions and using the WPA config file on the wiki.

 Card: Broadcom BCM4303 built-in HP Pavilion zv5265EA (zv5200 series)
 Chipset: Broadcom 4303
 pciid: 14e4:4301 (rev 02)
 Driver: Works with driver from "Driver Recovery CD" Disc 1 - SWSetup/WLAN/bcmwl5.inf / bcmwl5.sys

 Laptop: HP Pavillion zv5490EA Card: Broadcom BCM4306 built-in HP Pavilion zv5490EA
 Chipset: Broadcom BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 14e4:4320 (rev 03)
 Driver: Works with driver from "Application and Driver Recovery DVD" - SWSetup/WLAN/bcmwl5.inf / bcmwl5.sys

 Card: Broadcom BCM4306 on HP Pavilion zd8185ea laptop
 Chipset: Broadcom 4306
 pciid: 14e4:4320 (rev 03)
 Driver ndiswrapper-1.2-3mdk . Works with Broadcom Wireless LAN Driver Release Date: 2005-06-01, Version: 4.00 C from hp website. WPA has not been tested. iwconfig should display a Signal Strength between -15 dB and -90 dB. Issue found : nothing critical. Turning on or off the radio with the button has no effect on wlan (but has on bluetooth). You sometimes have to wait up to 30s after receiving the signal to get a MAC and IP address with some wireless receivers. Playing too much and too fast with rmmod and modprobe can hang the laptop. It looks like the integrated network card shouldn''t be in the same range than the wireless device (strange), but would require more testing.

 Card: Broadcom BCM4306 built-in HP compaq nx9020 laptop
 Chipset: Broadcom 4306
 pciid: 14e4:4320 (rev 03)
 Driver: ndiswrapper 1.1 @ Debian sarge. Download latest drivers from HP''s site (http://h18007.www1.hp.com/support/files/hpcpqnk/us/download/22237.html).  SP29361.exe worked for me (Broadcom,10/20/2004, 3.70.22.0). Extract with wine or Windows and use either bcmlw5.inf or bcmlw5a.inf, both seems to work. WPA should work also. If ndiswrapper reports only WEP as supported encryption modes, enable radio from wlan-button, remove ndiswrapper -module and reload it.

 Card: Broadcom BCM4306 built-in Compaq Pressario 2209CL laptop
 Chipset: Broadcom 4306
 pciid: 14e4:4320 (rev 03)
 Driver: ndiswrapper 1.1 @ Debian testing. Download latest drivers from Compaq''s site http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?dlc=en&lc=en&os=228&product=434909&lang=en&cc=us&softwareitem=ob-31557-1. SP30379.exe worked for me (Broadcom WLAN Network Adapters Driver,06-2005, 4.00 C). Extract with wine or Windows and use either bcmlw5.inf or bcmlw5a.inf, both seems to work. WPA should work also. If ndiswrapper reports only WEP as supported encryption modes, enable radio from wlan-button, remove ndiswrapper -module and reload it.

 Laptop: HP Pavillion zt3000 Card: Broadcom BCM4306 built-in HP Pavilion zt3000
 Chipset: Broadcom BCM4306 802.11b/g Wireless LAN Controller
 pciid: 14e4:4320 (rev 03)
 Driver: Works with driver from "Driver Recovery CD" Disc 1 - SWSetup/WLAN/bcmwl5.inf / bcmwl5.sys

 Card: Broadcom 802.11b Mini PCI wlan chipset built-in HP Pavilion zv5112EA
 Chipset: Broadcom Mini PCI wlan
 pciid: ??
 Driver: Works with drivers from "Driver Recovery CD" Disc
 Other: Fedora Core 1. NdisWrapper? 0.8. The ndiswrapper site had help that helped me half way through. I used Red Hat tool neat to get it working properly. Gives some errors at start up, but it works.

 Card: Broadcom BCM4318 AirForce One 54g in HP Compaq nx6125 AMD Turion 64 notebook
 Chipset: Broadcom BCM4318 802.11g Wireless LAN Controller (rev 02)
 PCIID: 14e4:4318 (rev 02)
 Driver: 32-bit driver version 3.100.64.0 from HP support page (ftp://ftp.compaq.com/pub/softpaq/sp30501-31000/SP30676.exe download SP30676.exe)
 Other: 32-bit Gentoo Linux system with ndiswrapper 1.5 and Linux Kernel 2.6.14.2. I used the files bcmwl5.inf and bcmwl5.sys.

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g (rev 02) 000:06:02.0 0280: (rev 02)  ON  Compaq V5105US (AMD 3300+) Kubuntu 6.06 Dapper
 Chipset: BCM4318
 pciid: 14e4:4318 
 Driver: bcmwl5.inf, BCMWL5.SYS, ftp://ftp.hp.com/pub/softpaq/sp30001-30500/SP30379.exe
 You may want to tray 64bit drivers if you have a 64bit processor. Note: Most important thing.  After successfully installing and doing a "modprobe ndiswrapper".  I had to physically press the wireless network button-light, after that things worked perfectly!

 Card: Broadcom BCM94318 built-in on Compaq Presario V2311US (V2000Z) Turion64
 Chipset: Broadcom BCM4318 802.11b/g Wireless LAN Controller
 pciid: 14e4:4318 (rev 02)
 Driver: Works in 64-bit mode with bcmwl5.inf (with BCMWL564.SYS) in WL_T60H906(8.0.10.0,XP64_logo) obtained from Acer at ftp://ftp.support.acer-euro.com/notebook/ferrari_4000/driver/winxp64bit/80211g.zip
 Other: Fedora Core 3 x86_64 on kernel 2.6.12-1.1372_FC3 and ndiswrapper-1.2-0.lvn.3.3.rpm.  Please note, does NOT work with netbc564.inf from Linuxant web site as of 8/22/05, so use the drivers from the Acer website above.  Official product webpage: http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions/BCM94318

 Card: Broadcom BCM4318 installed in a Gateway 7510GX
 Chipset: Broadcom BCM4318 802.11b/g Wireless LAN Controller
 pciid: 14e4:4318 (rev 02)
 Driver: 64-bit Driver from http://csd.acer.com.tw/SI/Download2.nsf/1815c7c6f8aff65d48256bdd0035cffd/eab20c4cf34cbba94825702e0016527b/$FILE/80211g.rar
 Other: This is the only driver I could get to work with the AMD Athlon 64 mobile processor that comes with the Gateway 7510GX using Suse 9.3 Pro. Unpack the .rar, and a ndiswrapper -i bcmwl5.inf and you are set to go!

 Card: Broadcom BCM4320 (802.11b/g) (Sweex) built-in Dell i810 (Latitude) laptop
 Chipset: Broadcom 4320
 pciid: 14e4:4320 (rev 03)
 Driver: Downloaded driver from sweex site (www.sweex.com).
 Other: Slackware 10.1 with 2.6.10 kernel.  NdisWrapper 1.0, followed install guide on ndiswrapper wiki site. Use bcmwl5a.inf. WEP works. &lt;i>-Ryan tH&lt;/i>

 Card: Broadcom 802.11a/b/g Mini PCI wlan chipset built-in Acer Aspire 1501Lmi and similar (amd64)
 Chipset: Broadcom Mini PCI wlan BCM4306
 pciid: 14e4:4320 (rev 03)
 Driver: Works with driver from http://planetamd64.com/dload.php?action=file&file_id=261, http://ubuntuforums.org/attachment.php?attachmentid=186 or Windows x64 build1289
 Other: Gentoo 2004.3, linux 2.6.10, ndiswrapper 1.0-rc3 has the needed changes to run on amd64 too, the 4k-stacksize warning is useless since 64bit kernel has no option to change this but the windows-driver doesn''t need a >4k-stack. WPA needs some patching since else it segfaults on startup, qualitiy and transferrates should get even better when the windows-driver gets better. For some information on how to use WPA with this version look on the mailinglist, Karl Vogel has submitted a patch, latest cvs of wpa-supplicant should contain this already. WEP etc. work without problems

 Card: Broadcom 802.11a/b/g Mini PCI wlan chipset hand installed in ASUS M6000BNe laptop
 Chipset: Broadcom Mini PCI wlan BCM4306
 pciid: 14e4:4320 (rev 03)
 Driver: Works with driver from ASUS website (see elsewhere on this page) with changes to ndiswrapper conf file.
 Other: Using kernel 2.6.10, ndiswrapper 0.12+1.0rc2-1 Debian package.  ndiswrapper incorrectly sets RadioState to 1, when 0 means "enable" and 1 means "disable". The card did not use the default 14E4:4320.conf file; I had to change the ones with longer names. I also set the country code, although this may not matter.  For explanations, see the Win98 .inf file, which is plain text and contains brief descriptions of the options. WEP etc.  not yet tested.

 Card: BAFO BF-800 USB to DB-25 serial port adapter
 Chipset: PL2303
 usbid: 067b:2303
 Driver: ser2pl - available from http://www.bafo.com/bafo/prodrivers.asp (drill down to BF-800)

 Card: Broadcom Corporation Dell Wireless 1470 DualBand WLAN (rev 02) in HP Compaq nx6125 with AMD Turion 64
 pciid: 14e4:4319 (rev 02)
 Driver: 64bit: https://www.synapsenow.com/synapse/data/7117/documents/WLAN_Broadcom_BG(3.100.64.0_logo).zip
 Other: Run ln -s /etc/ndiswrapper/bcmwl5/14E4:4318.5.conf /etc/ndiswrapper/bcmwl5/14E4:4319.5.conf after installing. Fedora Core 5 x86_64, with ndiswrapper 1.10-2.lvn5 from livna. WPA works with wpa_supplicant 0.4.8-5 (distributed with FC5)

 Card: Broadcom Hewlett-Packard A/B/G 4319 (rev 02) mini pci
 Chipset: BCM4319
 pciid: 14e4:4319
 Driver: Windows 64 bit: http://www.uptimecomputing.com/ndiswrapper/bcm4319.tar.bz2
 Other: Be sure to create the symlink mentioned in the README file for 64 bit.
 Other: This driver works with the broadcom A/B/G cards that HP uses.
 Driver: Windows 32 bit: http://www.uptimecomputing.com/ndiswrapper/bcm4319-i586.tar.bz2
 Other: No need for symlink with 32 bit version.

 Card:  Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 Driver: used the driver from Dell''s website (R115321)
 Other: I was banging my head against the wall until I blacklisted the bcm43xx kernel module (Fedora Core 5) - then things worked like a charm
 Other: this is on a Dell Inspiron 1300

 Card:  Broadcom Corporation BCM4318 AirForce One 54g 802.11b/g Wireless LAN Controller (rev 02)
 Driver: used the driver from this list
 Other: I was banging my laptop against the floor until I set my wlan0 to Master in Operating Mode  (Wireless Device Setting in Yast2) (Suse 10.1 kernel 2.6.16-13-4-smp) - then world become brighter.
 Other: this is on a Acer Aspire 3000 Series (Aspire 3003 NLCI)

 Card: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 Ndiswrapper version: 1.23-1 from Debian etch repository
 Chipset name: Broadcom BCM4318
 PCIID: 02:05.0 Class 0280: 14e4:4318 (rev 02)
 Windows driver location: ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe; I extract this file with wine and contains both 32 bits and 64 bits files; I used bcmwl5.inf, bcmwl564.sys, bcm43xx64.cat
 Works with noapic nolapic kernel parameters and acer_acpi-0.3 drv (other kernel param.s used: someone says kernel like mine dont needs ec_burst=1 param. 2 get the battery to display information; pci=assign-busses used 4 card reader: dont works yet because of Texas Instr. chip)
 Using Debian etch 2.6.16-2-amd64-k8 on Acer Aspire 5022WLMi.

 Card:Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card rev 01
 PCIID: 03:00.0 0280 14e:4311 rev 01
 PC: HP pavilion dv6000 series "DV6105US'' 
 OS: Slackware 11.0
 Driver Used:  Win32 Driver from HP
 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-45290-1&lc=en&cc=sg&dlc=en&product=3245619&os=228&lang=en HP Driver
 Other: Kernel version 2.6.19 Slackware 11.0 Ndis 1.33 newest windows driver, absolutely no issues!

 Card:Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card rev 02
 PCIID: 03:00.0 0280: 14e4:4311 (rev 02)
 PC: HP pavilion tx1000 series "GD617AV''
 OS: Fedora 7
 Driver Used:  Win32 Driver from HP
 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-45290-1&lc=en&cc=sg&dlc=en&product=3245619&os=228&lang=en HP Driver
 Other: Kernel version 2.6.21-1.3228.fc7.x86_64 Ndis 1.47

 Card: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)
 PCIID: 0000:02:03.0 0280: 14e4:4320 (rev 02)
 PC: Dell Latitude D600 laptop
 OS: Ubuntu 6.06LTS (Dapper) Kernel: 2.6.15-27-386
 Driver used: R115321.EXE from from support.dell.com
 Other: Dell TrueMobile 1300 MPCI Card, driver released 06/23/2006, for USA only, not USB.  Had tried other drivers from list w/o any success. I haven''t been using this one very long but so far so good, looks like I can put CAT5 leash away.

 Card: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
 Chipset Name:  BCM94318MPG
 PC:  Emachines W4630 (Amd Turion 64)
 PCIID: 03:09.0 0280: 14e4:4318 (rev 02)
 ndiswrapper version:  1.47
 OS:  Ubuntu 7.04 - Linux 2.6.20-16-generic #2 SMP Thu Jun 7 19:00:28 UTC 2007 x86_64 GNU/Linux
 driver:  BCMWL564.SYS
 driver url:  ftp://ftp.support.acer-euro.com/notebook/ferrari_4000/driver/winxp64bit/80211g.zip

 Card: Broadcom BCM4318 AirForce One 54g in HP Compaq nx6125 AMD Turion 64 notebook
 Chipset: Broadcom BCM4318 802.11g Wireless LAN Controller (rev 02)
 PCIID: 14e4:4318 (rev 02)
 Driver: 64-bit driver extracted with cabextract from ftp://ftp.compaq.com/pub/softpaq/sp33001-33500/sp33008.exe
 System: 64-bit Arch Linux (running 2.6.22-ARCH #1 SMP PREEMPT kernel) with ndiswrapper 1.47

 Card: Buffalo/Melco AirStation g54 (WLI-CB-G54A)
 Chipset: Broadcom BCM94306 (rev 03)
 pciid: 14e4:4320
 Driver: ftp://ftp.dell.com/network/R74092us.EXE (use unzip to extract)
 Other: (use either .inf in AR directory) Works with WEP and WPA with either CCMP/AES or TKIP ciphers.

 Card: Buffalo AirStation g54 (WLI-CB-G54L)
 Chipset: Texas Instruments ACX 111
 pciid: 104c:9066
 Driver: Works with drivers in the CBG54L/WinXP directory on the 3.70.3 Buffalo CD.
 Other: Tested on Whitebox Enterprise Linux 3 with stock 2.6.5 kernel and ndiswrapper 0.11 26Jan05:: Also Tested on Ubunta Linux 5 (Debian Based) Kernal Version: 2.6.8.1-3-386 Ndiswrapper Version: 0.12 WinXp
 Driver Downloaded from Buffalo website I would be glad to help if you are using the same card and need support calvin@jinux Dot no-ip Dot org (plz convert the Dot to ".") 16 Feb 05: The driver link on the Buffalo website is here: http://www.buffalotech.com/downloads/CBG54L.zip 23 March 05: Works with Fedora Core 3 running the modified kernel at http://www.linuxant.com/driverloader/wlan/full/downloads-fc3-kernel-i686.php, which has the 4k stack size disabled. Without that, I got a segfault when turning on WEP. Using ndiswrapper v1.1 and the Windows XP drivers from the Buffalo website.

 Card: Buffalo Airstation 125 High Speed G54S (WLI-CB-G54S  Cardbus)
 Chipset: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 PCIID:   14e4:4318
 Driver:  netg54s.inf  bcmwl5.sys (Win2000 driver from the CD packaged with the card)
 Notes:   This cardbus device works on Kubuntu 6.06 with Ndiswrapper 1.8
 Notes:   Blacklist the bcm43xx driver that is loaded by the kernel
 Notes:   After some playing with Kwlan, I got it to work as wlan0.  Only works at 54mbs, but good signal and good connection.

 Card: Buffalo AirStation G54 (WLI2-CB-G54L)
 Vendor: Linksys, A Division of Cisco Systems
 Description:  AirConn INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01) PCI ID: 17FE:2220
 Driver: ftp://ftp.support.acer-euro.com/notebook/TravelMate_4000_4500/driver/a802.zip, Kernel:2.6.11-6mdk, ndiswrapper: 1.1
 Notes: Despite the driver coming from the acer website it appears this is a generic driver for this chipset. The drivers from the CD that came with the card would not work, nor would those downloaded from the Buffalo website.
 Notes: On Ubuntu Breezy Badger iwconfig doesn''t work some reason manage to get to set the key for the access point. Due to that the connection won''t work, even though WPA isn''t used. More information in http://www.wi-fitechnology.com/viewthread25.html a forum post (note that the file to edit is /etc/network/interfaces on Ubuntu).
 Notes: On Ubuntu 6.06 LTS (Dapper Drake) the above problem seems to have been resolved; however, for some reason iwconfig releases the settings made to it (essid & key, or just essid or just key), perhaps if the wireless connection goes down for extended periods of time.

 Card: Buffalo Tech WLI2-PCI-G54
 Chipset: Buffalo BCM94306 (rev 03)
 pciid: 14e4:4320
 Driver: ftp://ftp.dell.com/network/R81433.EXE
 Other: Use the .inf in the AR directory. Works with ndiswrappers 0.11 and RHEL 3.
 Other: In order to install the drivers you need to first blacklist the bcm43xx driver with the command: echo "blacklist bcm43xx'' | sudo tee -a /etc/modprobe.d/blacklist . Then install the bcmwl5.inf file. Check this guide for more info: http://ubuntuforums.org/showthread.php?p=1699599
 Other: Ubuntu 5.04 (Hoary), ndiswrapper 1.0rc2, dell drivers from file R81433.EXE.  I used the bcmwl5, not bcmwl5a drivers in the AR directory, not sure of the difference.  No luck until I editted *every* .conf file in /etc/ndiswrapper/bcmwl5/, replacing RadioState|1 with RadioState|0.  Now it appears to be working perfectly on an open network.

 Card: Buffalo Tech WLI2-USB2-G54 (USB2 device), 54mbps
 Chipset: Prism54
 usbid: 0411:0050
 Driver: Driver for WLI2-USB2-G54 from http://www.buffalotech.com/support/downloads.php has some issues.  Instead, use the driver for Linksys WUSB54G, which works fine.
 Other: Works with WEP, WPA using both AES and TKIP ciphers.
 Other: I just tested this device with WUSB54Gv1 and v2 drivers from Linksys and ndiswrapper claims that the hardware isn''t installed. The driver from Buffalo causes a kernel panic. YMMV.  8 Nov 2004
 Other:Had the same problem with version 0.10  but, Works with ndiswrapper v0.11 (both drivers ), i''m using kernel 2.6.7 and Slackware 10, Buffalo one has caused a kernel panic under heavy loads. CH - 22-Nov-2004

 Card: Buffalo Tech Turbo G AirStation WLI-CB-G54HP , 54mbps PCMCIA
 Chipset: Broadcom 4318
 Driver:  The drivers included on the Buffalo installation CD did not work.  Also tried all available drivers from Buffalo support site.  None worked.  Instead use the generic Broadcom driver bcmwl5.inf & bcmwl5.sys obtained from HP/Compaq support page ftp://ftp.compaq.com/pub/softpaq/sp30501-31000/SP30676.exe.  Happy to say it works great with no known issues. 
 Other: I''m using static IP, I have not tried DHCP.
 Other: Installed easily with no special configuration editing.

 Card: Buffalo 802.11n USB Network Adapter 
 Chipset: Marvell 88W8360 USB / TopDog / 8360
 usbid: 0411:00CA
 Driver: Driver available on accompanying CD or web
 Other: Pretty sure it is this model "Buffalo AirStation Nfiniti Wireless-N WLI-U2-G300N - Network adapter - Hi-Speed USB"
 Other: NOT TESTED! listed here for reference. Reported success on Marvell 8360 entry.

 Card: Cable & Wireless 802.11g Wireless LAN Mini USB Adapter
 Chipset: ZyDAS ZD1211
 pciid: 0ace:1211
 Driver: ZD1211U.inf from http://lgsagem.free.fr/Telechargement/Driver%20WIFI/Windows/XG_760A_ZD1211USB_Install_4_13_0_0_ALL.zip
 Other: Works fine for me. The only problem is that the driver is in an installation utility so I had to use WINE to run the install so I could get hold of the .inf.

 Card: CC&C Technologies WL-1102 Wireless LAN 11b MiniPCI Adapter
 Chipset:  Realtek RTL8180 (rev 20)
 pciid: 10ec:8081
 Driver: NET8081.INF from Realtek v1.54
 Other: Slackware 10.1 Kernel 2.6.12 ndiswrapper 1.2
 Other: The only driverversion which works with this card is v1.54 from 2003! Earlier and later version do not power up the card. One can find this driver by searching the web for the following filenames: Realtek-8180-Driver5.154.904.2003.zip or winxp-8180(154).zip

 Card: Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter
 Chipset:  Broadcom Corporation BCM94306 802.11g (rev 03)
 pciid: 14e4:4320
 Driver: lsbcmnds.inf from windows driver CD
 Other: ndiswrapper 0.10 Suse 9.1 Kernel 2.6.5 Both updated via Yast
 Other: it works well if it has found a network. I cannot install it in Yast or kwifimanager, only with iwconfig.  iwconfig wlan0 essid "MyNetwork" works only in a console it does not in a skript, the quotation marks are importent

 Card: CNet CWC-854 Wireless-G PCMCIA Adapter
 Chipset: RaLink RT2500
 pciid: 1814:0201 (rev 01)
 Driver: ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: NdisWrapper 0.10 and Slackware 10.2 with custom 2.6.14 kernel
 Other: Seems to work better in linux than in windows

 Card: CNet CWP-854 Wireless-G PCI Adapter
 Chipset: RT2500
 pciid: 1814:0201 (rev 01)
 Driver: Windows 2000 drivers from installation CD, driver version 11/27/2003, 2.01.00.0000
 Other: using NdisWrapper? version 1.0rc2, Debian unstable, Kernel 2.6.10
 Other: I just tested this device with ndiswrapper and works great

 Card: CNet CWD-854 Wireless-G USB Dongle
 Chipset: RT2570
 usbid: 148f:2570
 Driver: Windows 2000 drivers from installation CD, cd version 1.09, file rt2500usb.inf
 Other: using NdisWrapper-utils Ubuntu package 0.12+1.0rc2-1, Kernel 2.6.10
 Other: Needed to " modprobe &ndash;remove ehci-hcd " to make it work.
 Other: Windows 2000 drivers from v1.12 CD did not work (kernel Oops on shutdown). 

 Laptop: Compaq Presario V5204NR
 Card: Broadcom Corporation 802.11b/g controller
 PCIid: 14E4:4311
 Subsystem: 103C:1363
 Driver: Broadcom Driver (provided with the laptop) bcmwl5.inf; matches the official Broadcom download
 Distribution: Gentoo Linux 2006.1, emerge system dated 20061024
 Ndiswrapper vesion: 1.27
 Other: Kernel 2.6.17-r8 (2.6.17.10) patched by the Gentoo folks
 Other: Didn''t work on Slackware Linux 11 with Kernel 2.6.18 because there are only 16 IRQs available here.
 Other: The card setup needs IRQ 18; then the gentoo patched kernel is necessary.
 Other: More info http://facorread.150m.com/gento.html here

 Laptop: Compaq Presario V6133CL
 Card: Broadcom Corporation 802.11b/g controller
 PCIid: 14E4:4311
 Subsystem: 103C:1363
 Driver: Downloaded from HP ftp://ftp.hp.com/pub/softpaq/sp33001-33500/sp33008.exe as outlined in the step-by-step tutorial referenced below. Did not use the driver that HP provides for this particular model.
 Distribution: Ubuntu Dapper Drake 6.06.1 LTS (32-bit version)
 Ndiswrapper vesion: 1.37
 Other: Kernel 2.6.15-28-k7 Ubuntu flavor (the standard linux-image-2.6.15-28-k7 pckg version is 2.6.15-28.51)
 Other: See very good step-by-step on the https://help.ubuntu.com/community/WifiDocs/Device/Broadcom_BCM4311_rev_01_%28ndiswrapper%29 Ubuntu wiki
 Other: Installed on 25-Feb-2007

 Card: Conceptronic C54RC Wireless 54Mbps PC Card (PCMCIA)
 Chipset: RT2500
 pciid: 1814:0201 (rev 01)
 Driver: Windows XP drivers from installation CD, driver version 2.02.05.0000.
 Other: Using NdisWrapper? 0.12rc-1, Debian unstable, Kernel 2.6.8.1.
 Other: The latest RaLink Linux driver (version 1.4.3.0), works ok, but quickly the system hangs.
 Other: ndiswrapper + wpa_supplicant, Ubuntu 5.10. Win XP driver, driver (Conceptronic,12/15/2004, 3.00.01.0000)

 Card: Conceptronic C54RU (USB 2.0 Adaptor 802.11g 54Mbps)
 Chipset: RT2500
 usbid: 14b2:3c02
 Driver: Driver/CRTUSB.inf (v1.02.00.0000) on installation CD or in www.conceptronic.net.Latest driver (v3.0) from www.conceptronic.net doesn''t work, causes kernel panics. Version 2.00.01 seems to work pretty well also.
 Other: Works in Debian Sarge with precompiled 2.6.8, 2.6.9, 2.6.10 kernels. Sometimes can hangup the PC. 

 Card: Conceptronic 54Mbps Wireless Network Card (PCI)
 Chipset: RT2500
 pciid: 0000:00:0a.0
 Driver: Win2K driver from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Debian Sarge, kernel 2.6.9, NdisWrapper? 0.11. The card is recognized as RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01). The RaLink RT2500 Linux driver (1.4.3.0) would make the system hang when bringing up the device (ifconfig ra0 up). None of the available driver fixes would solve the problem. NdisWrapper? made it work instantly.

 Card: COREGA CG-WLUSB2GTST (USB)
 Chipset: unknown
 pciid: 0000:00:0a.0
 Driver: Windows XP drivers from installation CD
 Other: Using NdisWrapper 1.0rc1, Slackware 10.0, Kernel 2.6.9 and 2.6.10.
 Other: the driver works correctly but if you try to remove the module, the system crash.

 Card: COREGA CG-WLUSBSTICK11V3 (USB)
 Chipset: SiS162u
 usbid: 1259:0162
 Driver: Windows XP drivers (v1.05) from SiS-Homepage http://www.sis.com/download/ SiS Download Center
 Other: Using NdisWrapper 1.37, Kubuntu 7.04 (Feisty Fawn), precompiled Kernel 2.6.20 - The driver works perfectly with knetworkmanager, WEP and WPA-PSK (TKIP)

 Card: D-Link DWA-130 - Wireless N USB Adapter (802.11n draft)
 Chipset: Marvell 88W8360 USB / TopDog / 8360
 usbid: 07d1:3b11
 Driver: Driver available on accompanying CD or web
 Other: NOT TESTED! listed here for reference. Reported success on Marvell 8360 entry.

 Card: D-Link DWA-142 - RangeBooster N USB Adapter (802.11n draft)
 Chipset: Marvell 88W8360 USB / TopDog / 8360
 usbid: 07d1:3b10
 Driver: Driver available on accompanying CD or web
 Other: NOT TESTED! listed here for reference. Reported success on Marvell 8360 entry.

 Card: D-Link Rangebooster N Desktop Adapter DWA-542 
 Chipset: Atheros unknown device 0023 (rev 01) PCI
 pciid: 168c:0023
 Driver: net5416; Driver available on accompanying CD
 Other: Installed on Xandros Home Desktop 4 Premium, with WPA.

 Card: D-Link DWL-G120 REV B1
 Chipset: Prism GT USB
 usbid: 2001:3701
 Driver: Driver available online . Driver version 04/2004, 1.00.15 (branded as a Conexant driver; D-Link''s drivers are older and less stable).
 Other: Works with WEP. Linux 2.6.10 ndiswrapper-1.5 has made this card extremely stable.
 Other: I had major stability problems with all drivers available on the US D-Link site. The drivers available there are "10/04/2003, 0.10.0.2" (labeled as v1.10) and "11/11/2003, 1.00.5.0" (labeled as v1.12). I discovered that there are several other drivers available on D-Link''s other regional sites, with conflicting version labels. I located the "04/06/2004, 1.00.15.0" driver on the Australian site labeled as v2.00. (The driver labeled v1.15 there was actually the 1.00.5.0 driver). The most recent driver that I could find was on the Taiwan site, which is "08/05/2004, 3.00.22.0" and labeled as v3.00 for rev C1 hardware. The 3.00.22.0 driver seems to be backward compatible with my rev B1 hardware and is working ok, but I have not been using it long enough yet to determine how stable it is.

 Card: D-Link DWL-G120 REV B2
 Chipset: Prism GT USB
 usbid: 2001:3701
 Driver: Driver available on accompanying CD (CD Ver 2.00) and in www.dlink.com. Driver version 11/11/2003, 1.00.5.0.
 Other: Works with WEP. Linux 2.6.7 ndiswrapper-0.11.  Drivers in CD are in .cab format, so i extracted requiered files (.inf, .sys, etc) from installed drivers of win 98, and then i pasted them on /etc/ndiswrapper/prisma02 folder.

 Card: D-Link DWL-G120 REV C1
 Chipset: iProduct says Cohiba 3887 rev0 USB
 usbid: 2001:3705
 Driver: Driver available on accompanying CD (CD Ver 3.00) Driver version 08/05/2005, 3.00.22.0.
 Other: Linux 2.6.14 ndiswrapper-0.18.

 Card: D-Link DWL-G122 (USB2 Dongle; would be helpful to specify the revision of the device the comments apply to: e.g., rev. A2 (see next card item) is Prism-based and quite different from some other revisions)
 Chipset: Ralink RT2500USB
 usbid: 2001:3C00
 Driver: http://www.ralinktech.com/ralink/Home/Support/Linux.html Native Linux-usb-driver as of 2005-08-19. RT2500 works OK for USB, tried in Fedora 4, worked like a charm.  (Ivo van Doorn (aka IvD) should be working on the RT2500USB which is needed.  http://rt2x00.serialmonkey.com/wiki/index.php/Developers is the place to look)
 Driver: 03/11/2004 1.00.13.0 on the CD (also latest found on dlink''s ftp site) works with ndiswrapper-0.12. (No idea what revision the dongle is.)
 Other: Works with WEP. Linux 2.6.7 and 2.6.9 with ndiswrapper-0.11. Woks with WPA-PSK using wpasupplicant (see the WPA Wiki).
 Driver: 07/15/2004 1.02.00.0000 on the www.dlink.de website works with ndiswrapper-1.1. P/N EDWLG122..B1, FCC ID:KA2DWLG122B1
 Driver: 04/01/2004 1.00.00.0000 from the CD works with ndiswrapper-1.1 The older(?) driver from binbash.de made problems after insmodding ndiswrapper in the kernel (see below). I am running Gentoo Linux with kernel 2.6.11-r6. The driver works with WPA-PKS (TKIP)
 Other: Using kernel 2.6.10-1.770_14.rhfc3.at, can hang initial modprobe if the dongle is plugged in, unplug it to get past problem. This version of the dongle is rt2500 based and NOT prism based (USA dlink site has wrong drivers!)

 Card: D-Link DWL-G122 rev. A2 (USB)
 Chipset: Conexant GW3887 (Prism)
 usbid: 2001:3704
 Label: P/N: BWLG122NA.A2, FCC ID:RRK2004030017-1
 Native linux driver: http://jbnote.free.fr/prism54usb/ "prism54usb" for 2.6 kernels (as of 2005-Jul-14). I have not tried it.
 Driver: 08/05/2004, 3.00.22.0 on the CD (Drivers/PRISMA02.INF; I used it with Drivers/WinXP/PRISMA02.sys, inside, you can find the following: 1-Jul-2004 2.5.12.0), works with ndiswrapper-1.1, kernel 2.4.26 from ALTLinux (std-up-2.4.26-alt12). 19 Jan. 2007: NDIS driver v3.00.21.0 on the CD and v3.00.22.0 from D-Link website, works with ndiswrapper-1.34, kernel 2.6.17 from Kubuntu 6.10.

 Card: D-Link DWL-G122 rev. B1 (USB)
 Chipset: Ralink 2500
 usbid: 2001:3c00
 Label: P/N: EDWLG122..B1  FCC ID:KA2DWLG122B1
 Native linux driver: Download from http://www.ralinktech.com/supp-1.htm Ralink. Tested with Fedora Core 4, kernel 2.6.13-1.1526_FC4.
 Driver: Latest WinXP driver downloaded from http://support.dlink.com/products/view.asp?productid=DWL%2DG122%5FrevB#.

 Card: D-Link DWL-G122 rev. C1 (USB)
 Chipset: Ralink RT73 (RT2571W)
 usbid: 07d1:3c03
 Label: P/N: EDWLG122..C1G  FCC ID:KA2DWLG122C1
 Driver: DR71WU.INF and DR71WU.SYS from the CD
 Native linux driver: Download from http://www.ralinktech.com/supp-1.htm Ralink. Tested with Fedora Core 4, kernel 2.6.11-1.1369_FC4 but need to edit a header file http://61.222.76.235/phpbb2/viewtopic.php?p=8430&sid=0fa796e956a79c1cfb3f4a33769c0547#8430.

 Card: D-Link DWL-G122 rev. D1 (USB)
 Driver: WinXP driver coming from the CD.
 Other: Working great on Debian. Using Aptitude to instaill the ndiswrapper  and start working immediately with kenerl 2.6.15.3. But after later upgraded to kernel 2.6.17.2, everything was fine until modprobe ndiswrapper with an error message "Module ndiswrapper not found.". Then download the tar file from sourceforge.net and follow the instructions here. The adaptor works again. 

 Card: D-Link DWL-G132 Airplus XtremeG (word)
 Chipset: Atheros? double... H/W ver.:A2 F/W ver.:1.02
 Other: needs both athfmwdl.inf and NETA5AGU.inf to run.
 Since november 2006, an updated driver is available from http://support.dlink.com/products/view.asp?productid=DWL-G132.  With these file, only neta5agu.inf is needed.  You need to use "ndiswrapper -a'' to specify the device id.

 Card: D-Link DWL-G132 Airplus XtremeG rev. A2 (USB)
 Chipset: Atheros
 usbid: 2001:3a03
 Driver:  neta5agu.inf 1.01.41 from D-Link''s site.
 Other:  Working w/ ndiswrapper-1.6rc1.  Full step-by-step posted in forum  http://sourceforge.net/forum/forum.php?thread_id=1384037&forum_id=323167.
 Other: Install both neta5agu and athfmwdl drivers.

 Card: D-Link DWL-G510
 Chipset: Marvell W8300
 pciid: 11ab:1fa6
 Driver: http://www.asus.com.tw/support/download/item.aspx?ModelName=WL-138G
 Driver: The asus driver hasn''t worked for me. Instead, I used the WinXP driver on the CD. Its available at ftp://ftp.dlink.com/Wireless/dwlg510/Drivers/dwlg510_driver_100.zip
 Other: Works with WEP and WPA with TKIP cipher. May need iwpriv wlan0 ndis_reset when changing essid.
 Other: Dlink driver has worked fairly stable on ndiswrapper 1.2 but is rock solid on ndiswrapper 1.5, at least for me. This was tested on Arch Linux, kernel 2.6.11 up to 2.6.14, SMP, PREEMPT, Pentium3, default stack settings. ndiswrapper 1.4 OOPses and locks hard, unstable, even with uniprocessor kernel. Only WEP was tested.
 Other: I use this card under ndiswrapper 1.2 on a gentoo 2.6.12 kernel without problem. See http://ndiswrapper.sourceforge.net/forums/viewtopic.php?t=482&highlight=link this thread. One thing: if the network goes down, rmmod ndiswrapper FAST and reinsert it to prevent a kernel panic. Only tested with 1.2.

 Card: D-Link DWL-G510 (Rev B)
 Chipset: Atheros
 pciid: 168c:001a
 Driver: Version 1.0, Provided on CD.  Version 2.11 from dlink.com also works.
 Other: only WEP tested, works fine on 2.6.9 and 2.4.27.  The short-named .conf file symlink was pointing to the wrong long-named .conf file - fixed manually.

 Card: D-Link DWL-G650M
 Chipset: Atheros
 Driver: No madwifi support yet. Use ndiswrapper and net5513.inf found on driver CD.

 Card: D-Link DWL-A520 (rev 01)
 Chipset: Atheros AR5000
 pciid: 168c:0007 (rev 01)
 Driver: Version 041102F for Windows XP : ftp://ftp.dlink.com/Wireless/dwla520/Driver/dwla520_driver_041102F.exe
 Other: Gentoo Base System version 1.6.12 | Kernel: 2.6.11-gentoo-r9 | Ndiswrapper 1.1-r1 | WEP and nonWEP tested OK

 Card: D-Link DWL-520 (Rev C1)
 Chipset: ADMTek 8211 (rev 11?)
 pciid: 
 Driver: http://support.dlink.com/products/view.asp?productid=DWL%2D520C1
 Other: Tested successfully with WEP on Fedora Core 4 using kernel 2.6.14-1.1656_FC4.

 Card: D-Link DWL-520 (Rev D1)
 Chipset: Realtek RTL8180 (rev 20)
 pciid: 10ec:8180
 Driver: ftp://202.65.194.18/cn/wlan/rtl8180l/ndis5x-8180(173).zip
 Driver: http://ultimate.kicks-ass.net/drivers/ndiswrapper/ndis5x-8180(173).zip
 Other: AP isnt found automagically but iwlist wlan0 scan shows AP''s.  WEP untested. Debian sarge. kernel-2.6.8-2.  ndiswrapper-1.0. WEP tested on Gentoo ~x86m kernel 2.6.12-rc2 ndiswrapper-1.1 works ok.

 Card: D-Link AirPlus ("Xtreme G") DWL-G520 Wireless PCI Adapter (H/W Ver. B2)
 Chipset: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 pciid: 168c:0013
 Driver: ftp://ftp.dlink.it/pub/Wireless%20Extreme%20G/DWL-G520_(108Mbps)/Driver/4.30/D-Link_AirPlus_XtremeG_Utility_(V4.3_Build50406)_G520_WPA2_ww.zip
 Other: Works OK with ndiswrapper 1.8 on Ubuntu Dapper Beta with NetworkManager 0.6.2.
 Other: No signal strength indication. WPA2PSK encryption working.

 Card: D-Link AirPlus ("Xtreme G") DWL-G520 Wireless PCI Adapter (rev. B)
 Chipset: Atheros Communications, Inc. "5212" (don''t know how to find anything more specific?)
 pciid: 168c:0013 (rev 01)
 Driver: Tested drivers up to 3.17 - all problematic
 Other: This is an American DWL-G520 - distinct from the G520+ distributed outside the states.
 Other: Always disconnects after a few hours (days at most). Connection cannot be restarted without a reboot. Note, same failure occurs with Driverloader; Linuxant unable/unwilling to fix (2/10/05).

 Card: D-Link DWL-G520 
 Chipset: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 pciid: 168c:0013 (rev 01)
 Driver: ftp://ftp.dlink.de//dwl-products/dwl-g520PLUS/Treiber_Firmware/dwlg520plus_WPA-utility-driver_2.02.zip
 Other: Works with WEP and WPA with TKIP cipher
 Other: Above drivers are for a German G520+ - NOT the American G520. I have no idea why the listed PCI is the same...  The . inf flie from the linked driver won''t match it!

 Card: D-Link Air Plus Xtreme G+ DWL-G520+ 54Mbps
 Chipset: TI-ACX111
 pciid: 104c:9066
 Driver: gplus.bin, ships with card
 Other: Tested on SuSE 9.1, Ndiswrapper 0.6 included in the distro. Working fine at 11Mbps, WEP also working.

 Card: D-Link AirPlus G+ DWL-G520+ 802.11g 54Mbps H/W Ver.: A3 F/W Ver.: 2.04
 Chipset: Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: used the WinXp driver that came with the Card: gplus.inf
 Other: Installed on Debian Sarge with selfcompiled ndiswrapper 0.11. Card working without problems with WEP. Also works on Mandriva 2006 with selfcompiled ndiswrapper 1.2.

 Card: D-Link AirPlus G+ DWL-G520+ 54Mbps (Sold in Europe)
 Chipset: Texas ACX 111
 pciid: 104c:9066
 Driver: used the Win 2000 driver that came with the card (gplus.inf). You can download it from here: ftp://ftp.dlink.co.uk/wireless/dwl-520+/dwl-520+_drv_v3.06_1007_inc_utility.zip
 Other: Tested with Mandrake 10.1 and Ndiswrapper 1.1 . Card working without problems with WEP.
 Other: Tested with SUSE 10 and Ndiswrapper 1.5. Works perfect, remember just to install a 32 bit system. ( Attention: Installs by default from DVD a 64 bit version assuming that your PC support 64 bit). Better to install from CDs (than it asks) that''s 32 bit for sure.

 Card: D-Link DWL-G520M Wireless 108G MIMO Desktop Adapter (bought in UK)
 Chipset: Atheros Communications, Inc. AR5005VL 802.11bg Wireless Chipset (rev 01)
 pciid: 168c:0020 (rev 01)
 Driver: ar5513.sys and net5513.inf from ftp://ftp.dlink.co.uk/wireless/dwl-g520m/dwl-g520m_drv_v1-1b3.zip
 Other: Fedora Core 5 and ndiswrapper from livna repository (utils: 1.8, driver: 1.13, vermagic: 2.6.16-1.2122_FC5 686 REGPARM 4KSTACKS gcc-4.1). Works with WEP. Not tested beyond a few hours of continuous operation.

 Card: D-Link DWL-G520+ - Hardware B1 - Firmware 3.00
 Chipset Texas Instruments ACX 111
 PCIID: 104c:9066
 Driver: ftp://ftp.dlink.co.uk/wireless/dwl-g520+_rev_Bx/dwl-g520+_rev_bx_driver_v3-00.zip (probably the cdrom driver may work too)
 Other: Debian Sid + Ndiswrapper 03092005CVS - Just some problems with ndiswrapper -i not copying .sys file. Working at 54Mb WPA-PSK using wpa_supplicant. Perfectly.

 Card: D-Link DWL-G630 rev B
 Chipset: Texas Instruments ACX 111
 pciid: 104c:9066
 Driver: http://support.dlink.com/products/view.asp?productid=DWL%2DG630%5FrevB#
 Other: Works with WEP but not with WPA. When trying to set the driver manually with wpa_supplicant command "...-D ndiswrapper" a message of "Driver doesn''t support WPA". I believe doing an "iwpriv" shows that it is not capable but the parameters are not defined so I cannot be sure.

 Card: D-Link DWL-G630, rev C
 Chipset: Atheros
 pciid: 168c:001a
 Driver: ftp://ftp.dlink.com/Wireless/dwlg630_revC/Drivers/dwlg630_driver_300.zip
 Other: Works with WEP and WPA with TKIP cipher.  ndiswrapper 1.1 compiled from source using Debian testing kernel

 Card: D-Link DWL-G630
 Chipset: Marvell W8300
 pciid: 11ab:1fa6
 Driver: http://www.asus.com.tw/support/download/item.aspx?ModelName=WL-138G
 Other: Works with WEP and WPA with TKIP cipher.

 Card: D-Link DWL-G630, rev C
 Chipset: Atheros
 pciid: 168c:001a
 Driver: ftp://ftp.dlink.com/Wireless/dwlg630_revC/Drivers/dwlg630_driver_300.zip
 Other: Works with WEP and WPA with TKIP cipher.  ndiswrapper 1.1 compiled from source using Debian testing kernel 2.4.27-2.

 Card: D-Link AirPlus DWL-G630 Canadian ...?
 Chipset: TI TNETW1130
 pciid: 104c:9066
 Driver: XP driver from http://www.dlink.com
 Other: Fedora Core I - linux-2.6.7 - ndiswrapper-0.11_rc1 (finally!)

 Card: D-Link Air Plus G PCMCIA DWL-G630 Chilean?
 Chipset: Atheros
 pciid: H/W Ver:| D1 F/W Ver:4.10 | 001a (Rev01).
 Driver: Xp Driver From http://www.dlink.com (neta3ab)
 Other: Works with Debian Sarge, ndiswrapper 1.7 so fine at 50mb/s (in theory). Personal Site http://itt.homelinux.org

 Card: D-Link Airplus DWL 650+
 Chipset: ACX100
 pciid: 104c:8400
 Driver: Windows drivers from http://www.dlink.com/ .  "Native" acx100 Linux driver available at http://lisas.de/~andi/acx100/ ; requires Firmware from Windows drivers. Please read README for details.
 Other: Tested on Slackware 10 with Ndiswrapper 0.8.  acx100 supports WEP (only tested 128bit).
 Other: Works Perfectly with Ndiswrapper 1.1 in Ad-Hoc mode ( 2005.05.12 ).  Howto: Craig''s ACX100/111 Guide for Linux &lt;http://www.houseofcraig.net/acx100_howto.php>

 Card: D-Link Airplus DWL 520+
 Chipset: ACX100
 pciid: 104c:8400
 Driver: Windows drivers from http://www.dlink.com/ .  "Native" acx100 Linux driver available at http://lisas.de/~andi/acx100/ ; requires Firmware from Windows drivers. Please read README for details. Windows driver is exactly the same as for DWL-650+
 Other: Works Perfectly with Ndiswrapper 1.1 in Ad-Hoc mode ( 2005.05.12 ).  Howto: Craig''s ACX100/111 Guide for Linux &lt;http://www.houseofcraig.net/acx100_howto.php>

 Card: D-Link DWL-510
 Chipset: Realtek RTL8180L
 pciid: 1186:3300
 Driver: Driver for RTL8180L from http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true#RTL8180L
 Other: D-Link-provided drivers give huge system lags, system stops responding for full seconds at a time. The Realtek driver works well, but to make the driver recognize the card you must manually edit the file NET8180.INF and change all references to the pci-id 10ec:8180 into 1186:3300. Note that you much change 8180 to 3300 only when it appears near or next to 10ec, and leave it otherwise. See http://www.samwel.tk/bart/various/dwl-510-on-linux-2.6.html.
 Comment: There is not allways a true! I use D-Link drivers, and they works fine for me, better than Realtek drivers.

 Card: D-Link DWL-610
 Chipset: Realtek RTL8180L
 pciid: 1186:3300
 Driver: Driver for RTL8180L from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 This drivers seems not to work with Mandrake 10 though, but with this one the D-Link driver works just fine.
 Other: See D-Link DWL-510 (the pci-id part). Works fine with 2.6 kernel and latest ndiswrapper. Seems not to work with Linux ubuntu 2.6.10-5-386, modprobe does not load at all even shows in dmesg, but seems to work with the drivers from the installation CD.

 Card: D-Link Air DWL-650
 Chipset: Realtek 8180
 pciid: 10ec:8180 (rev 20)
 Driver: XP Drivers from http://www.dlink.com
 Other: Tested on debian unstable with Ndiswrapper 0.8, kernel 2.6.5 custom on July 6th Works perfectly even under high transfer rates. Will come out of suspend properly. Ejecting card does NOT hang system. Issue: iwconfig reports 100% link quality all the time, even at high distances from access point ??

 Card: D-Link DWL-G650+ Rev A1, 54mbps
 Chipset: TI1130 (ACX111)
 pciid: 104c:9066
 Driver: DLink ftp://ftp.dlink.de/dwl-products/dwl-g650PLUS/Treiber_Firmware/dwlg650plus_WPA-utility-driver_2.02.zip
 Other: Ndiswrapper 0.11, Actual Gentoo Installation, Kernel 2.6.9. Works, tested with driver for Win XP, also with WEP

 Card: D-Link DWL-G650+ Rev B1, 54mbps
 Chipset: TI1130? (ACX111)
 pciid: 104c:9066
 Driver: DLink ftp://ftp.dlink.co.uk/wireless/dwl-g650+_rev_Bx/DWL-G650+_rev_Bx_Drv_v202.zip
 Other: SUSE 9.2 Ndiswrapper 0.10-3. Works fine also with 128 bit WEP. Installed Ndiswrapper that ships with SUSE 9.2. Add Dlink Driver with "ndiswrapper -i GPLUS.inf" Add "alias wlan0 ndiswrapper" to /etc/modprobe.conf.local. Load driver for the first time with "modprobe ndiswrapper." Plug in the card. Configure it with YAST. Be sure that in YAST networkcard setup at Advanced&rarr;Hardware Details the module is set to ndiswrapper. Since SUSE 9.2 ships with native linux acx-111 driver you might get the wrong driver loaded.  The linux acx-111 driver lacks support for WEP. Have to replug the card after a suspend to disk. Thanks for ndiswrapper.  Other:Also works with SUSE 9.3. See the readme file /usr/share/doc/packages/ndiswrapper/README.SUSE. No more replug after suspend to disk required. Also got WPA working. Only problem was that there is a typo in the script /etc/sysconfig/network/scripts/ifup-wireless-wpa ! Correct the typo in line 188 "WPA_DRIVER=ndiswrapper" !
 Troubleshooting: I used the new driver version 3.10 from www.dlink.de.  After "unshield data1.cab'' and "ndiswrapper -i GPLUS.inf'' I had an invalid driver message on "ndiswrapper -l''.  But then I "cp GPLUS.sys GPLUS_XP.sys /etc/ndiswrapper/gplus'', it works fine.

 Card: D-Link Air Plus Xtreme G DWL-G650, 108Mbps
 Chipset: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 pciid: 168c:0013
 Driver: Supplied driver in the installation CD
 Other: Tested with Fedora Core 2, Ndiswrapper 0.10.  Working well, tested with WEP also.
 Other: Tested with Slackware 10.0, kernel 2.4.26.  Ndiswrapper 1.0 (of 30.01.2005), version 2.54 of d-link drivers. Get the drivers at http://d-link.com/products/support.asp?pid=11&pv=5&sec=0.  Works fine - use net5211.inf
 Other: Tested with Fedora Core 3, kernel 2.6.10 Ndiswrapper 1.0 (of 30.01.2005), version 2.54 of d-link drivers. Get the drivers at http://d-link.com/products/support.asp?pid=11&pv=5&sec=0.  Works fine for me too with WEP

 Card: D-Link Air DWL-650
 Chipset: Realtek 8180
 pciid: 10ec:8180 (rev 20)
 Driver: XP Drivers from http://www.dlink.com
 Other: Tested on debian unstable with Ndiswrapper 0.8, kernel 2.6.5 custom on July 6th Works perfectly even under high transfer rates. Will come out of suspend properly. Ejecting card does NOT hang system. Issue: iwconfig reports 100% link quality all the time, even at high distances from access point ??

 Card: D-Link DWL-AG650  802.11a/b/g
 Chipset: Atheros
 pciid: 168c:0013
 Driver: Standard WinXP driver supplied on CD: NetA3AB.inf and A3AB9x.sys
 Other: ndiswrapper 0.10, Gentoo (vanilla kernel 2.4.26), works well and fast

 Card: D-Link WUA-1340(USB)
 Chipset: Ralink RT73 (RT2571W)
 usbid: 07d1:3c04
 Windows Driver: The newest driver, 3.0, for the DWL-G122 rev C1 can be used since the definition for both is in there.
 Other: H/W Ver A1, F/W Ver 1.00 Used drivers on CD, extracted with wine by running setup.exe in driver directory. Works with ndiswrapper 1.47

 Card: D-Link WUA-2340(USB)
 Chipset: Unknown (Atheros?)
 usbid: 07d1:3a07
 Driver: Driver available on accompanying CD and on www.dlink.com.  Installed on WinXP machine to get access to drivers in windows/inf folder, and program files/D-Link folder.  (I added both oem47.inf, athfmwdl.sys, ar5523.bin, and oem48.inf, a5agu.sys, ar5523.bin) EDIT: Worked only when: Used with ndiswrapper version 1.30; Used D-link driver version 101 with NetA5AGU.inf, this .inf file is the only driver file needed.
 Other: Able to recognize hardware (ndiswrapper -l showed hardware pressent) using same procedure as for the DWL-1340, but on loading the kernal module, wlan0 appeared but was not configurable and did not respond to ifdown/ifup, so I couldn''t get this device to work with ndiswrapper. EDIT: This device was able to work with ndiswapper version 1.30 and NetA5AGU.inf from D-link website
 Success: Though others above have had success with ndiswrapper version 1.30, I was unable to compile this old version against my kernel sources (2.6.22-suspend2-r2) due to a change in some kernel macro specs. Later versions of ndiswrapper would compile, install drivers, modprobe properly, but... nothing happened. No dmesg errors, but no dmesg output about loading drivers either, even though ndiswrapper -l showed the drivers there, and the hardware present. This has been fixed in ndiswrapper 1.49, which works perfectly with the neta5agu.inf driver (version 1.20). The wlan0 interface is initialized on my laptop, and by issuing a "ln -s /etc/init.d/net.lo /etc/init.d/net.wlan" followed by a "/etc/init.d/net.wlan start" my already-installed wpa_supplicant sprang into action and connected me to my WPA-PSK protected router. Can''t ask for more.

 Laptop: Dell Inspiron 4150 Card: TrueMobile 1300 (802.11b/g) WLAN miniPCI Card
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 0000:02:03.0
 Driver: http://ftp.us.dell.com/network/R94826.EXE
 Other: To install unzip (program "unzip" works on the .exe) the exe file and use bcmwl5.inf. 

 Laptop: Dell Inspiron 5100 Card: Wireless 1350 (802.11b/g) WLAN miniPCI Card
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)  _notice this is revision 02, below is revision 03, Idon''t know if it matters or not_
 pciid: 14e4:4320
 Driver: http://ftp.us.dell.com/network/R90501.EXE
 Other: This card is in the miniPCI slot of the Inspiron 5100. The driver below (R83097.exe) did not work, but this one did. To install unzip (program "unzip" works on the .exe) the exe file and use bcmwl5.inf. 

 Laptop: Dell Inspiron 5150 Card: Wireless 1350 (802.11b/g) WLAN miniPCI Card
 Chipset: Broadcom Corporation BCM#4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: ?
 Driver: ftp://ftp.us.dell.com/network/R83097.EXE
 Other: This card is in the miniPCI slot of the Inspiron 5150. This driver is for US only. I think this is a Truemobile 1350. To install unzip (program "unzip" works on the .exe) the exe file and use the bcmwl5a.inf in directory AR. 

 Laptop: Dell Inspiron 8200 Card: 1180 Internal Wireless 802.11b Mini-PCI card
 Chipset: Broadcom Corporation BCM4301 (rev 01)
 pciid: 14e4:4301
 Driver: http://ftp.us.dell.com/network/R46482.EXE
 Other: Unpack the driver from the exe file using wine, then use bcmwl5.inf.  Don''t use the drivers specified under other listings for BCM4301 as they cause the kernel to crash under repeated use!

 Card: Dell Truemobile 1300 minipci 54mbps
 Chipset: Broadcom BCM4306
 pciid: 14E4:4320
 Driver: http://ftp.us.dell.com/network/R94827.EXE
 Other: Works with WEP and WPA with either CCMP/AES or TKIP ciphers.  The INF file for this card specifies it should use 802.11b mode (upto 11Mbps) in Ad-Hoc mode. If you want to use 802.11g mode in Ad-Hoc mode, you need to change the setting IBSSGmode in the .conf files in the driver directory to 2.

 Card: Dell TrueMobile 1180 802.11b Adapter
 Other: Linux 2.6.15 i586 Fedora 5 on a HP Pavilion 6360 AMD K6
 Other: ndiswrapper-1.24
 Other: encryption mode used: WEP
 usbid: 413c:8100
 Driver: 1180 driver file is r51652 installed netdelus Win98 drivers.   http://support.dell.com search for r51652 or 1180 USB english a newer driver is available in r56450 on the dell website and will be tried after a kernel upgrade.
 Install notes:  ndiswrapper -i NETDELUS.INF  only installs the inf file, the other files in the W98SYS directory extracted with unshield must be manually copied to /etc/ndiswrapper/netdelus.

 Card: Dell Truemobile 1300 USB 2.0 54mbps
 Chipset: Unknown
 usbid: 413c:8102
 Driver: dellnic.inf + prisma02.sys on Windows driver CD-ROM of the card (on Dell website : http://ftp.us.dell.com/network/R74101.EXE)
 Other: Works with WEP and WPA with either CCMP/AES or TKIP ciphers.

 Card: Dell Truemobile 1350 minipci 54mbps
 Chipset: Broadcom Corporation BCM94306 802.11g (rev 03)
 pciid: 14e4:4320
 Driver: http://ftp.us.dell.com/network/R81433.EXE (use bcmwl5a.inf in directory AR)
 Other: So far, so good. WEP appears to work fine, as does WPA with CCMP/AES.

 Card: Dell Truemobile 1300 minipci
 Chipset: Broadcom  BCM4306
 pciid: 0000:01:03.0
 Driver: ftp://ftp.us.dell.com/network/R83097.EXE (using bcmwl6a.inf)
 Other: (Ubuntu) Problems listing the network configuration application at first, adding the interface manually to /etc/network/interfaces solved this and is now running perfectly.    

 Card: Dell Truemobile 1400 minipci 54mbps
 Chipset: Broadcom BCM4309 (rev 03)
 pciid: 14e4:4324
 Driver: http://ftp.us.dell.com/network/R76521na.EXE (use bcmwl5a.inf in directory AR)
 Other: Works with WEP and WPA with either CCMP/AES or TKIP ciphers.

 Card: Dell Truemobile 1400 minipci 802.11a/b/g
 Chipset: Broadcom BCM4309 (rev 02)
 pciid: 14e4:4324
 Driver: ftp://ftp.dell.com/network/R74092us.EXE for US, ftp://ftp.dell.com/network/R74091jp.EXE for Japan, ftp://ftp.dell.com/network/R74090rw.EXE for rest of world
 Other: (use bcmwl5a.inf in AR directory) Works with WEP and WPA with either CCMP/AES or TKIP ciphers.

 Card: Dell Truemobile 1800 minipci 802.11b
 Chipset: Broadcom BCM4301
 pciid: 14e4:4301 (rev 02)
 Driver: ftp://ftp.hp.com/pub/softlib/software3/COL3601/hb-17787-3/SP23107.exe
 Other: drivers supplied by DELL wont work, so use the one from link above.(inside archive choose bcmwl5a.inf) Works with WEP, SSID hidden, tested on Knoppix 3.6, ndiswrapper 0.8

 Card: Dell Wireless 1350 WLAN MiniPCI Card - Dell INSPIRON 2200
 Chipset: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318
 Driver: http://ftp.us.dell.com/network/R115321.EXE
 Other: Use the bcmwl5.inf and bcmwl5.sys under "driver" folder. Works well under Fedora Core 5. (kernel: 2.6.15-1.2054_FC5, Wireless extension v19, Wireless Tools v28)

 Card: Dell Wireless 1370 (802.11b/g) Dual-Band WLAN miniPCI Card
 Chipset: Broadcom BCM4318 (rev 02)
 pciid: 14e4:4318
 Driver: http://ftp.us.dell.com/network/R115321.EXE
 Other: Unzip and use bcmwl5.inf in DRIVERS folder. (My settings: 2.6.15.5, Wireless Ext. v19, Wireless Tools v28, WEP)

 Card: Dell Wireless 1390 WLAN MiniCard (Dell Inspiron E1405, Dell Inspiron E1505, Dell Latitude D620, Dell Inspiron 640m, Compaq Presario V3010AU, V3011AU)
 Chipset: Broadcom BCM4311
 pciid: 14e4:4311 (rev 01, subsys 1028:0007)
 Driver: generally called bcmwl5 http://ftp.us.dell.com/network/R115321.EXE, though reporting that R115321.EXE driver does not work for Kubuntu 6.06 LTS 64-bit (Kernel 2.6.15-27),http://ftp.us.dell.com/network/R140747.EXE UPDATE: The above driver has a mayor security bug, the newest driver is R140747.EXE.
 Alternate 64 bit driver: http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&dlc=en&tool=softwareCategory&product=3210693&os=228

 Card: Dell Wireless 1450 (802.11a/b/g) Dual-Band WLAN miniPCI Card
 Chipset: Broadcom BCM4309 (rev 03)
 pciid: 14e4:4324
 Driver: ftp://ftp.dell.com/network/R90501.EXE
 Other: Use bcmwl5a.inf in AR directory. ndiswrapper 1.0, kernel 2.6.10, gentoo. The ndiswrapper module has difficulties to start if your notebook isn''t connected to the sector.

 Card: Dell Wireless 1450 Dual-band (802.11a/b/g) USB 2.0 Adapter
 pciid: 413c:8104 Dell Computer Corp.
 Driver: DELLNIC.INF as shipped on CD.
 Other: ndiswrapper 1.2, kernel 2.6.11-1.1369_FC4 on Fedora Core 4.

 Card: Dell Wireless 1470 (802.11a/b/g) Dual-Band WLAN miniPCI Card
 Chipset: Broadcom BCM4319 (rev 02)
 pciid: 14e4:4319
 Driver: http://ftp.us.dell.com/network/R102320.EXE
 Other: Use bcmwl5.inf. Worked out of the box on Fedora Core 4, kernel 2.6.11.
 Other: The R102320.EXE driver did not work for me. The bcmwl5.inf contained in the "Driver" directory of http://ftp.us.dell.com/network/R115321.EXE works. (ndiswrapper 1.16, linux 2.6.16.14). Using it with WPA PSK.

 Card: Dell Wireless 1490 (802.11a/b/g) Dual-Band WLAN miniPCI Card
 Chipset: Broadcom BCM4310 (rev 01)
 pciid: 14e4:4312
 Driver: http://ftp.us.dell.com/network/R115321.EXE
 Other: Use bcmwl5.inf in the DRIVER directory.  Worked on Gentoo, ndiswrapper v1.13, kernel 2.6.15 (gentoo-sources)
 Other: ftp://ftp.us.dell.com/network/R102318.EXE  Worked for me on Ubuntu Dapper after the other driver listed here would fail.  NOTE: The version of ndiswrapper that comes with dapper will eventually fail if using an SMP kernel with either of these drivers.  The most recent version of ndiswrapper that I could get working with this driver is 1.15.
 Other: works also on Fedora Core 6 x86_64, using ndiswrapper 1.30 (dkms version provided by freshrpms.net) and WXP64 driver available here: http://ftp.us.dell.com/network/R140747.EXE (needed files: bcmwl5.inf and bcmwl564.sys)

 Card: Dell Wireless 1500 (802.11draft-n/a/g) WLAN MiniCard
 Chipset: Broadcom BCM4321(?) (rev 01)
 pciid: 14e4:4328
 Driver: http://ftp.us.dell.com/network/R129083.EXE
 Other: ndiswrapper v1.22-rc1, Ubuntu kernel 2.6.15-26-386

 Card: Dell Wireless 1505 (802.11draft-n/a/g) WLAN MiniCard
 Chipset: Broadcom BCM4321 (rev 03)
 pciid: 14e4:4328.5
 Driver: ftp://ftp.us.dell.com/network/R151517.EXE
 Other: ndiswrapper v1.46-1, Fedora 7 kernel 2.6.22.9_91

 Card: Diamond HomeFree Phoneline 10Mb PCI,  HPNA 2.0 (not wireless)
 Chipset: Broadcom BCM4210
 pciid: feda:a0fa
 Driver: 3C410 from ftp://ftp.3com.com/pub/nic/3c410/3c410.exe
 Other: Ubuntu 5.04 (Hoary), kernel 2.6.10-6, ndiswrapper-1.2.  Note this is not a wireless card. Although it works with ndiswrapper-1.2,  it did not work with either ndiswrapper-1.5 or ndiswrapper-1.8 releases; problems parsing the INF file.

 Card: Dick Smith XH8227, 54mbps (house brand repackaged from unknown vendor)
 Chipset: NET2280 USB 2.0 to PCI Bridge, Intersil ISL3880 Wireless LAN
 usbid: 09aa:1000
 Driver: Cdrom, WinXP driver included with adaptor. Driver is PRISMA02.sys.
 Other: Tested with Ubuntu 5.04, kernel 2.6.10-5-386. Worked immediately with the ndiswrapper (1.0 something) included with Ubuntu. WPA works with wpa_supplicant. Upgraded kernel to 2.6.10-5-k7 and ndiswrapper 1.2 - no longer worked (error on modprobe of "windows driver couldn''t initialize the device"). Problem is highmem support and USB device (known problem as of August "05). Workaround was to boot Ubuntu with mem=900mb as an option in GRUB.

 Card: Digicom Palladio Wave C (802.11b) 2.4GHz Cardbus
 Chipset: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)
 pciid: 10ec:8180
 Driver: ftp://ftp.targetgroup.it/digicom/comuni/driver/PalladioWaveC/PalWavC__WIN.zip
 Other: Tested on a 2.6.10-ck5 kernel (Gentoo)

 Card: Digitus DN-7001G RA (802.11a/b/g) PCMCIA
 Chipset:  RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
 pciid: 1814:0201 (rev 01)
 Driver: http://www.digitus.info/support/download/treiber/dn7001g-ra.zip

 Card: Digitus DN-7001G MV (802.11a/b/g) PCMCIA
 Chipset:  Marvell Technology Group Ltd.: Unknown device 1faa (rev 03)
 pciid: 11ab:1faa (rev 03)
 Driver: http://downloads.trendnet.com/TEW-421PC_B1/Driver/Utility_Driver_TEW-421PC_423PI_b1_2.00.zip
 Other: Does not seem to work with the delivered drivers, The XP ones from trendnet (Mrv8000c.*) seem to work well, tested on 2.6.10 (Ubuntu Hoary), there might be other chipsets in use, check below for Trendnet devices.

 Card: Digitus DN 7006MV (801.11b/g) PCI
 Chipset: Marvell Technology Group Ltd.:
 Driver: No longer available on the site but it was on the Driver CD
 Other: Card works great under Ubuntu 6.10, tested with kernel 2.6.17-10-386, but i tested it without encryption, because with encryption, there were some problems with connecting.

 Card: Digitus DN-7001GR (802.11a/b/g) PCMCIA
 Chipset:  Ralink RT61
 pciid: 1814:0301
 Driver: http://www.ralinktech.com/ralink/Home/Support/Windows.html. You need to install it on a Windows box to copy the files rt61.inf, rt61.sys and the firmware files rt2*.bin
 Other: Works fine (unencrypted, WEP, and WPA-EAP). Make sure you have at least version 1.35 of ndiswrapper.

 Card: Digitus DN-7006G/E (802.11a/b/g) PCI card
 Chipset:  Texas Instruments ACX 111
 pciid: 104c:9066
 Driver: tnet1130(Digitus) or WG311v2(Netgear) http://www.digitus.de/show.asp?content=/portal/www.digitus.de/de/service/driver
 Other: tested on 2.6.13 (SuSE 10). By system found as Netgear WG311v2 PCI card

 Card: Digitus DN-7036 (802.11b/g) PCI card
 Chipset:  Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 pciid: 168c:0013 (rev 01)
 Driver: http://www.digitus.info/scripts/download.asp?artnr=DN%2D7036
 Other: tested on 2.6.17 (Gentoo 2006.0), sometimes the net.wlan0 interface needs to be restarted

 Card: Draytek Vigor 520, 11Mbps
 Chipset: TI ACX100
 pciid: ?
 Driver: http://www.draytek.co.uk/support/download/V520_3994.zip
 Other: Works with the driver in the shipped cd.

 Card: Draytek Vigor 530, b/g
 Chipset: Prism USB
 pciid: 1106:3104
 Driver: http://www.support.draytek.co.uk/download/V530_10006.zip Zip file
 Other: http://www.draytek.co.uk/support/index.html UK support page.

 Card: D-Link DWL-122
 Chipset: Prism USB
 usbid: 2001:3700
 Driver: Get latest driver from ftp://ftp.dlink.com/Wireless/dwl122/Driver. Tested with driver version 102.
 Other: Works with WEP and WPA-PSK+TKIP. With this driver, other Prism USB (not Prism54) devices also may work.   This driver has a bug: When many stations are available in scan, it gives wrong data which may crash kernel. Use alternate (more recent) driver: Use driver for Netgear MA111v1 from ftp://downloads.netgear.com/files/ma111_CD_v2.0.zip and create alias for 2001:3700 to netma111 with "ndiswrapper -d 2001:3700 netma111''). netma111 doesn''t have issues with scanning.

 Card: D-Link DWL-AG530 Tri-Mode Dualband 802.11a/b/g 108Mbps PCI
 Chipset: Atheros AR5212
 pciid: 168c:0013, 1186:3a14 (rev 01)
 Driver: http://www.dlink.com/products/support.asp?pid=306&sec=0#drivers
 Other: Works very well with the driver on the webiste. Confirmed and working for SUSE Linux 10.0; a kernel recompile was required for compatibility with the latest version of ndiswrapper.

 Card: Digitus WLAN USB Adapter,USB 2.0,IEEE 802.11G,54Mbit
 Info:    128-BIT WEP Encryption,WPA Support SIS Chipset
 Chipset: sis163u
 usbid:  0457:0163 Silicon Integrated Systems Corp. 
 Photo:  http://www.digitus.info/scripts/digdetail.asp?artnr=DN-7003GC
 Driver: http://www.services.digitus.info/data/download/treiber/dn7003gv.zip
 Other: It worked here with ndiswrapper1.4. Just download the file above and install the WINDOWS XP driver

 Card: Digitus Wireless LAN Adapter 54Mbps, DN-7003GR
 Info: 128-BIT WEP Encryption
 Chipset: rt73 (Ralink)
 usbid: 148f:2573 Ralink Technology, Corp.
 Photo:  http://www.digitus.info/scripts/digdetail.asp?artnr=DN-7003GR
 Driver: http://www.services.assmann.com/download/adm/support-driver-1/dn7003gr.zip
 Other: Have to unpack driver on XP (rt73*, no luck with cabextract/unshield). Works perfectly with ndiswrapper-1.23 under Linux 2.6.17.11. Also works with rt73 driver from Ralink.info and hopefully soon with driver from http://rt2x00.serialmonkey.com

 Card: Dynamode WL-GI-600XA 54 Mbps Wireless PCI LAN Adaptor
 Chipset: Texas Instruments
 Driver: http://www.dynamode.co.uk/support/wireless_wl-gi-600xa.html driver on cd works fine
 Works with any later versions of ndiswrapper compiled from source. v1.50 works with Fedora8
 Other: not tested with WEP or WPA. Not encountered any problems in normal use.

 Card: Dynamode WL-GL-7008 54mbs WLAN USB adapter
 Info: WEP, WPA
 Chipset: SiS 163u
 usbid: 0d8e:0163
 Driver: Not on website (at least not on 23/2/2006, site @ http://www.dynamode.co.uk/support/wireless.html) driver on cd works fine
 Other: WEP works fine. WPA with wpa_supplicant works ok (some problems). works with ndiswrapper1.10

 Card: D-Link AirPlus DWL-G630 (Hardware revision C2)
 System: Dell Inspiron 8000
 Chipset: Atheros Communications, Inc. AR5212 Multiprotocol MAC/baseband processor (rev 01)
 pciid:  168c:001a (rev 01)
 Driver: Download WindowsXP driver version 300 from D-Link website.
 Distribution: Fedora Core 5
 Ndiswrapper version: 1.16
 wpa_supplicant version: 0.4.9

 Card: DRUC-U3 Wireless Network Adapter (IEEE 802.11g)
 Chipset:  Wistron
 usbid: 1435:0427
 Driver: PRISMA02.inf from Windows installation CD
 Other: ndiswrapper 1.9 installed from source in Ubuntu 7.04
 Other: I could only configure it through iwconfig

 Dynex DX-WGNBC
 Chipset Atheros
 pciid: 168c:001a (rev 01)
 driver net5211.inf and ar5211.sys off the CD
 Other: Ubuntu breezy (5.10).

 Card: Edimax EW-7108PCg (pcmcia)
 Chipset: RT2500
 pciid: 10b9:5451
 Driver: ndiswrapper 0.12 + Win2k driver from windows machine
 Other: Seems to work 100%.  Stable.

 Card: Edimax EW-7106PC
 Chipset: RTL8180L (rev 20)
 pciid: 10ec:8180
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180
 Other: Works with WEP. Having trouble getting power management working

 Card: Edimax EW-7126PC
 Chipset: RTL8180L (rev 20)
 pciid: 10ec:8180
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180
 Other: Works with WEP. Reasonably stable.

 Card: Edimax EW-7128g
 Chipset: RaLink RT2500
 pciid: 1814:0201 (rev 1)
 Driver: Ndiswrapper 0.11; .inf and .sys for Win2K from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Slackware 10.0. Hint: modify /etc/rc.d/rc.inet1 and replace instances of "eth" with "wlan"; also modify /etc/rc.d/rc.modules to load ndiswrapper. Running flawlessly for one day so far. Using WEP.

 Card: Eminent EM4055 usb dongle
 Chipset: RaLink RT2573
 pciid: 148f:2573
 Driver: rt73.inf and rt73.sys from directory ndis5 in data1.cab on CD that came with the device.
 Other: ndiswrapper 1.38 on Ubuntu 7.04. The USB device may not be plugged in during boot-up.

 Card: Encore Electronics ENLWI-G
 Chipset: Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03)
 pciid: 11ab:1faa (rev 03)
 Driver: http://www.encore-usa.com/Drivers/ENLWI-G_Driver_Utility_98SE-ME-2000-XP.zip
 Other: Tested on a Debian Etch (testing) system. At testing time, ndiswrapper was out of the testing tree, so I had to compile ndiswrapper from svn or from unstable tree. Both worked OK.

 Card: Encore Electronics ENPWI-G
 Chipset: Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03)
 pciid: 11ab:1faa (rev 03)
 Driver: http://www.encore-usa.com/Drivers/ENPWI-G_Driver_Utility_98SE-ME-2000-XP.zip
 Other: Tested on Ubuntu 6.06. Work with http://packages.ubuntu.com/dapper/misc/ndiswrapper-utils and http://packages.ubuntu.com/dapper/net/ndisgtk.

 Card: Encore Electronics ENPWI-B-RECA
 Chipset: RTL8180L (rev 20)
 pciid: 10ec:8180
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180
 Other: Appears to be completely generic Realtek implementation.

 Card: Encore Electronics ENUWI-G 802.11g, Wireless LAN USB Adapter
 Chipset: SiS163u
 usbid: 0457:0163
 Driver: Use the WindowsXP(TM) drivers proveed in CD shipped with product
 Other: Performance EXCELENT, Using CentOS 4.2, kernel 2.6.9-22.EL, ndiswrapper 1.8 and drivers of the cd of purchase, all following the instruccion of installation of these wiki.

 Card: Encore Electronics ENUWI-G 802.11g, Wireless LAN USB Adapter
 Chipset: SiS163u
 usbid: 0457:0163
 Driver:  Windows XP, 2K, or 98 drivers provided on the CD shipped with product, or from Encore website seem to work, for a while anyways.
 Other: I use SuSE 10.2 on an i686 system (Epia-M).

 Card: Encore Electronics ENUWI-SG 802.11g, Wireless LAN USB Adapter
 Chipset: Atheros Communications Inc, AR5523
 usbid: 0d8e:7801
 Driver: Need to get the drivers from window$ instalation (athfmwdl.inf/.sys, net5523.inf,ar5523.bin/.sys)
 Other: Tested on gentoo and ndiswrapper 1.16 using kernel 2.6.15.

 Card: E-Tech WGUS02
 Chipset: Ralink RT2500 (RT2572)
 usbid: 148f:2570
 Driver: Works with WinXP driver shipped with the product. May also be found at http://www.e-tech.nu/Support_Detail/wireless54 (not tested)
 Other: Succesfully tested on Debian GNU/Linux 3.1, kernel-2.6.8

 Card: EDIMAX EW7317UG 802.11g Wireless USB Adapter
 Chipset: ZyDas ZD1211
 usbid: 0ace:1211
 Driver: Works with WinXP driver shipped with the product.
 Other: Successfully tested on Fedora Core 5. kernel-2.6.15. Ndiswrapper version 1.21

 Card: EDUP Wireless 802.11g Hi-Gain USB Adapter with Rp-SMA Connector
 Chipset: ZyDas ZD1211B
 usbid: 0ace:1215
 Driver: Driver Shipped with Product(6.19.0.0) causes product to get hot(normal operation?) and lock up system.
 Driver:  Use Driver version 6.3.0.0 from here: http://www.airlink101.com/support/index.php?cmd=files&_a=download&id=165  or here: http://www.zonetusa.com/ProductDownload/ZyDas_11g_6.3.0.0-1.zip Still gets hot, but doesn''t crash your system.
 Other: Generic knock off procured from eBay.  Successfully tested on Slackware 12, Kernel 2.6.21.5-smp. Ndiswrapper version 1.48
 Other:  I should think this would apply to any device using the ZD1211B chipset.

 Card: EnGenius/Senao EUB-362 EXT long range 802.11b/g Wireless USB Adapter
 Chipset: Atheros AR5523
 usbid: 0cf3:0002
 Driver: Works with WinXP driver shipped with the product. I''m using version 2.1 of the manufacturer''s driver, downloaded from http://www.engeniustech.com/datacom/products/resources.aspx?cat=6&ID=154; I''ve managed to extract the files needed for ndiswrapper operation (3 files: ar5523.bin with 149544 bytes, ar5523.sys with 343904 bytes, and net5523.inf with 12989 bytes) by installing the driver on a Windows 2000 system running inside a VMWare guest VM, and then copying them from C:\WINNT\SYSTEM32).
 Other: Successfully tested on RedhatEL/CentOS 4.5, with custom kernels 2.6.20.14 and 2.6.22.9; Must use ndiswrapper version at least 1.49 (with version 1.48 things simply did not work: got lots of kernel logs, random lock-ups, rmmod hanging, network adapter going "deaf", etc).

 Card: Fujitsu-Siemens Connect2Air E-5400 USB
 Chipset: Intersil-Frisbee + Netchip
 usbid: 0bf8:1007 Fujitsu Siemens Computers
 Driver: works with WinXP driver shipped with the product
 Other: Successfully tested on Debian GNU/Linux 3.1, kernel 2.6.8-1 on a Maxdata T-1000, if you need help contact phantom@h07.org
 Other: Successfully tested on Gentoo... cheap (about 35 EUR) and works out of the box!!

 Card: Foxconn-WLL-3350 PCI
 Chipset: RALink RT2500
 pciid: Unknown Device 1814:0201
 Driver: NDISWrapper 1.2 and driver from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: New machine locked after modprobe with NDISWrapper 1.4; downgraded to 1.2 and it''s happy.  Had no luck with the open drivers available.

 Card: Fujitsu-Siemens Connect2Air E-5400 USB D1700
 Chipset: Conexant Cohiba Chipset
 usbid: 0BF8:1009
 Driver: Works with WinXP 32bit driver from the manufacturer''s homepage http://www.fujitsu-siemens.com/
 Other: Successfully tested on Suse 10.0 32bit on an AMD64.

 Notebook: Fujitsu-Siemens CELSIUS H240
 Chipset: Atheros Communications, Inc. Unknown device 001c (rev 01)
 pciid: 168c:001c (rev 01)
 Driver: NDISWrapper 1.19 and driver from www.fujitsu-siemens.com downloads page.  After navigating through to H240, the driver WN6301A for XP works well.  http://support.fujitsu-siemens.com/download/ShowDescription.asp?SoftwareGUID=3E44C404-7D1F-4150-84CE-59A28EC6C355&ClassID=AC615FFC-7823-40A5-B78F-6EF1287F48C9
 Other: Tested with Slackware 10.2, 2.6.17.4 built with GCC 3.4.6.

 Card: Gemtek WL850FJx (Conexant)
 Chipset: Intersil Corporation ISL3886 Prism Javelin/Prism Xbow (rev 01)
 pciid: 1260:3886 (rev 01)
 Driver:  from "http://download.fujitsu-siemens.com/Download/ShowDescription.asp?SoftwareGUID=3B928095-EEEE-4194-91A7-E0CBE2D28B56"
 Other: It came with Fujitsu-Siemens Amilo D1845 laptop. Working under debian, kernel 2.6.10

 Card: Gemtek WUBR177G
 Chipset: Realtek RT2573
 pciid: 15a9:0004
 Driver: OEM Windows Partition only
 Other: Comes as part of the Pavilion s7600n and similar products. Works well with Gentoo, kernel 2.6.17

 Card: Gigabyte GN-WP01GS (PCI)
 Chipset: Ralink RT61
 pciid:
 Driver: Windows XP driver on cd
 Other: Works well with openSUSE 10.3, kernel. 2.6.22. Not works with native linux driver (rt61pci or rt61). Native driver must be blacklisted - possible conflict with ndiswrapper.

 Card: Gigabyte GN-WPEAG
 Chipset: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 pciid: 168c:0013 (rev 01)
 Driver: WinXP driver on cd ver. 1.0
 Other: Successfully tested on Mandrake 10.1, kernel 2.6.8.1-10mdk, if you need help contact sambarza@tin.it.

 Card: Gericom WLAN PC Card / Realtek Semiconductor Co.  Ltd. FCC ID: PANWL 1102
 Chipset: Realtek RTL8180L
 pciid: 10ec:8180
 Driver: WinXP Build 154 ftp://202.65.194.18/cn/wlan/rtl8180l/winxp-8180(154).zip
 Other: Realtek driver version 1.54! I couldn''t get the card to work with version 1.70 or 1.73 card is detected but the leds remain blank, 1.54 works fine (Debian Sarge, 2.6.8 kernel, ndiswrapper 0.11) Please edit the following so details are given as above.

 Card: Gericom WLAN PC Card / Realtek Semiconductor Co.  Ltd. FCC ID: PANWL 1102
 Chipset: Realtek RTL8180L Rev 20
 pciid: 10ec:8180
 Driver: WinXP Build 154 ftp://202.65.194.18/cn/wlan/rtl8180l/winxp-8180(154).zip
 Other: Realtek driver version 1.54! I couldn''t get the card to work with version 1.70 or 1.73 card is detected but the leds remain blank, 1.54 works fine (Debian Sarge, 2.6.8 kernel, ndiswrapper 0.11)

 Card: Gericom WLAN PC Card / Realtek Semiconductor Co.  Ltd. RTL8180 Rev 20
 Chipset: Realtek RTL8180L Rev 20
 pciid: 10ec:8180
 Driver: WinXP Build 154 ftp://202.65.194.18/cn/wlan/rtl8180l/winxp-8180(154).zip
 Other: Realtek driver version 1.54! I couldn''t get the card to work with version 1.70 or 1.73 either. The card IS detected but the leds remain blank, 1.54 works fine (Debian Sarge, 2.6.9 kernel, ndiswrapper 0.12c) Thanks to above chap for the version 154 tip.  Please edit the following so details are given as above.

 Laptop: Gateway 7422gx
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 14e4:4320
 Driver: Follow this link: http://www.linuxant.com/driverloader/drivers.php and select "BCMWL564: 64-bit generic Broadcom 54g"
 Other: Tested on Fedora Core 3 (x86_64), with ndiswrapper 1.0 and 2.6.10-1.766_FC3. Use the 64-bit drivers. 32-bit drivers do not work with this 64bit os and AMD64 chip.

 Laptop: Gateway MX6440
 Chipset: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318
 Driver: bcmwl5.inf  from:  ftp://ftp.gateway.com/pub/hardware_support/drivers/win_xp/portable/m360/D00464-001-001.exe - extracted with wine
 Other: tested SUSE10.1-i586/ndiswrapper-1.23 (compiled from source). It is working good.

 Laptop: Gateway MX6445
 Chipset: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318
 Driver: bcmwl5.inf  from:  ftp://ftp.gateway.com/pub/hardware_support/drivers/win_xp/portable/m360/D00464-001-001.exe - extracted with wine
 Other: tested Slackware 11.0 with vanilla 2.6.16.37 kernel, ndiswrapper-1.37. It is working fine.

 Laptop: Maxdata VMX Centrino
 Chipset: Intel PRO/Wireless Lan 2100 3B
 pciid: 8086:1043
 Driver: w70n51.inf
 Other: Tested on Debian Sarge

 Laptop: IBM Thinkpad T41 and T42
 Chipset: Intel PRO/Wireless Lan 2100 3B
 pciid: 8086:1043
 Driver: 1rwc74ww.exe download from IBM drivers site ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/1rwc76ww.exe
 Other: Tested with WEP on Slackware 10.0 kernel 2.4.26 ndiswrapper 0.11
 Topcom Skyr@cer PC Card 3154G - Marvel (Driver: mrv8k51)
 Topcom PC Card CWC-800 - Works with Ndiswrapper 0.6-23 Suse 9.1 bcmwl5.sys river, install from CD via unshield
 ASUS WL-103b PCMCIA (Cardbus) card (Driver: bcmwl5a from Windows driver, don''t forget to recode the .inf from UTF16 to ASCII)

 Card: Gigafast WF721-AEX 802.11b
 Chipset: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)
 pciid: 10ec:8180 (rev 20) Driver:ftp://210.51.181.211/cn/wlan/ndis5x-8180(173).zip
 Other: Works well with Debian sarge with kernel 2.6.8-1-386 and ndiswrapper version 0.11. Note, don''t use the Windows XP driver comes with the card which DOSEN''T work with ndiswrapper. it can power up the card but can not get DHCP IP.

 Card: Gigafast WF721-AEX 802.11b
 Chipset: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)
 pciid: 10ec:8180 (rev 20)
 Driver:WinXP driver that came with the card
 Other: Works well with Debian sarge with kernel 2.6.8-1-386 or my custom 2.4.27 and ndiswrapper version 0.11. Note, couldn''t get the rtl8180(173) version to work as above. It found the card, but alas no LEDs. Resorting to the WinXP driver provided on the installation CD gave success.

 Card: Gigafast WF721-AEX 802.11b
 Chipset: Texas Instruments ACX 100 22 MBPS Wireless Interface
 Driver:WinXP driver that came with the card
 Other: SUSE Linux 10.0 with kernel 2.6.16 ndiswrapper

 Card: GetNet GW-91263 802.11b
 Chipset: RTL8180L
 Driver:WinXP driver found at:  http://getnetusa.com/copy/download/drivers/GW-9126v2.1_0902.zip
 Other: Make sure you use the WinXP driver in the zip package, and no other driver.  Ubuntu Dapper Drake 6.06.

 Card: Hamlet HNW100CI: PCI Wireless 11Mbps - 802.11b
 Chipset: ?
 pciid: 1317:8201
 Driver: Drivers on installation cd or http://www.hamletcom.com/english/support/driver.asp?id=827
 Other: Bought in Italy. Tested on Debian with 2.4.25 kernel and ndiswrapper 0.11. Followed instructions from Wiki installation guide. Works fine. Works with WEP.  Output from lspci: 02:06.0 Network controller: Linksys: Unknown device 8201 (rev 11)

 Card: Hamlet HNWP110
 Chipset: Realtek RTL8180L 802.11b MAC (rev 20)
 pciid: 10ec:8180
 Driver: Latest driver for winxp (173)
 Other: Just works with ndiswrapper 0.11+CVS, even with wep.

 Card: Hamlet HNW254CI: PCI Wireless 54Mbps - 802.11g
 Chipset: Texas Instruments TNET1130 (ACX111)
 pciid: 104c:9066
 Driver: Drivers on installation cd
 Other: Bought in Italy. Tested on Debian with 2.4.25 kernel and ndiswrapper 0.12+1.0rc2-1.

 Card: http://www.hamletcom.com/ Hamlet HNWU254G
 Chipset: http://www.ti.com/tnetw1450 Texas Instruments
 TNETW1450 Media Access Controller, TNETW3422 Radio Frequency Transceiver, TNETW3426 Radio Frequency Front End
 usbid: 07b8:b21a
 Driver: Driver from the installation cd for winXp
 Other: works with ndiswrapper-1.23.tar.gz.

 Card: Hawking HWC54D: PCMCIA Wireless 802.11g "High-Gain" (with flip-up antenna)
 Chipset: Ralink RT2500 PCI-ID: 1814:0201 (rev 01)
 Driver: http://www.ralinktech.com/drivers/Windows/RT2500V3.0.1.0_for_Win2003.zip Driver version Drv3.0.1.0 for Win2003_x86 (and others). Found at http://www.ralinktech.com/supp-1.htm

 Card: Hawking HWU54G: Mini Wireless-G USB 2.0 Adapter
 Chipset: ZyDAS ZD1211 (rev 2)
 Driver: http://www.hawkingtech.com/downloads.php?file_id=3105 It''s the Win XP driver
 Other: Tested on a Sony VAIO SR7K running Gentoo - 2.6.14-r2 kernel, ndiswrapper-1.5.

 Card: Hawking HWP54G: PCI wireless 802.11g
 Chipset: Texas Instruments ACX111 54Mbps wireless interface 
 PCI-ID 104c:9066
 Driver: windowsXP driver from enclosed CDROM Linux - Mepis 3.4-4 final Used ndiswrapper to install windowsXP drivers ndiswrapper-utils ver. 1.5-1 ndiswrapper-modules-2.6.15-1-586tsc ver. 1.5-1 +2.6.15-3ww1

 Card: Hercules Wireless G USB2
 Chipset: Ralink RT2500
 usbid: 06F8:E000
 Driver: use this one: http://lonewulf.free.fr/gentoo/wifi/HWGusb.tar.gz
 Other: Sucessfully tested on gentoo, using ndiswrapper 1.4@051016, included in the driver link below.

 Card: HP 54g W400
 Chipset: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 Driver: ar5211.sys and net5211.inf (from win xp)
 Other: HP/Compaq nw8000, Mandrake 10.1, ndiswrapper 0.11.

 Card: HP 54g W450
 Chipset: Broadcom BCM4306
 pciid: 14e4:4320 (rev 02)
 Driver: bcmwl5.sys and oem6.inf (got it off working windows install)
 Other: HP Pavilion ze5400 came with WinXP home. Took drivers off of that.

 Laptop: HP Pavilion 8050AE
 Chipset: Broadcom (Network controller: Broadcom Corporation: Unknown device 4319 (rev 02))
 pciid: 14e4:4319
 Driver: 32bit The driver supplied with WinXP (bcmwl5), 64bit: https://www.synapsenow.com/synapse/data/7117/documents/WLAN_Broadcom_BG(3.100.64.0_logo).zip
 Other: In 64bit mode :Configured with Suse-10.0 64bits mode, Made: ln -s /etc/ndiswrapper/bcmwl5/14E4:4318.5.conf /etc/ndiswrapper/bcmwl5/14E4:4319.5.conf

 Laptop: HP Pavilion 5097AE
 Chipset: Broadcom (Network controller: Broadcom Corporation: Unknown device 4319 (rev 02))
 pciid: 14e4:4319
 64bit: https://www.synapsenow.com/synapse/data/7117/documents/WLAN_Broadcom_BG(3.100.64.0_logo).zip
 Other: In 64bit mode: use ndiswrapper-1.2 (doesn''t work with 1.10 or 1.11) after installation do: ln -s /etc/ndiswrapper/bcmwl5/14E4:4318.5.conf /etc/ndiswrapper/bcmwl5/14E4:4319.5.conf

 Laptop: Lenovo 3000 N100 (0768-A2U)
 Card: Broadcom Wireless N 802.11n BCM94321MC (BCM4328)
 pciid: 14E4:4328
 Driver: http://ftp.us.dell.com/network/R140746.EXE (50MB+)
 Other: Tested with ndiswrapper 1.37 on openSUSE 10.2 x86_64 kernel v2.6.18.2. Tested with WPA2 and open wireless. Works Great! NOTE: If you use a 64bits Linux use a 64bits driver, otherwise it won''t work!

 Laptop: IBM T40 Card: IBM 11a/b/g Wireless LAN Mini PCI Adapter
 Chipset: Atheros
 pciid: 8086:103d
 Driver: wllanphl driver from ibm.com
 Other: Tested with ndiswrapper-1.1 with WEP under FC3 and now FC4test2 (2.6.11-1.1282_FC4). Works great.
 Intel Corp. PRO/Wireless LAN 2100 3B Mini

 Laptop: IBM T40
 pciid: 8086:1043
 Driver: 1rwc88ww.exe from ibm.com
 Other: i''ve seen others mention ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/1rwc76ww.exe , but I found this to be a dead link. Lenovo has a new link here: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-59438 I found it by starting here: http://www-307.ibm.com/pc/support/site.wss/DRVR-MATRIX.html#DLP 

 Card: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
 Laptop: Panasonic CF-W2
 pciid: 8086:1043
 Driver: w70n501.inf from intel.com
 Other: Tested on Debian Sarge (ndiswrapper 1.1 Debian package). I downloaded the XP driver from Intel''s driver website (zip file): http://downloadfinder.intel.com/scripts-df-external/Detail_Desc.aspx?agr=N&ProductID=944&DwnldID=11918&strOSs=44&OSFullName=Windows*%20XP%20Professional&lang=eng. I didn''t have any luck with other links here for this card.

 Card: InexQ (Unex) MR054g R01, 802.11b/g
 Chipset: Broadcom BCM4306 (rev 03)
 pciid: 14e4:4320 (rev 03)
 Driver: bcmwl5a from "ftp://ftp.inexq.com/Drivers/MR054g(R01).zip"
 Other:The card has worked for me since ndiswrapper-0.4.  Currently using ndiswrapper-1.1 with WEP encryption on FC3 (stock Fedora Kernel-2.6.10-1.766_FC3).

 Card: PCMCIA card INPROCOMM IPN2120 distributed by truckstop.net
 Chipset: INPROCOMM
 pciid: 17fe:2120
 Driver: ndis 1.1-4 w packaged WinXP driver and kernel 2.6.11 on Debian unstable
 Other: Truckstop.net is currently in litigation so the cards can be had for $10. The driver can be had from http://www.truckstop.net/support/C130-Driver.zip. lspci reports: Ethernet controller: Linksys, A Division of Cisco Systems: Unknown device 2120. I originally spotted this one on a support list for ndis under the Linksys brand.
 Other:Works great with the linksys driver found here: ftp://ftp.linksys.com/pub/network/wmp11_v4_dr.zip, with the LSIPNDS.inf file.

 Card: Intel(R) PRO/Wireless LAN 2100 3A Mini PCI Adapter
 pciid: 104c:8029
 Driver: w70n51.inf http://newsjpl.free.fr/linux/nx7000/rpm/w70n51.inf
 Driver: w70n51.sys http://newsjpl.free.fr/linux/nx7000/rpm/w70n51.sys
 Other: You need both of those drivers. I actually just got those files from my Windows XP machine in c:\windows\DELL\drivers\R64838\Drivers\WINXP\. Tested on Slackware 10.1 with kernel 2.4.29, ndiswrapper 1.1, with WEP on a Dell Inspiron 510m Pentium M Centrino (i686). Works great. What is wierd is that in Windows XP it says that my card is a 2100 3A, but in linux it says that it is a 2100 3B when i run "lspci".

 Card: Intel PRO/Wireless 2200BG
 pciid: 8086:4220
 Driver: version 8.0.0 ftp://aiedownload.intel.com/df-support/7440/eng/intel%20wireless%20proset%20%20-%208.0.0.167%20generic%20.exe
 Driver (latest): version 8.1.1.0 ftp://aiedownload.intel.com/df-support/7819/eng/wireless%208.1.1.0%20-%20generic%20tic%2088663.exe Other: Tested on Debian with kernel 2.6.8, ndiswrapper 0.11, w22n51.inf from version 8.1.1.0. w22n50.inf from version 8.0.0 does not appear to work.

 Card: Intel PRO/Wireless 3945ABG
 Driver: version 11.1.1.0 driver netw4v32.inf (from the intel web site) seemed to work fine but it turned out to be a dud. The Dell driver for the Dell Latitude D630 (http://ftp.us.dell.com/network/R164255.EXE) also has netw4v32.inf and this one worked on my Dell Latitude D630 - go figure. 
 Other: both drivers were evaluated on debian etch - wpa_supplicant didn''t seem to work, even with the Dell driver but WEP worked 
 pciid: 8086:4222
 Driver: version 10.1.0.13 http://www.intel.com/support/wireless/wlan/sb/cs-010623.htm (w39n51.inf, unfortunatly the download is 80MB because it''s packaged with "Intel PROset/Wireless software", and drivers for the 2200BG and 2915ABG). 
 Other: Tested on Gentoo Linux, with gentoo patched kernel 2.6.15-r1 (SMP hasn''t been tested yet, I had some problems with it, so reverted to non-SMP). You need to patch your kernel to use 16K Stacks (rather than the default 8K). Patches can be found via LinuxAnt. I found mine at http://www.linuxant.com/driverloader/wlan/downloads-patches.php.  

 Card: I-O Data WN-B11/USBSL
 usbid: 04bb:0924
 Driver: Use the WindowsXP driver from the CD that comes with the card.
 Other: Works with ndiswrapper 1.1 and kernel 2.6.8-24.10. I couldn''t get the card to work with ndiswrapper 1.2, but perhaps this is because I have an older version of Wireless Tools.

 Card: I-O Data WN-G54/CBMB - 802.11g/b Card Bus
 Chipset: Prism isl3886
 Driver: http://www.iodata.jp/lib/product/w/1189_winxp.htm (G54CBMB.INF, WNG54CBM.SYS)
 Other: Works with ndiswrapper 1.2 and kernel 2.6.11-1.369.11_FC4 

 Card: Iogear GWU513
 Chipset: Prism GT
 usbid: 124a:4023 (also 124a:4025)
 Driver: http://www.iogear.com/support/driver/GWU513_1203A.zip
 Other: Works fine with ndiswrapper-0.12rc1. Same usbid as Shuttle PN15 aka. Airvast WM168g.  Bugs: ndiswrapper 1.0_rc2 &rarr; Doesn''t work with kernel 2.6.10 and USB 2.0 (awlgtnic: probe of 3-3:1.0 failed with error -22), ndiswrapper 1.3 cvs works with 2.6.13.

 Card: Intellinet (Prod ID 521710) , 802.11b, www.intellinet-network.com
 Chipset: Realtek 8180L(rev 20)
 pciid: 10ec:8180 (rev 20)
 Driver:  from "ftp://202.65.194.18/cn/wlan/rtl8180l/ndis5x-8180(173).zip"
 Other:This card working great with Fedora core 3 and nidswrapper 0.12; manual configuration is needed, you must create "ifcfg-wlan0" file in "/etc/sysconfig/networking'' and adding modprobe ndiswrapper in modprobe.conf.

 Card: Intel PRO/Wireless 5000 LAN CardBus Adapter 802.11g
 Chipset: Atheros (Atheros Communications, Inc. AR5000 802.11a Wireless Adapter (rev 01))
 pciid: 168C:0007
 Driver: from Intel Website 5000_DRIVERS_1.0.1.33.EXE
 Other: It *seems* to work. I don''t habe a 802.11a net available to verify its functionality properly. Tested with ndiswrapper 1.2 on SUSE Linux 10.0. WEP support is announced.

 Laptop: IBM(Lenovo)Thinkpad T60 2623
 Chipset: Atheros AR5416
 Pciid: 168C:0024 (rev 01)
 Driver: 7iwc21ww.exe (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66449)
 Other: NdisWrapper 1.34, Fedora Core 6 (kernel 2.6.19-1.2895)

 Card: Jensen Scandinavia 6511 WLAN Mini USB Dongle
 Chipset: SiS 162u
 usbid: 0457:0162
 Driver: Tested with version 1.0.5 from http://www.sis.com/download/ but it probably works with the 1.0.4 version as well as the CD version.
 Other: Support for chipset was added in "ndiswrapper version 1.4", released 2005-10-06

 Card: Jensen Scandinavia Air:Link 6011 (PCMCIA)
 Chipset: Realtek RTL8180L (rev 20)
 pciid: 10ec:8180
 Driver: Tested with various of the realtek drivers. Didn''t work with any but the version 154 driver from 2003 (card didn''t power up). It''s getting hard to get ahold of so I''ve mirrored the driver at http://zarb.org/~zerodogg/mirrored/winxp-8180(154).zip
 Other: Tested with ndiswrapper version 1.2

 Card: KINGNET KN-W510U, 54 Mbps
 Chipset: sis163u (SiS 163U)
 USBID: 0A3A:0163
 Driver: sis163u.{sys,inf} (for Windows XP), from the cd or download from http://www.kingnet.com.cn/ or http://www.sis.com.tw

 Card: KTI KWB-7110, 11 Mbps
 Chipset: RealTek 8180 
 PCIID: 10ec:8180
 Driver: NETR8180.INF (for Windows XP), from the cd or download from http://www.ktinet.com.tw/data/product/KWB-6110-7110-Drivers.exe

 Card: LevelOne WNC-0300
 pciid: 168c:0013 subsys: 16ab:7302
 Chipset: Atheros
 Driver: from CD that comes with the card, version 2.1.3.1 (use the Win2000 driver)
 Other: Driver for use with ndiswrapper is prepackaged in Ark Linux &ndash; Ark Linux users simply "apt-get install driver-atheros".
 Other: The card seems to take very long to initialize; took about a minute to find the access point after "modprobe ndiswrapper". Works well afterwards.
 Other: A native driver is available at http://madwifi.sourceforge.net/, but so far I haven''t had any luck with that (doesn''t compile with 4k stacks enabled)

 Card: LevelOne WNC-0301
 pciid: 11ab:1fa6 subsys: 16ab:1fa6
 Chipset: Marvell Libertas
 Driver: from CD that comes with the card, version 2.3.0.3
 Other: Driver for use with ndiswrapper is prepackaged in Ark Linux &ndash; Ark Linux users simply "apt-get install driver-marvell".

 Card: LevelOne WNC-0301USB v3
 usbid: 148F:2573
 Chipset: rt73
 Driver: from CD that comes with the card, (LevelOne,11/03/2005, 1.00.01.0000) 

 Card: LevelOne WPC-0101 &ndash; http://www.level1.com/products3.php?sklop=8&id=540102
 Chipset: Realtek RTL8180L http://w3serv.realtek.com.tw/products/products1-2.aspx?modelid=2002111
 Driver: Version 1.73 of 2004/10/21 from Realtek http://w3serv.realtek.com.tw/downloads/downloads1-3.aspx?software=True&series=2002121#2002121Windows
 Other: simply unzip ndis5x-8180(173).zip and type "ndiswrapper -i net8180.inf"

 Card: Linksys @Home #HP200 Wireless-G
 Chipset: Marvell 88w8335 Libertas Rev. 03
 pciid: 11ab:1faa subsys: 1737:0047
 Driver: From product CD
 Other: Tested with Gentoo, works okay with WEP and TKIP. I originally tried other Marvell drivers (from 3com site) which caused a kernel panic.

 Card: Linksys WMP11 v2.7 802.11b
 Chipset: Broadcom BCM4301
 Driver: Downloaded Windows 2000 driver from Compaq site. FilenameSP28538.exe.
 Other: Mandrake 10.1 with 2.6.8.1 kernel.  NdisWrapper 0.90 built and installed. Use bcmwl5.inf.  If you''re having trouble getting card into Managed mode, put it auto mode first, then change to managed.

 Card: Linksys WMP11 v2.7 802.11b
 ndiswrapper version: 0.8
 Chipset: Broadcom Corporation BCM4301 802.11b (rev 02)
 pciid: 14e4:4301
 Driver: Version 3.8.28.0, Release Date: 11/15/02 from http://www.linksys.com  ownloads
 Other: Knoppix Linux 3.7 (2.4.27).  Interface doesn''t always come up, but easily fixed by root command ifup wlan0 

 Card: Linksys WMP11 v4 802.11b
 Chipset: InProComm? ?
 pciid: 17fe:2120
 Driver: Linksys ftp://ftp.linksys.com/pub/network/wmp11_v4_dr.zip
 Other: Debian Unstable/Sid with NdisWrapper 0.11.  You must install all three inf files from the driver zip file (I had to force NDIS to load all three drivers for the one card with the -d option on each inf). Card works great, but WEP is untested. Works great on Slackware 10.1 with a 2.6.10 kernel, and Ubuntu Breezy using the latest version of NdisWrapper.
 Fedora Core 5, Kernel 2.6.15-1.2054_FC5, works fine with ndiswrapper 1.13, I only needed the LSIPNDS.INF file.  I added the line ""alias wlan0 ndiswrapper"" to the /etc/modprobe.conf file so that the network configuration gui would pick it up.  Once I applied DNS, IP, Gate, Mask, ESSID, I was running wide open.  These are good inexpensive cards at any WalMart in USA.

 Card: Linksys WMP300N-DE Wireless-N PCI Adapter
 Chipset: Atheros AR5008
 pciid: 168c:0023
 Driver: Linksys AR5416 Linksys Box CD Ver. 1.05
 Driver Version: 6.0.0.160
 openSUSE Linux v 10.1, Kernel Version 2.6.16.27-0.9-bigsmp
 ndiswrapper: ndiswrapper-1.10-19
 That did it for me. Card works like a charm with ndiswrapper. Good luck.

 Card: Linksys WMP300N Wireless-N PCI Adapter
 Chipset: Broadcom Corporation BCM4329/BCM42055000 802.11b/g
 pciid: 14e4:4320
 Driver: Linksys ftp://ftp.linksys.com/pub/network/WMP300N-20060511.exe
 Driver Version: 4.80.9.2 Apr 24, 2006
 openSUSE Linux v 10.1
 ndiswrapper: ndiswrapper-1.28

 Card: Linksys WMP300N Wireless-N PCI Adapter
 Chipset: Broadcom Corporation BCM94321MP, 802.11b/g/Draft n
 pciid: 14e4:4329, reported by lspci as Broadcom BCM43XG Rev. 1, but according to bcmwl5.inf, it should be BCM43XNG
 Driver: Linksys WMP300N_20061117_dr.exe
 Driver version: 4.100.15.5
 Fedora Core 6, x86-64, kernel 2.6.18-1.2849.fc6-x86_64
 ndiswrapper: ndiswrapper-1.31.  1.28rc2 works also
 Note: other Broadcom draft n drivers, such as the Dell and others do not work.  They appear to support a device 14e4:4328 but not 4329.  Only the newest Linksys driver supports 64 bit.  Previous one did not.  According to iwconfig, getting speeds in the 200 Mbit/s range, even with tx power turned down to 10dBm. 
 As far as I can tell, draft N actually works.
 "This version of the driver also fixes a rootkit exploit'' see: http://blogs.zdnet.com/Ou/?p=365
 For older BCM cards, the file bcmwl5.inf does not contain the required data although I suspect the drivers themselves do.  Other manufacturers such as Dell have released updated drivers fixing the vulnerability. See: http://support.dell.com/support/downloads/download.aspx?c=us&cs=04&l=en&s=bsd&releaseid=R140746&SystemID=INS_PNT_P4_9400&os=WXPX&osl=en&deviceid=9805&devlib=0&typecnt=1&vercnt=2&formatcnt=1&libid=5&fileid=187886 which does not include information for 14e4:4329 however.

 Card: Linksys WMP300N Wireless-N PCI Adapter
 Chipset: Atheros 5416
 pciid: 168c:0023
 Driver: Belkin F5D8001 (just the ar5416.sys file). Rest, standard Linksys install CD
 Driver version: 6.0.1.4
 OpenSuSE 10.2
 ndiswrapper 1.29 (1.34 does not work - locks up the machine)
 Note: If you use the Linksys drivers then it seems to lose connections after a short time or on large downloads. Replace the ar5416.sys with the one from the Belkin drivers and this does not happen. The only change I made to net5416.inf was to update the version number.
 Note: This doesn''t work for Fedora 6 kernel 2.6.19 with ndiswrapper 1.25 (built in), 1.29 as above, 1.36, 1.37 or 1.38.  The first modprobe works ok, and even allows connection, but you cannot modprobe a second time - each time it maxes the CPU or crashes the kernel.  Same symptoms with a 16k stack sized kernel.

 Card: Linksys WMP54GS Wireless-G PCI Adapter with Speedbooster
 Chipset: Broadcom Corporation BCM94306 802.11g (rev 03)
 pciid: 14e4:4320
 Driver: Linksys ftp://ftp.linksys.com/pub/network/WMP54GS_20050406.exe (new version)
 Other: Ndiswrapper 0.11 and 0.12. Works fine with 64-bit WEP key and WPA supplicant (Fedora core-2, Kernel 2.6.8 and 2.6.9). Use WMP54GS.inf

 Card: Linksys WMP54G-EU V2, 54mbps
 Chipset: Broadcom BCM4306
 pciid: 14e4:4320
 Driver: version 3.30.15.0 as on Install CD shipped with card
 Other: Suse 9.2, updated linux kernel 2.6.8-24.10, Ndiswrapper 010-3 via YAST from Suse install DVD. Stable operation, WEP and Booting/Start-Up works well. Installed according the General Guide and the very good Suse Guide by Andrew M 8^0-meow.  (http://ndiswrapper.sourceforge.net/phpwiki/index.php/Suse Professional 9.1)
 Other:Debian testing, 2.4.26 kernel: Ndiswrapper from CVS, date 2005.03.04, driver from ftp://ftp.linksys.com/pub/network/WMP54Gv4_20040415.exe, using WPA with wpa_supplicant (from wpasupplicant .deb package)

 Card: Linksys WMP54G v3, 54mbps
 Chipset: Broadcom BCM94306
 pciid: 14e4:4320
 Driver: The current Linksys driver ftp://ftp.linksys.com/pub/network/WMP54Gv4_20040415.exe does work well with Ndiswrapper 1.0rc1. Use the driver in WMP54Gv4_20040415/Drivers/WMP54Gv2/bcmwl5.inf.
 Other: Debian Sarge, linux kernel 2.6.9, SMP, Ndiswrapper 1.0rc1 manual compile. WPA works with wpa_supplicant supplied with Debian (0.2.5), both broadcast and non-broadcast ssid.

 Card: Linksys WMP54G v4, 54mbps
 Chipset: Ralink RT2500
 pciid: 1814:0201
 Driver 0: Native GPL Ralink driver in Ubuntu Breezy (rt2500 and rt2500-source packages). Installed the source and manually built with "make''. Then used Gnome''s network configuration to setup the device. Seems to perform as well as Windows version, but haven''t tried WEP or WPA. My card was labeled WMP54G (EU), bought in 11/2005.
 Driver 1: RT2500.inf from the WMP54Gv4 directory on the CD (the bundled CD has both v2 and v4 drivers), or download the drivers straight from Linksys.
 Other: Debian Sarge, 2.4 kernel, and 128-bit WEP.  Works great. Also works with Mandrake 10.1 with the newest versions of Ndiswrapper, not the one included on the installation CD. Note that Ralink has provided the source for an official driver at http://www.ralinktech.com/supp-1.htm but I have not tested it yet.
 Driver 2: Open source driver of Ralink (serialmonkey) downloadable at http://prdownloads.sourceforge.net/rt2400/rt2500-1.1.0-b4.tar.gz?download. Tested with WPA

 Card: Linksys WMP54G v4.1, 54mbps
 Chipset: Ralink RT61
 pciid: 1814:0301 and 1814:0302
 Driver: Don''t use driver that ships with card, it didnt work with ndiswrapper. Use the close source driver from Ralink http://www.ralinktech.com. It compiles for 2.4 and 2.6 kernels.
 Other: The rt2x00 Open Source Project (http://rt2x00.serialmonkey.com) have now a driver - but realy beta.
 Other: The Ralink driver works great. It is not a plug and play, you need your kernel headers, the appropiate gcc (3.4) but when you can link it together and put it where it loads at startup, it works great. I am using WPA without any problem.

 Card: Linksys WMP54GX
 Chipset: Airgo networks Inc unknown device 0001
 pciid: 17cb:0001
 Driver (linksys): use the driver found on the linksys website at http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=application%2Fzip&blobheadervalue2=inline%3B+filename%3DWMP54GX_v10.zip&blobkey=id&blobtable=MungoBlobs&blobwhere=1129216876336&ssbinary=true

 Card: Linksys WPC11
 Chipset: Realtek RTL8180L
 pciid: 1186:3300
 Driver: Don''t use driver that ships with card. Use driver for RTL8180L from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 (Outdated) Also http://www.opendrivers.com/freedownload/211939/realtek-rtl8180l-wireless-driver-3.30.163.312-windows-download.html
 Other: See D-Link DWL-510 (the pci-id part). Works fine with 2.6 & kernel and ndiswrapper 0.8. also works with 2.4.29 Kernel and ndiswrapper 1.1

 Card: Linksys WPC11 v.4
 Chipset: Realtek RTL8180L
 pciid: 10ec:8180 (rev 20)
 Driver: Don''t use driver that ships with card. Use driver for RTL8180L for Windows XP from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 (Outdated) Also http://www.opendrivers.com/freedownload/211939/realtek-rtl8180l-wireless-driver-3.30.163.312-windows-download.html
 Other:The Realtek driver mentioned above works only with the 16KB stack kernels. I got mine for Fedora Core 3 from Linuxant.

 Card: Linksys WPC54G, 54mbps
 Chipset: Broadcom BCM94306
 Driver: ftp://ftp.linksys.com/pub/network/WPC54G_driver_utility_1.3.1.zip
 pciid: 14E4:4320
 Driver (Dell): http://ftp.us.dell.com/network/R76521na.EXE (use the file that ends in "j" if you live in Japan or "rw" for anywhere else)
 Other: Works with WEP and WPA with either CCMP/AES or TKIP ciphers.
 Driver (Linksys): ftp://ftp.linksys.com/pub/network/WPC54G_driver_utility_1.3.1.zip
 Other: Works without using any encryption.  Still trying to get it to work with WPA/TKIP.

 Card: Linksys WPC54G v2, 54Mbps
 Chipset: Texas Instruments ACX 111
 pciid: 104c:9066
 Driver: Linksys ftp://ftp.linksys.com/pub/network/wpc54gv2_driver_utility_v2.02.zip
 Other: linux-2.6.8-gentoo kernel, ndiswrapper 0.10.Kept having kernel panic (interrupt-related) upon module load until I set CONFIG_PCI_MSI=y (and unset CONFIG_4KSTACKS, just in case.) Also, used "ndiswrapper -i LSTINDS.INF" (NOT lsbcmnds.inf).  Works with 64 and 128-bit WEP. Sometimes need to repeat config info (and commit) repeatedly, else driver & card will ignore requested setup. Also works with Gentoo 2.6.9-r9, ndiswrapper 0.12 and drivers that came from CD. 
 Other: Working fine on Ubuntu Breezy Badger (kernel 2.6.12) using ndiswrapper 1.9 / ndiswrapper-utils 1.7 and lstinds.inf driver.
 Other: Ndiswrapper is not needed. In Ubuntu Dapper (and probably in other Linux distributions as well) this card is supported natively with the acx driver.  See http://ubuntuforums.org/showthread.php?t=75448

 Card: Linksys WPC54G v3, 54Mbps
 Chipset: Broadcom Corporation BCM4318 802.11/g Wireless LAN
 pciid: 14e4:4318
 Driver: ndiswrapper v1.3 with bcmwl5a.inf ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/ (Broadcom, 12/22/2004, v3.100.46.0)
 Other: linux-2.6.8 kernel, debian, card worked well
 Other: linux-2.6.14 kernel, debian, ndiswrapper 1.9, wpa_supplicant 0.4.7, driver ftp://ftp.linksys.com/international/drivers/WPC54G_driver_utility_v3.1.zip, works with WPA2

 Card: Linksys WPC54G v4, 54mbps
 Chipset: AirConn? IPROCOMM IPN 2220 (rev 01)
 pciid: 17fe:2220
 Driver: Linksys ftp://ftp.linksys.com/pub/network/WPC54G%20v4%20driver%20rev%201.22.1.2004.zip
 Used ndiswrapper -i WLINPDS.INF on Debian Sarge for the Linksys driver. Worked perfectly.
 Driver:IPN2220 ftp://ftp.rediris.es/sites/arklinux.org/arklinux/arklinux.org/apt/arklinux/dockyard/en/i586/RPMS.contrib/driver-ipn2220-2.10.03.2004-1ark.i586.rpm
 Other: Debian/Sarge 2.6.11, Ndhttp://ftp.us.dell.com/network/R140747.EXEiswrapper 1.1 with module asistant.Works with WEP 64bits and 128bits and WAP-PSK,other encription not tested

 Card: Linksys WPC54G v5, 54mbps
 Chipset: Marvell 88w8335
 pciid: 11ab:1faa
 Driver: http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1130276681921&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=0993481921B03
 This driver works with WPA (wpa supplicant - use "wext" instead of "ndiswrapper" as driver-parameter like this: "wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf -D wext -B") tested on a OpenSuse 10.3 System.
 Other: The ridiculous URL above appears to be the only way to get at the official driver, since there''s nothing obvious at the Linksys ftp site. Unpack WPC54Gv5.zip, then &lt;tt>ndiswrapper -i LSMVNDS.inf&lt;/tt>. I used FC3, kernel 2.6.12-1.1381_FC3 unmodified (despite the 4K page warning). There''s an UNIMPLEMENTED warning which looks serious, but from the mailing list archive can apparently be ignored. AP is Linksys 

 Card: Linksys WPC54G v7.1, 54mbps
 Chipset: Atheros AR5211
 pciid: 168C:001A
 Driver: Linksys http://www-uk.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=UK%2FLayout&cid=1129319258516&packedargs=sku%3D1165633412015&pagename=Linksys%2FCommon%2FVisitorWrapper
 Used ndiswrapper -i net5211.inf found in the /WPC54G-EU_v7_DRUT/Driver directory in the unzipped driver file.
 Other: Open Suse 10.2, kernel 2.6.18.2 WPA personal mode enabled. Other mode not tested.
 WAG354G.
 Other: The above driver did not work for me, but this other driver (for a card with the same pciid) did: http://www.airnetusa.com/downloads/driver/DRXP_AWD_AWN154_v11.zip

 Card: Linksys WPC54GS SpeedBooster, 54mbps/125mbps
 Chipset: BCM94306
 pciid: 14e4:4320 (rev 03)
 Driver: Linksys ftp://ftp.linksys.com/pub/network/wpc54gs_driver_utility_v1.0.zip
 Other: Ndiswrapper 0.10rc1 Manual compile. Works fine. Also reports speed up to 125Mb/s. Suspend/Rsume also works great. Great card, hassle freee install.
 Other: Ndiswrapper 1.9 manual compile on SuSE 9.0, kernel 2.4.32 (ix86). Have found more recent versions of ndiswrapper would compile but fail to load the module with an unresolved symbol error. Works great with the driver mentioned above together with WRT54G router and wpa_supplicant 0.4.6 (rpm binary)., with WPA enabled ("WPA Enterprise"-mode). Still I was not successful to get the card to authenticate with the router set to "WPA2 Enterprise"-mode. For SuSE 9.0 you will need to manually add libhistory.so.5 and libreadline.so.5 to your system in order to meet the requirements for wpa_supplicant (e.g. extract them from the readline-5.0-1.2.i586.rpm )
 Driver: From Linksys website, wpc54gs_driver_utility_v2.1%2C1.zip, with version number 3.100.64 and a release date of 07/28/2005.  Sorry, no direct link is possible, start from the homepage and look for the download section.
 Other: Unzipped the download, and used the drivers from the "Driver/NT" directory, with command ndiswrapper -i LSBCMNDS.inf.  ndiswrapper version 1.8 on Unbuntu 6.06.  No problems on an unencrypted network.

 Card: Linksys WPC54GS  v2 SpeedBooster, 54mbps/125mbps &ndash; http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1115416827132&pagename=Linksys%2FCommon%2FVisitorWrapper
 Chipset: Broadcom BCM4318 Airforce One 54g 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318 (rev 02)
 Driver: Linksys Driver CD: /mnt/cdrom0/Driver/NT/LSBCMNDS.inf, bcmwl5.sys, LSBCMNDS.cat
 Other: Kernel: 2.6.15-1-586tsc, Ndiswrapper: 1.5-1 via Debian Etch, wpasupplicant: 0.4.9-1. Works fine, per WPA . Reports speed up to 125Mb/s.

 Card: Linksys WPC54GX v1 SRX, 108mbps &ndash; http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1115416827233&pagename=Linksys%2FCommon%2FVisitorWrapper
 pciid: 17cb:0001
 Chipset: Airgo Networks Inc Unknown device 0001 (rev 01)
 Driver: WinXP NETANI.INF  http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1115416827233&pagename=Linksys%2FCommon%2FVisitorWrapper
 Other: Ubuntu 6.10 using kernel 2.6.17-10-generic and ndiswrapper (installed with apt). Used installation instructions at http://ubuntuguide.org/wiki/Ubuntu_Edgy#How_to_install_Windows_Wireless_Drivers_.28Ndiswrapper.29

 Card: Linksys WPC54GX4 Notebook Adapter with SRX 400 v1.0, 802.11g, 240mbps
 pciid: 17cb:0002
 Chipset: Airgo Networks Inc Unknown device 0002 (rev 01)
 Driver: Linksys Windows XP driver. Install with "tmimo3p.inf" &ndash;  http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859951738&pagename=Linksys%2FCommon%2FVisitorWrapper
 Other: Gentoo (IA32 arch, kernel: 2.6.22-gentoo-r5), ndiswrapper v1.48_rc1 (via emerge), wpa_supplicant v0.5.7 (via emerge) using 802.11g, WPA2 + TKIP + preshared key encryption to a Linksys WRT54GX4 802.11g Wireless Router with SRX 400 that has it''s SSID hidden. Works well.

 Card: Linksys WUSB11v4, 802.11b, USB 1.1
 usbid: 13B1:000B
 Chipset: M4301A, made by Ali
 Driver: Linksys Windows XP driver from ftp://ftp.linksys.com/pub/network/WUSB11v4_08272004.exe (driver is not available through http://www.linksys.com/download/default.asp). Install with WUSB11v4.inf 
 Other: Works with snapshot of 2005-08-21.

 Card: Linksys WUSB11v2.5, 802.11b, USB 1.1
 usbid: 066b:2212
 Chipset: prism2 (Atmel?)
 Driver: Linksys Windows XP driver from ftp://ftp.linksys.com/pub/network/wusb11v25.zip. Install with lswlusb.inf 
 Other: Works without any problems on SUSE 10.1 - Linux 2.6.16.13.
 Note: FTP link above always failed with 426 Failure writing network stream. Alternate download location is http://members.driverguide.com/driver/detail.php?driverid=97867&action=summary. (I haven''t installed it yet, but I''ll update once I do.)

 Card: Linksys WUSB54Gv1, 802.11b/g, USB 2.0
 Chipset: Prism54
 usbid: 5041:2234
 Driver: Linksys Windows XP driver http://www.linksys.com/download/default.asp
 Other: Works smoothly, of course ;) - this is the device the USB extension was originally developed for. WEP is running, WPA is supported using wpa_supplicant 0.2.5. No problems with both 1.1 and 2.0 host controllers. As with many other USB devices, no success with 2.4 kernels so far. Try to use 2.6.7 or better. There is a native driver for Prism54 that is working on USB support. View its status at Prism54.org
 Other: Works with latest Windows Driver from linksys.com. No success with 2.4 kernels (even with 8k stack). Works with kernel 2.6.11 and 2.6.12. Works smoothly with 2.6.12 and ndiswrapper 1.14.
 Other: Driver from Linksys is old. Alternate driver for Sitecom WL-125 driver at http://www.sitecom.com/showdownload.php?id=1998 is newer version. With this, the card doesn''t disconnect. Tested with card with usbid 1915:2234.

 Card: Linksys WUSB54Gv4, 802.11b/g, USB 2.0
 Chipset: RT2500USB (RT2571F) (They just changed the chip and didn''t tell anybody. Be careful which version (v1/v2/v4) you buy!)
 usbid: 13b1:000d
 Driver 00: Ralink Driver, Open Source: http://rt2x00.serialmonkey.com/ - 2005-07-25 / Good alternative to ralinktech.com''s driver. Works WELL.
 Driver 0: Ralink driver: http://www.ralinktech.com/supp-1.htm - 2005-03-25 / Drv2.0.1.0, rt2500usb.inf & rt2500usb.sys Notes: ndiswrapper v1.2-rc1, kernel 2.6.11.7 (also works with grsec2 patch v2.1.5): works on both USB2.0 (load with modprobe ehci-hcd log2_irq_thresh=4 to avoid "usb X-Y: reset high speed USB device using ehci_hcd and address Z") and USB1.1 (UHCI (OHCI not tested (yet?))). WEP works with 64bit and 128bit keys. but bitrate is only 11Mbit/s Note: rename the configuration file for the adapter once you  installed the drivers (getting them extracted is quite a mess (WINE/Cedega) you need rt2500usb.*). "mv /etc/ndiswrapper/rt2500usb/148F\:2570.0.conf /etc/ndiswrapper/rt2500usb/13b1\:000d.0.conf'' should do the trick.
 Driver 1: Linksys Windows XP driver: http://www.linksys.com/download/default.asp Notes: ndiswrapper v1.1, kernel 2.6.11.7 vanilla: kernel-oops!  ndiswrapper v1.2-rc1 loads fine (EHCI loaded with modprobe ehci-hcd log2_irq_thresh=4) but oopses when unloading the module and the adapter is still plugged in (Kernel 2.6.11.7 vanilla). Yet transmission seems to fail completely (except increasing "Tx Invalid misc'' values nothing happens).
 Driver 2: older Linksys Windows XP driver: ftp://ftp.linksys.com/pub/network/WUSB54Gv4_20040703.exe Notes: ndiswrapper v1.2-rc1, kernel 2.6.11.7 (also works with grsec2 patch v2.1.5): seems to work, but only 11Mbit/s and without any encryption. no need to unplug the device before removing the ndiswrapper module. works on USB2.0, USB1.1 not tested (yet).
 Driver 3:There is a native driver for rt2x00 but it has no USB support yet. View its status at rt2x00.serialmonkey.com

 Card: Linksys WUSB54GR, Wireless-G USB Adapter with RangeBooster, 802.11g, USB 2.0
 Chipset: RT73
 usbid: 13b1:0023
 Driver: http://www.ralinktech.com/drivers/Linux/RT73_Linux_STA_Drv1.0.3.6.tar.gz
 Other: This thread helped me figure out how to install the driver: http://www.linuxquestions.org/questions/showthread.php?t=479867    Don''t rely just on the OP, you should scan the whole thread.

 Card: Linksys WUSB54GSv1, 802.11b/g, USB 2.0
 Chipset: Broadcom - BCM4320?????
 usbid: 13b1:000e
 Driver: For 32bit versions, follow instructions for v2 below, replacing the device id 13b1:0014 with 13b1:000e
 Driver: For 64bit versions: get the usb8023.sys and rndismp.sys from a Windows XP / Vista 64bit installation. Also make sure you have the latest SVN version (or 1.20+). If you use this in combination with the .inf file from the official drivers as found on the LinkSys Support-site, it all works (even WEP and WPA)

 Card: Linksys WUSB54GSv2, 802.11b/g, USB 2.0
 Chipset: Broadcom - BCM4320SKFBG
 usbid: 13b1:0014
 Driver: You can install this driver by either of the following two methods.
 *Method1: The driver for this RNDIS card doesn''t include two .sys files required (usb8023k.sys and rndismpk.sys or usb8023x.sys and rndismpx.sys), as they are part of Windows installation and don''t need to be installed in Windows. However, other drivers for different cards based on RNDIS include these .sys files. One is Belkin F5D7051uk at http://www.belkin.com/support/download/downloaddetails.asp?download=1871&lang=1. You can install this driver with BCMRNDIS.INF, then, copy sys files with "cp USB8023K.sys /etc/ndiswrapper/bcmrndis/usb8023k.sys; cp RNDISMPK.SYS /etc/ndiswrapper/bcmrndis/rndismpk.sys''. You then need to inform ndiswrapper that this driver, bcmrndis, should be used for usbid of WUSB54GSv2 (13b1:0014), by executing "ndiswrapper -d 13b1:0014 bcmrndis''
 *Method2: Used the inf file from the CD, and the .SYS files from usr5420 available at www.usr.com http://www.usr-emea.com/support/s-prod-template.asp?loc=unkg&prod=5420. Used snapshot from 13/02/2006, along with the usr system files that i had to install on a windows machine to extract. Then copied the wusb54gs.inf and wusb54gsv2.inf to the folder with the sys files - the wusb54gs.inf worked seamlessly with my device on the snapshot.!
 With 2.6.16 kernels and later, you also need to configure udev; see entry for USR5421 below for details.

 Card: Linksys WUSB54GSC, 802.11b/g, USB 2.0
 Chipset: Broadcom
 USBID: Vendor=13b1 ProdID=0026 (13b1:0026)
 Driver: Downloaded driver http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1154470123093&pagename=Linksys%2FCommon%2FVisitorWrapper here and install.  Copied the win files (usb8023.sys and rndismp.sys) from the F5D7051.exe http://www.belkin.com/support/download/downloaddetails.asp?download=1871&lang=1 download to the /etc/ndiswrapper/wusb54gsc/ folder.  Lastly, use the script detailed http://www.ubuntuforums.org/showthread.php?t=225206 here , modidifed with the correct USB ProdID (0026), to get the power working.  It''s in the section "Getting WUSB54GS to Work in Edgy and Feisty''  Also check out the thread http://www.linuxquestions.org/questions/showthread.php?p=2559643 here for why the script is needed and works.
 Other: With 2.6.16 and later kernels, RNDIS devices are not initialized (when device is plugged in, nothing happens). To get it going, you need to set the variable bConfigurationValue in sysfs. An easy way to do this is to add this: BUS==”usb”, SYSFS{idProduct}==”0026”, SYSFS{idVendor}==”13b1”, PROGRAM="/bin/sh -c "echo 1 > /sys/%p/device/bConfigurationValue''" to /etc/udev/rules.d/&lt;ruleFilename> file and restart udev. For FC6 &lt;ruleFilename> is 50-udev.rules.

 Card: Linksys WUSB54GPv1
 Chipset: Prism54
 USBID: Vendor=5041 ProdID=2235 (5041:2235)
 Driver: I got this working (with WPA-PSK CCMP/TKIP) effortlessly using the ndiswrapper/wpa_supplicant packages bundled on the Ubuntu 6.06 CD.  I used the Linksys WUSB54GPv4 1.02.00 driver release http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1115416827622&pagename=Linksys%2FCommon%2FVisitorWrapper here which also includes the WUSB54GPv1 drivers in their own folder.  I have not checked if this driver is the same as the one in the seperate WUSB54GPv1 driver release; I just know it works.  Also, i had to blacklist the islsm modules (www.prism54.org) that ship with Ubuntu.

 Card: Linksys WPC300N PCMCIA v1 (US Version)
 Chipset: Broadcom
 Driver: BCM40100/bcmwl5 (http://www.station-drivers.com/telechargement/broadcom/BCM40100.exe)
 Other: Ubuntu Edgy (6.10), ndiswrapper version 1.34

 Card: LevelOne WNC-0300
 pciid: 168c:0013 subsys: 16ab:7302
 Chipset: Atheros
 Driver: from CD that comes with the card, version 2.1.3.1 (use the Win2000 driver)
 Other: Driver for use with ndiswrapper is prepackaged in Ark Linux &ndash; Ark Linux users simply "apt-get install driver-atheros".
 Other: The card seems to take very long to initialize; took about a minute to find the access point after "modprobe ndiswrapper". Works well afterwards.
 Other: A native driver is available at http://madwifi.sourceforge.net/, but so far I haven''t had any luck with that (doesn''t compile with 4k stacks enabled)

 Card: LevelOne WNC-0301
 pciid: 11ab:1fa6 subsys: 16ab:1fa6
 Chipset: Marvell Libertas
 Driver: from CD that comes with the card, version 2.3.0.3
 Other: Driver for use with ndiswrapper is prepackaged in Ark Linux &ndash; Ark Linux users simply "apt-get install driver-marvell".

 Card: LevelOne WNC-0301USB v3
 usbid: 148F:2573
 Chipset: rt73
 Driver: from CD that comes with the card, (LevelOne,11/03/2005, 1.00.01.0000) 

 Card: LevelOne WPC-0101 &ndash; http://www.level1.com/products3.php?sklop=8&id=540102
 Chipset: Realtek RTL8180L http://w3serv.realtek.com.tw/products/products1-2.aspx?modelid=2002111
 Driver: Version 1.73 of 2004/10/21 from Realtek http://w3serv.realtek.com.tw/downloads/downloads1-3.aspx?software=True&series=2002121#2002121Windows
 Other: simply unzip ndis5x-8180(173).zip and type "ndiswrapper -i net8180.inf"

 Card: Linksys @Home #HP200 Wireless-G
 Chipset: Marvell 88w8335 Libertas Rev. 03
 pciid: 11ab:1faa subsys: 1737:0047
 Driver: From product CD
 Other: Tested with Gentoo, works okay with WEP and TKIP. I originally tried other Marvell drivers (from 3com site) which caused a kernel panic.

 Card: Linksys WMP11 v2.7 802.11b
 Chipset: Broadcom BCM4301
 Driver: Downloaded Windows 2000 driver from Compaq site. FilenameSP28538.exe.
 Other: Mandrake 10.1 with 2.6.8.1 kernel.  NdisWrapper 0.90 built and installed. Use bcmwl5.inf.  If you''re having trouble getting card into Managed mode, put it auto mode first, then change to managed.

 Card: Linksys WMP11 v2.7 802.11b
 ndiswrapper version: 0.8
 Chipset: Broadcom Corporation BCM4301 802.11b (rev 02)
 pciid: 14e4:4301
 Driver: Version 3.8.28.0, Release Date: 11/15/02 from http://www.linksys.com  ownloads
 Other: Knoppix Linux 3.7 (2.4.27).  Interface doesn''t always come up, but easily fixed by root command ifup wlan0 

 Card: Linksys WMP11 v4 802.11b
 Chipset: InProComm? ?
 pciid: 17fe:2120
 Driver: Linksys ftp://ftp.linksys.com/pub/network/wmp11_v4_dr.zip
 Other: Debian Unstable/Sid with NdisWrapper 0.11.  You must install all three inf files from the driver zip file (I had to force NDIS to load all three drivers for the one card with the -d option on each inf). Card works great, but WEP is untested. Works great on Slackware 10.1 with a 2.6.10 kernel, and Ubuntu Breezy using the latest version of NdisWrapper.
 Fedora Core 5, Kernel 2.6.15-1.2054_FC5, works fine with ndiswrapper 1.13, I only needed the LSIPNDS.INF file.  I added the line ""alias wlan0 ndiswrapper"" to the /etc/modprobe.conf file so that the network configuration gui would pick it up.  Once I applied DNS, IP, Gate, Mask, ESSID, I was running wide open.  These are good inexpensive cards at any WalMart in USA.

 Card: Linksys WMP300N-DE Wireless-N PCI Adapter
 Chipset: Atheros AR5008
 pciid: 168c:0023
 Driver: Linksys AR5416 Linksys Box CD Ver. 1.05
 Driver Version: 6.0.0.160
 openSUSE Linux v 10.1, Kernel Version 2.6.16.27-0.9-bigsmp
 ndiswrapper: ndiswrapper-1.10-19
 That did it for me. Card works like a charm with ndiswrapper. Good luck.

 Card: Linksys WMP300N Wireless-N PCI Adapter
 Chipset: Broadcom Corporation BCM4329/BCM42055000 802.11b/g
 pciid: 14e4:4320
 Driver: Linksys ftp://ftp.linksys.com/pub/network/WMP300N-20060511.exe
 Driver Version: 4.80.9.2 Apr 24, 2006
 openSUSE Linux v 10.1
 ndiswrapper: ndiswrapper-1.28

 Card: Linksys WMP300N Wireless-N PCI Adapter
 Chipset: Broadcom Corporation BCM94321MP, 802.11b/g/Draft n
 pciid: 14e4:4329, reported by lspci as Broadcom BCM43XG Rev. 1, but according to bcmwl5.inf, it should be BCM43XNG
 Driver: Linksys WMP300N_20061117_dr.exe
 Driver version: 4.100.15.5
 Fedora Core 6, x86-64, kernel 2.6.18-1.2849.fc6-x86_64
 ndiswrapper: ndiswrapper-1.31.  1.28rc2 works also
 Note: other Broadcom draft n drivers, such as the Dell and others do not work.  They appear to support a device 14e4:4328 but not 4329.  Only the newest Linksys driver supports 64 bit.  Previous one did not.  According to iwconfig, getting speeds in the 200 Mbit/s range, even with tx power turned down to 10dBm. 
 As far as I can tell, draft N actually works.
 "This version of the driver also fixes a rootkit exploit'' see: http://blogs.zdnet.com/Ou/?p=365
 For older BCM cards, the file bcmwl5.inf does not contain the required data although I suspect the drivers themselves do.  Other manufacturers such as Dell have released updated drivers fixing the vulnerability. See: http://support.dell.com/support/downloads/download.aspx?c=us&cs=04&l=en&s=bsd&releaseid=R140746&SystemID=INS_PNT_P4_9400&os=WXPX&osl=en&deviceid=9805&devlib=0&typecnt=1&vercnt=2&formatcnt=1&libid=5&fileid=187886 which does not include information for 14e4:4329 however.

 Card: Linksys WMP300N Wireless-N PCI Adapter
 Chipset: Atheros 5416
 pciid: 168c:0023
 Driver: Belkin F5D8001 (just the ar5416.sys file). Rest, standard Linksys install CD
 Driver version: 6.0.1.4
 OpenSuSE 10.2
 ndiswrapper 1.29 (1.34 does not work - locks up the machine)
 Note: If you use the Linksys drivers then it seems to lose connections after a short time or on large downloads. Replace the ar5416.sys with the one from the Belkin drivers and this does not happen. The only change I made to net5416.inf was to update the version number.
 Note: This doesn''t work for Fedora 6 kernel 2.6.19 with ndiswrapper 1.25 (built in), 1.29 as above, 1.36, 1.37 or 1.38.  The first modprobe works ok, and even allows connection, but you cannot modprobe a second time - each time it maxes the CPU or crashes the kernel.  Same symptoms with a 16k stack sized kernel.

 Card: Linksys WMP54GS Wireless-G PCI Adapter with Speedbooster
 Chipset: Broadcom Corporation BCM94306 802.11g (rev 03)
 pciid: 14e4:4320
 Driver: Linksys ftp://ftp.linksys.com/pub/network/WMP54GS_20050406.exe (new version)
 Other: Ndiswrapper 0.11 and 0.12. Works fine with 64-bit WEP key and WPA supplicant (Fedora core-2, Kernel 2.6.8 and 2.6.9). Use WMP54GS.inf

 Card: Linksys WMP54G-EU V2, 54mbps
 Chipset: Broadcom BCM4306
 pciid: 14e4:4320
 Driver: version 3.30.15.0 as on Install CD shipped with card
 Other: Suse 9.2, updated linux kernel 2.6.8-24.10, Ndiswrapper 010-3 via YAST from Suse install DVD. Stable operation, WEP and Booting/Start-Up works well. Installed according the General Guide and the very good Suse Guide by Andrew M 8^0-meow.  (http://ndiswrapper.sourceforge.net/phpwiki/index.php/Suse Professional 9.1)
 Other:Debian testing, 2.4.26 kernel: Ndiswrapper from CVS, date 2005.03.04, driver from ftp://ftp.linksys.com/pub/network/WMP54Gv4_20040415.exe, using WPA with wpa_supplicant (from wpasupplicant .deb package)

 Card: Linksys WMP54G v3, 54mbps
 Chipset: Broadcom BCM94306
 pciid: 14e4:4320
 Driver: The current Linksys driver ftp://ftp.linksys.com/pub/network/WMP54Gv4_20040415.exe does work well with Ndiswrapper 1.0rc1. Use the driver in WMP54Gv4_20040415/Drivers/WMP54Gv2/bcmwl5.inf.
 Other: Debian Sarge, linux kernel 2.6.9, SMP, Ndiswrapper 1.0rc1 manual compile. WPA works with wpa_supplicant supplied with Debian (0.2.5), both broadcast and non-broadcast ssid.

 Card: Linksys WMP54G v4, 54mbps
 Chipset: Ralink RT2500
 pciid: 1814:0201
 Driver 0: Native GPL Ralink driver in Ubuntu Breezy (rt2500 and rt2500-source packages). Installed the source and manually built with "make''. Then used Gnome''s network configuration to setup the device. Seems to perform as well as Windows version, but haven''t tried WEP or WPA. My card was labeled WMP54G (EU), bought in 11/2005.
 Driver 1: RT2500.inf from the WMP54Gv4 directory on the CD (the bundled CD has both v2 and v4 drivers), or download the drivers straight from Linksys.
 Other: Debian Sarge, 2.4 kernel, and 128-bit WEP.  Works great. Also works with Mandrake 10.1 with the newest versions of Ndiswrapper, not the one included on the installation CD. Note that Ralink has provided the source for an official driver at http://www.ralinktech.com/supp-1.htm but I have not tested it yet.
 Driver 2: Open source driver of Ralink (serialmonkey) downloadable at http://prdownloads.sourceforge.net/rt2400/rt2500-1.1.0-b4.tar.gz?download. Tested with WPA

 Card: Linksys WMP54G v4.1, 54mbps
 Chipset: Ralink RT61
 pciid: 1814:0301 and 1814:0302
 Driver: Don''t use driver that ships with card, it didnt work with ndiswrapper. Use the close source driver from Ralink http://www.ralinktech.com. It compiles for 2.4 and 2.6 kernels.
 Other: The rt2x00 Open Source Project (http://rt2x00.serialmonkey.com) have now a driver - but realy beta.
 Other: The Ralink driver works great. It is not a plug and play, you need your kernel headers, the appropiate gcc (3.4) but when you can link it together and put it where it loads at startup, it works great. I am using WPA without any problem.

 Card: Linksys WMP54GX
 Chipset: Airgo networks Inc unknown device 0001
 pciid: 17cb:0001
 Driver (linksys): use the driver found on the linksys website at http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=application%2Fzip&blobheadervalue2=inline%3B+filename%3DWMP54GX_v10.zip&blobkey=id&blobtable=MungoBlobs&blobwhere=1129216876336&ssbinary=true

 Card: Linksys WPC11
 Chipset: Realtek RTL8180L
 pciid: 1186:3300
 Driver: Don''t use driver that ships with card. Use driver for RTL8180L from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 (Outdated) Also http://www.opendrivers.com/freedownload/211939/realtek-rtl8180l-wireless-driver-3.30.163.312-windows-download.html
 Other: See D-Link DWL-510 (the pci-id part). Works fine with 2.6 & kernel and ndiswrapper 0.8. also works with 2.4.29 Kernel and ndiswrapper 1.1

 Card: Linksys WPC11 v.4
 Chipset: Realtek RTL8180L
 pciid: 10ec:8180 (rev 20)
 Driver: Don''t use driver that ships with card. Use driver for RTL8180L for Windows XP from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 (Outdated) Also http://www.opendrivers.com/freedownload/211939/realtek-rtl8180l-wireless-driver-3.30.163.312-windows-download.html
 Other:The Realtek driver mentioned above works only with the 16KB stack kernels. I got mine for Fedora Core 3 from Linuxant.

 Card: Linksys WPC54G, 54mbps
 Chipset: Broadcom BCM94306
 Driver: ftp://ftp.linksys.com/pub/network/WPC54G_driver_utility_1.3.1.zip
 pciid: 14E4:4320
 Driver (Dell): http://ftp.us.dell.com/network/R76521na.EXE (use the file that ends in "j" if you live in Japan or "rw" for anywhere else)
 Other: Works with WEP and WPA with either CCMP/AES or TKIP ciphers.
 Driver (Linksys): ftp://ftp.linksys.com/pub/network/WPC54G_driver_utility_1.3.1.zip
 Other: Works without using any encryption.  Still trying to get it to work with WPA/TKIP.

 Card: Linksys WPC54G v2, 54Mbps
 Chipset: Texas Instruments ACX 111
 pciid: 104c:9066
 Driver: Linksys ftp://ftp.linksys.com/pub/network/wpc54gv2_driver_utility_v2.02.zip
 Other: linux-2.6.8-gentoo kernel, ndiswrapper 0.10.Kept having kernel panic (interrupt-related) upon module load until I set CONFIG_PCI_MSI=y (and unset CONFIG_4KSTACKS, just in case.) Also, used "ndiswrapper -i LSTINDS.INF" (NOT lsbcmnds.inf).  Works with 64 and 128-bit WEP. Sometimes need to repeat config info (and commit) repeatedly, else driver & card will ignore requested setup. Also works with Gentoo 2.6.9-r9, ndiswrapper 0.12 and drivers that came from CD. 
 Other: Working fine on Ubuntu Breezy Badger (kernel 2.6.12) using ndiswrapper 1.9 / ndiswrapper-utils 1.7 and lstinds.inf driver.
 Other: Ndiswrapper is not needed. In Ubuntu Dapper (and probably in other Linux distributions as well) this card is supported natively with the acx driver.  See http://ubuntuforums.org/showthread.php?t=75448

 Card: Linksys WPC54G v3, 54Mbps
 Chipset: Broadcom Corporation BCM4318 802.11/g Wireless LAN
 pciid: 14e4:4318
 Driver: ndiswrapper v1.3 with bcmwl5a.inf ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/ (Broadcom, 12/22/2004, v3.100.46.0)
 Other: linux-2.6.8 kernel, debian, card worked well
 Other: linux-2.6.14 kernel, debian, ndiswrapper 1.9, wpa_supplicant 0.4.7, driver ftp://ftp.linksys.com/international/drivers/WPC54G_driver_utility_v3.1.zip, works with WPA2

 Card: Linksys WPC54G v4, 54mbps
 Chipset: AirConn? IPROCOMM IPN 2220 (rev 01)
 pciid: 17fe:2220
 Driver: Linksys ftp://ftp.linksys.com/pub/network/WPC54G%20v4%20driver%20rev%201.22.1.2004.zip
 Used ndiswrapper -i WLINPDS.INF on Debian Sarge for the Linksys driver. Worked perfectly.
 Driver:IPN2220 ftp://ftp.rediris.es/sites/arklinux.org/arklinux/arklinux.org/apt/arklinux/dockyard/en/i586/RPMS.contrib/driver-ipn2220-2.10.03.2004-1ark.i586.rpm
 Other: Debian/Sarge 2.6.11, Ndhttp://ftp.us.dell.com/network/R140747.EXEiswrapper 1.1 with module asistant.Works with WEP 64bits and 128bits and WAP-PSK,other encription not tested

 Card: Linksys WPC54G v5, 54mbps
 Chipset: Marvell 88w8335
 pciid: 11ab:1faa
 Driver: http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1130276681921&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=0993481921B03
 This driver works with WPA (wpa supplicant - use "wext" instead of "ndiswrapper" as driver-parameter like this: "wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf -D wext -B") tested on a OpenSuse 10.3 System.
 Other: The ridiculous URL above appears to be the only way to get at the official driver, since there''s nothing obvious at the Linksys ftp site. Unpack WPC54Gv5.zip, then &lt;tt>ndiswrapper -i LSMVNDS.inf&lt;/tt>. I used FC3, kernel 2.6.12-1.1381_FC3 unmodified (despite the 4K page warning). There''s an UNIMPLEMENTED warning which looks serious, but from the mailing list archive can apparently be ignored. AP is Linksys 

 Card: Linksys WPC54G v7.1, 54mbps
 Chipset: Atheros AR5211
 pciid: 168C:001A
 Driver: Linksys http://www-uk.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=UK%2FLayout&cid=1129319258516&packedargs=sku%3D1165633412015&pagename=Linksys%2FCommon%2FVisitorWrapper
 Used ndiswrapper -i net5211.inf found in the /WPC54G-EU_v7_DRUT/Driver directory in the unzipped driver file.
 Other: Open Suse 10.2, kernel 2.6.18.2 WPA personal mode enabled. Other mode not tested. 
 WAG354G.
 Other: The above driver did not work for me, but this other driver (for a card with the same pciid) did: http://www.airnetusa.com/downloads/driver/DRXP_AWD_AWN154_v11.zip

 Card: Linksys WPC54GS SpeedBooster, 54mbps/125mbps
 Chipset: BCM94306
 pciid: 14e4:4320 (rev 03)
 Driver: Linksys ftp://ftp.linksys.com/pub/network/wpc54gs_driver_utility_v1.0.zip
 Other: Ndiswrapper 0.10rc1 Manual compile. Works fine. Also reports speed up to 125Mb/s. Suspend/Rsume also works great. Great card, hassle freee install.
 Other: Ndiswrapper 1.9 manual compile on SuSE 9.0, kernel 2.4.32 (ix86). Have found more recent versions of ndiswrapper would compile but fail to load the module with an unresolved symbol error. Works great with the driver mentioned above together with WRT54G router and wpa_supplicant 0.4.6 (rpm binary)., with WPA enabled ("WPA Enterprise"-mode). Still I was not successful to get the card to authenticate with the router set to "WPA2 Enterprise"-mode. For SuSE 9.0 you will need to manually add libhistory.so.5 and libreadline.so.5 to your system in order to meet the requirements for wpa_supplicant (e.g. extract them from the readline-5.0-1.2.i586.rpm )
 Driver: From Linksys website, wpc54gs_driver_utility_v2.1%2C1.zip, with version number 3.100.64 and a release date of 07/28/2005.  Sorry, no direct link is possible, start from the homepage and look for the download section.
 Other: Unzipped the download, and used the drivers from the "Driver/NT" directory, with command ndiswrapper -i LSBCMNDS.inf.  ndiswrapper version 1.8 on Unbuntu 6.06.  No problems on an unencrypted network.

 Card: Linksys WPC54GS  v2 SpeedBooster, 54mbps/125mbps &ndash; http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1115416827132&pagename=Linksys%2FCommon%2FVisitorWrapper
 Chipset: Broadcom BCM4318 Airforce One 54g 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318 (rev 02)
 Driver: Linksys Driver CD: /mnt/cdrom0/Driver/NT/LSBCMNDS.inf, bcmwl5.sys, LSBCMNDS.cat
 Other: Kernel: 2.6.15-1-586tsc, Ndiswrapper: 1.5-1 via Debian Etch, wpasupplicant: 0.4.9-1. Works fine, per WPA . Reports speed up to 125Mb/s.

 Card: Linksys WPC54GX v1 SRX, 108mbps &ndash; http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1115416827233&pagename=Linksys%2FCommon%2FVisitorWrapper
 pciid: 17cb:0001
 Chipset: Airgo Networks Inc Unknown device 0001 (rev 01)
 Driver: WinXP NETANI.INF  http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1115416827233&pagename=Linksys%2FCommon%2FVisitorWrapper
 Other: Ubuntu 6.10 using kernel 2.6.17-10-generic and ndiswrapper (installed with apt). Used installation instructions at http://ubuntuguide.org/wiki/Ubuntu_Edgy#How_to_install_Windows_Wireless_Drivers_.28Ndiswrapper.29

 Card: Linksys WPC54GX4 Notebook Adapter with SRX 400 v1.0, 802.11g, 240mbps
 pciid: 17cb:0002
 Chipset: Airgo Networks Inc Unknown device 0002 (rev 01)
 Driver: Linksys Windows XP driver. Install with "tmimo3p.inf" &ndash;  http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859951738&pagename=Linksys%2FCommon%2FVisitorWrapper
 Other: Gentoo (IA32 arch, kernel: 2.6.22-gentoo-r5), ndiswrapper v1.48_rc1 (via emerge), wpa_supplicant v0.5.7 (via emerge) using 802.11g, WPA2 + TKIP + preshared key encryption to a Linksys WRT54GX4 802.11g Wireless Router with SRX 400 that has it''s SSID hidden. Works well.

 Card: Linksys WUSB11v4, 802.11b, USB 1.1
 usbid: 13B1:000B
 Chipset: M4301A, made by Ali
 Driver: Linksys Windows XP driver from ftp://ftp.linksys.com/pub/network/WUSB11v4_08272004.exe (driver is not available through http://www.linksys.com/download/default.asp). Install with WUSB11v4.inf 
 Other: Works with snapshot of 2005-08-21.

 Card: Linksys WUSB11v2.5, 802.11b, USB 1.1
 usbid: 066b:2212
 Chipset: prism2 (Atmel?)
 Driver: Linksys Windows XP driver from ftp://ftp.linksys.com/pub/network/wusb11v25.zip. Install with lswlusb.inf 
 Other: Works without any problems on SUSE 10.1 - Linux 2.6.16.13.
 Note: FTP link above always failed with 426 Failure writing network stream. Alternate download location is http://members.driverguide.com/driver/detail.php?driverid=97867&action=summary. (I haven''t installed it yet, but I''ll update once I do.)

 Card: Linksys WUSB54Gv1, 802.11b/g, USB 2.0
 Chipset: Prism54
 usbid: 5041:2234
 Driver: Linksys Windows XP driver http://www.linksys.com/download/default.asp
 Other: Works smoothly, of course ;) - this is the device the USB extension was originally developed for. WEP is running, WPA is supported using wpa_supplicant 0.2.5. No problems with both 1.1 and 2.0 host controllers. As with many other USB devices, no success with 2.4 kernels so far. Try to use 2.6.7 or better. There is a native driver for Prism54 that is working on USB support. View its status at Prism54.org
 Other: Works with latest Windows Driver from linksys.com. No success with 2.4 kernels (even with 8k stack). Works with kernel 2.6.11 and 2.6.12. Works smoothly with 2.6.12 and ndiswrapper 1.14.
 Other: Driver from Linksys is old. Alternate driver for Sitecom WL-125 driver at http://www.sitecom.com/showdownload.php?id=1998 is newer version. With this, the card doesn''t disconnect. Tested with card with usbid 1915:2234.

 Card: Linksys WUSB54Gv4, 802.11b/g, USB 2.0
 Chipset: RT2500USB (RT2571F) (They just changed the chip and didn''t tell anybody. Be careful which version (v1/v2/v4) you buy!)
 usbid: 13b1:000d
 Driver 00: Ralink Driver, Open Source: http://rt2x00.serialmonkey.com/ - 2005-07-25 / Good alternative to ralinktech.com''s driver. Works WELL.
 Driver 0: Ralink driver: http://www.ralinktech.com/supp-1.htm - 2005-03-25 / Drv2.0.1.0, rt2500usb.inf & rt2500usb.sys Notes: ndiswrapper v1.2-rc1, kernel 2.6.11.7 (also works with grsec2 patch v2.1.5): works on both USB2.0 (load with modprobe ehci-hcd log2_irq_thresh=4 to avoid "usb X-Y: reset high speed USB device using ehci_hcd and address Z") and USB1.1 (UHCI (OHCI not tested (yet?))). WEP works with 64bit and 128bit keys. but bitrate is only 11Mbit/s Note: rename the configuration file for the adapter once you  installed the drivers (getting them extracted is quite a mess (WINE/Cedega) you need rt2500usb.*). "mv /etc/ndiswrapper/rt2500usb/148F\:2570.0.conf /etc/ndiswrapper/rt2500usb/13b1\:000d.0.conf'' should do the trick.
 Driver 1: Linksys Windows XP driver: http://www.linksys.com/download/default.asp Notes: ndiswrapper v1.1, kernel 2.6.11.7 vanilla: kernel-oops!  ndiswrapper v1.2-rc1 loads fine (EHCI loaded with modprobe ehci-hcd log2_irq_thresh=4) but oopses when unloading the module and the adapter is still plugged in (Kernel 2.6.11.7 vanilla). Yet transmission seems to fail completely (except increasing "Tx Invalid misc'' values nothing happens).
 Driver 2: older Linksys Windows XP driver: ftp://ftp.linksys.com/pub/network/WUSB54Gv4_20040703.exe Notes: ndiswrapper v1.2-rc1, kernel 2.6.11.7 (also works with grsec2 patch v2.1.5): seems to work, but only 11Mbit/s and without any encryption. no need to unplug the device before removing the ndiswrapper module. works on USB2.0, USB1.1 not tested (yet).
 Driver 3:There is a native driver for rt2x00 but it has no USB support yet. View its status at rt2x00.serialmonkey.com

 Card: Linksys WUSB54GR, Wireless-G USB Adapter with RangeBooster, 802.11g, USB 2.0
 Chipset: RT73
 usbid: 13b1:0023
 Driver: http://www.ralinktech.com/drivers/Linux/RT73_Linux_STA_Drv1.0.3.6.tar.gz
 Other: This thread helped me figure out how to install the driver: http://www.linuxquestions.org/questions/showthread.php?t=479867    Don''t rely just on the OP, you should scan the whole thread.

 Card: Linksys WUSB54GSv1, 802.11b/g, USB 2.0
 Chipset: Broadcom - BCM4320?????
 usbid: 13b1:000e
 Driver: For 32bit versions, follow instructions for v2 below, replacing the device id 13b1:0014 with 13b1:000e
 Driver: For 64bit versions: get the usb8023.sys and rndismp.sys from a Windows XP / Vista 64bit installation. Also make sure you have the latest SVN version (or 1.20+). If you use this in combination with the .inf file from the official drivers as found on the LinkSys Support-site, it all works (even WEP and WPA)

 Card: Linksys WUSB54GSv2, 802.11b/g, USB 2.0
 Chipset: Broadcom - BCM4320SKFBG
 usbid: 13b1:0014
 Driver: You can install this driver by either of the following two methods.
 *Method1: The driver for this RNDIS card doesn''t include two .sys files required (usb8023k.sys and rndismpk.sys or usb8023x.sys and rndismpx.sys), as they are part of Windows installation and don''t need to be installed in Windows. However, other drivers for different cards based on RNDIS include these .sys files. One is Belkin F5D7051uk at http://www.belkin.com/support/download/downloaddetails.asp?download=1871&lang=1. You can install this driver with BCMRNDIS.INF, then, copy sys files with "cp USB8023K.sys /etc/ndiswrapper/bcmrndis/usb8023k.sys; cp RNDISMPK.SYS /etc/ndiswrapper/bcmrndis/rndismpk.sys''. You then need to inform ndiswrapper that this driver, bcmrndis, should be used for usbid of WUSB54GSv2 (13b1:0014), by executing "ndiswrapper -d 13b1:0014 bcmrndis''
 *Method2: Used the inf file from the CD, and the .SYS files from usr5420 available at www.usr.com http://www.usr-emea.com/support/s-prod-template.asp?loc=unkg&prod=5420. Used snapshot from 13/02/2006, along with the usr system files that i had to install on a windows machine to extract. Then copied the wusb54gs.inf and wusb54gsv2.inf to the folder with the sys files - the wusb54gs.inf worked seamlessly with my device on the snapshot.!
 With 2.6.16 kernels and later, you also need to configure udev; see entry for USR5421 below for details.

 Card: Linksys WUSB54GSC, 802.11b/g, USB 2.0
 Chipset: Broadcom
 USBID: Vendor=13b1 ProdID=0026 (13b1:0026)
 Driver: Downloaded driver http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1154470123093&pagename=Linksys%2FCommon%2FVisitorWrapper here and install.  Copied the win files (usb8023.sys and rndismp.sys) from the F5D7051.exe http://www.belkin.com/support/download/downloaddetails.asp?download=1871&lang=1 download to the /etc/ndiswrapper/wusb54gsc/ folder.  Lastly, use the script detailed http://www.ubuntuforums.org/showthread.php?t=225206 here , modidifed with the correct USB ProdID (0026), to get the power working.  It''s in the section "Getting WUSB54GS to Work in Edgy and Feisty''  Also check out the thread http://www.linuxquestions.org/questions/showthread.php?p=2559643 here for why the script is needed and works.
 Other: With 2.6.16 and later kernels, RNDIS devices are not initialized (when device is plugged in, nothing happens). To get it going, you need to set the variable bConfigurationValue in sysfs. An easy way to do this is to add this: BUS==”usb”, SYSFS{idProduct}==”0026”, SYSFS{idVendor}==”13b1”, PROGRAM="/bin/sh -c "echo 1 > /sys/%p/device/bConfigurationValue''" to /etc/udev/rules.d/&lt;ruleFilename> file and restart udev. For FC6 &lt;ruleFilename> is 50-udev.rules.

 Card: Linksys WUSB54GPv1
 Chipset: Prism54
 USBID: Vendor=5041 ProdID=2235 (5041:2235)
 Driver: I got this working (with WPA-PSK CCMP/TKIP) effortlessly using the ndiswrapper/wpa_supplicant packages bundled on the Ubuntu 6.06 CD.  I used the Linksys WUSB54GPv4 1.02.00 driver release http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1115416827622&pagename=Linksys%2FCommon%2FVisitorWrapper here which also includes the WUSB54GPv1 drivers in their own folder.  I have not checked if this driver is the same as the one in the seperate WUSB54GPv1 driver release; I just know it works.  Also, i had to blacklist the islsm modules (www.prism54.org) that ship with Ubuntu.

 Card: Linksys WPC300N PCMCIA v1 (US Version)
 Laptop - Dell Latitude 600 Intel Mobile 700, 256mb
 Driver: bcmwl5.sys, Lsbcmnds.inf
 Drivers came off the installation CD that came with card
 Other: Kubuntu Gutsy (7.10), ndiswrapper version 1.43.  Kubuntu originally didn''t recognize the card, but after installing, it was recognized immediately and configured easily.

 Card: Linksys WPC300N PCMCIA V2
 NOTE: Afaik there is no V2, and the V1 (at leas in US is broadcom, above)
 Chipset: Atheros
 Driver: 2.00.13 Linksys European driver + Suse 10.1 WPA-PSK worked perfectly
 Other: Ubuntu 6.10 with Ndiswrapper 1.34 built from source and Driver ver: 1.0.0.16 worked perfectly

 Card: Logilink WL0006
 Chipset: Realtek 8187B
 Driver: WinXP ftp://61.56.69.18/cn/wlan/RTL8187B_driver_only.zip
 Other: working with Ndiswrapper 1.4.7 (rpm package from OpenSuse 10.3)

 Card: Longshine LCS-8531-R PCMCIA
 Chipset: RTL8180L (rev 20)
 pciid: 10ec:8180
 Driver: WinXP Build 154 ftp://202.65.194.18/cn/wlan/rtl8180l/winxp-8180(154).zip (build 166 works too)
 Other: Debian Testing, Ndiswrapper 0.10. Didn''t work with realtek driver build 169 or 170.

 Card: Longshine LCS-8531G2 PCMCIA (54Mbps 802.11g)
 Chipset: Texas Instruments tnet1130
 pciid: 104c:9066
 Driver: tnet1130.sys (Texas Instruments,03/10/2004,6.0.0.18) (from CD or Longshine web site)
 Other: RedHat 8.0, kernel 2.4.20-28.8, Ndiswrapper 0.10, needs Wireless-Tools 27

 Card: Longshine LCS-8131G2 USB
 Chipset: Zydas 1211
 pciid: 0ace:1211
 Driver: ZD1211U.sys from http://www.longshine.de/anonymousFTP/8131g+.rar longshine.de
 Other: Ndiswrapper version 1.16 compiled with kernel 2.6.15-1 from Debian etch
 Other: wpasupplicant (Debian etch; use "-Dwext'' instead of "-Dndiswrapper'') works with it, too.

 Card: LG LWG5400N (PCMCIA) and LWG5400P (PCI)
 Chipset: TI ACX111
 pciid: 104c:9066
 Driver: tnet1130.sys, tnet1130.inf, fwrad16.bin, fwrad17.bin (all from install CD)
 Other: Fedora Core 3, kernel 2.6.9, ndiswrapper-0.8

 Card: LG LWG5410N PCI (54Mbps 802.11b/g)
 Chipset: Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03)
 pciid: 01:07.0
 Driver: Mrv8000c.INF (from the CD, WinXP driver)
 Other: Fedora Core 4, Kernel 2.6.14-1.1644_FC4, ndiswrapper-1.5-0.lvn.1.4, Wireless-Tools 28

 Card: LG LWG5400N (PCMCIA) and LWG5400P (PCI)
 Chipset: TI ACX111
 pciid: 104c:9066
 Driver: tnet1130.sys, tnet1130.inf, fwrad16.bin, fwrad17.bin (all from install CD)
 Other: Fedora Core 3, kernel 2.6.9, ndiswrapper-0.8

 Card: Logitec LAN-WAG/U2 (USB 2.0)
 Chipset: Atheros 5523
 usbid: 0789:0109 Logitec Corp.
 Driver: ar5523.bin  wagu2.inf  wagu2.sys (all from install CD)
 Distro: SuSE 9.3
 Kernel: 2.6.11.4-21.11-default
 Other: works well with ndiswrapper-1.41

 Card: Marvell (Integrated on ASUS P5AD2 motherboard)
 Chipset: Marvell unknown device  
 pciid: 11ab:1fa7 Windows
 Driver: See CD of motherboard. Used Win2K drivers. Renamed MRV8KA50.sys to mrv8ka51.sys.
 Other:: Ndiswrapper 1.4 on SuSE 9.3. Recompiled kernel 2.6.11.4-20a without smp.

 Card: Marvell 88E8053
 Chipset: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller
 pciid: 11ab:4362
 Driver: yk51x86.inf (search for keyword 88E8053 at http://www.marvell.com/drivers/search.do and download XP driver)
 Other: Tested with ndiswrapper version 1.42 (svn revision 2315) and kernel 2.6.21-smp

 Card: Marvell 88W8360
 Chipset: Marvell 88W8360 TopDOG USB
 usbid: 1286:2006 "Marvell TOPDOG 802.11n WLAN Client Adaptors - USB"
 usbid: 1799:8051 "Belkin N1 Wireless USB Network Adapter"
 usbid: 13B1:0029 "Linksys Wireless-N USB Network Adapter"
 usbid: 0846:7100 "Netgear WN121T Wireless USB 2.0 Adapter"
 usbid: 07D1:3B11 "D-Link Wireless N USB Adapter DWA-130"
 usbid: 07D1:3B10 "D-Link RangeBooster N USB Adapter"
 usbid: 0B05:172A "ASUS 802.11n Network Adapter"
 usbid: 0B05:172B "ASUS 802.11n Network Adapter"
 usbid: 0411:00CA "Buffalo 802.11n Network Adapter"
 Driver: Mrv8360.inf / Mrv8360.sys, bundled Windows XP drivers on CD
 Other: (unknown vendor) Works perfectly with ndiswrapper 1.2+, tested from source with kernel 2.6.20 (vanilla) on Gentoo 2006.1; FWIW it also works with Project Evil on the BSD''s

 Card: Marvell 88W8335 - Libertas 802.11b/g Wireless (rev 03) 
 Chipset: Marvell 88W8335
 pciid: 11ab:1faa (rev 03)
 Driver: http://www.encore-usa.com/download/driver/ENLWI-G_Driver_Utility_98SE-ME-2000-XP.zip. Used WinXP driver.
 Other: http://www.encore-usa.com/product_item.php?region=us&bid=2&pgid=4&pid=15 (product profile)
 Other: Ndiswrapper 1.34, Recompiled kernel 2.6.18.3, without smp, with kernel debug and without 4kstacks. Debian Testing "Etch". WPA not tested.

 Card: MEDION MD40900
 Chipset: ISL 3880IK (Prism Frisbee?!?)
 usbid: 0cde:0006
 Driver: WlanUIG.inf and WlanUIG.sys, from supplied cd (xp installation)
 Other: SuSE 9.2 (kernel 2.6.8) - use ndiswrapper 0.11
 Other: Debian Sid (kernel 2.6.9) / ndiswrapper 0.12-1

 Card: MEDION MD41300 built-in ISL3890
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette (rev 01)
 pciid: 1260:3890 (rev 01)
 Driver: Windows 2000 Driver from SMC archive (http://www.smc.com/files/AV%5CDR_2802wV.2_WHQL.zip)
 Other: Works with WPA-PSK on Ubuntu 5.04, kernel 2.6.10-5-386, ndiswrapper-utils package (0.12+1.0rc2-1), wpasupplicant package (0.3.8-1). Instructions from ndiswrapper-site and ubuntu wpa-wiki.

 Card: Mentor WLG-PCI
 Chipset: Galileo Technology Ltd.: Unknown device 1faa (Branded as Marvell on Chip and Driver)
 pciid: 11ab:1faa (rev 03)
 Driver: Windows 2000 Driver on included CD
 Other: Mandrake 10.0, Kernel 2.6.3-7mdk, ndiswrapper 1.2, Works fine once associated with A/P, A/P association seems to be a bit hit and miss.

 Card: Mentor WLG-PCI/II (802.11b/g)
 Chipset: Ethernet controller: Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03)
 pciid: 11ab:1faa (rev 03)
 Driver: mrv8335 (http://www.marvell.com/drivers/driverDisplay.do?dId=122&pId=3)
 Other: The drivers on the CD provided with the card contains the mrv8000c drivers, but these drivers doesn''t work fine for me. You can download the "Libertas CB-35P/MB-35P driver" on Marvell''s site (link above). They work well with ndiswrapper 1.4 on a 2.6.13-gentoo-r3 kernel. You can also check this document (in French): http://perso.wanadoo.fr/kdntl/articles/index.php,id-10.html

 Card: Mentor 802.11g Wireless LAN USB Adapter (WLG-USB/II)
 usbid: ID 0457:0163
 lsusb: Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corp.
 Driver: sis163u.inf, sis163u.sys
 Distribution: Fedora Core 4 - kernel 2.6.11-1.1369_FC4
 Installation: just follow README

 Card: Mercury/Kobian KOB WL445 (802.11b) http://www.mercury-pc.com/product-detail.php?link=p-networking&subtitle=Networking%20Products&productid=343 (product profile)
 Chipset: Realtek RTL8180L (8180)
 lspci: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)
 pciid: 10ec:8180 (rev 20)
 Driver: Realtek Windows 2000 driver v.1.73 http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=2002111&famid=2002111&series=2002121&Software=True (download page)
 Distribution: Ubuntu 5.10 (Breezy Badger) kernel version 2.6.12-9-386
 Other: WEP security works fine.

 Card: Microcom TravelCard 11g
 Chipset: Texas Instruments ACX111
 pciid: 104c:9066 subsystem id: 13d1:ab80
 Driver: tnet1130.inf tnet1130.sys fwrad16.bin (Windows XP driver version 6.0.0.18) from http://www.microcom-ce.com/download.php?doid=442
 Other: Fedora Core 3, kernel-2.6.12-1.1381_FC3 rebuilt with 16k stacks, ndiswrapper 1.2+, also works with open source acx driver from http://acx100.sf.net , although much slower

 Card: Microsoft MN-120 100Mbps PCMCIA ethernet card
 Chipset: 
 pciid: 0000:05:00.0 0200: 1414:0001 (rev 11) Ehternet controller: Microsoft Corportation: Unknown device 0001 (rev 11). 
 Driver-and-Installation:1. Copy /windows/inf/MN120.inf, system/MN120-50.sys system/MN120-51.sys system/MN120.cat to a pwd. 2. cp MN120-50.sys to MN120-51.sys. This is A trick to make sure MN120-50.sys is use instead of MN120-51.sys. 3. ndiswrapper -i MN120.inf; ndiswrapper -l; dmesg; modprobe ndiswrapper; ifconfig wlan0 up; pump -i wlan0. Vala. Thanks this wonderful tool ndiswrapper for making the MN120 works under linux (DSL 3.1RC3).  

 Card: Microsoft MN-710 802.11g USB 2.0 Adapter
 Usbid: 045e:00c2
 Driver: mn710.inf, mn710-50.sys, mn710-51.sys
 Other: Fedora Core 6, ndiswrapper versions: utils: 1.9, driver: 1.39
 Installation: run ndiswrapper -i mn710.inf, this installs the .inf file to /etc/ndiswrapper/mn710 but does not move the .sys files.  Copy both .sys files to this location manually.  Next, type "ndiswrapper -l" to verify that the mn710 driver is installed and the device is present.  At this point, plug in (or re-plug in) the USB connector to the device.  You should see the "Power" and "Wireless" lights come on.  Follow the rest of the directions starting from the "Configure Interface" section onwards in the ndiswrapper installation guide to complete the install.

 Card: Microsoft MN-720 80211g 54Mbps PCMCIA card - Broadcom Corporation BCM43xx, 80211b/g
 Chipset: Broadcom 43xG (maybe a 4306?)
 pciid: 14e4:4325 (rev 02) subsystem 1414:0003 Distro-specific: Gentoo 2.6.11-r4, ndiswrapper 1.1 ebuild (older:  Gentoo 2.6.7-r11, Ndiswrapper 0.10 ebuild) (The older build, as of 8-22-2004, was not in portage tree - i''m still hosting it at http://68.100.92.87:8080/ebuilds/ndiswrapper-0.10.ebuild and http://68.100.92.87:8080/ebuilds/files/ndiswrapper-0.10-modules.d - honestly, you shouldn''t need to use this older build anymore, though)
 Driver-and-Installation 
 *Option 1: Use a homegrown driver INF file that I have created, along with the same SYS file from above.  It has the benefit that you will not have to create any symlinks.  I''m hosting it for your convenience at http://ankhcraft.com/drivers/mn720-ankh.zip Please note that I do not provide any warranty for this INF file that I have created, express or implied. All I can say is that it works for me, and I''ve used this card heavily (with this driver).  
 *Option 2: Use Dell''s TrueMobile? 1300 driver. I''m hosting it for your convenience at http://ankhcraft.com/drivers/bcmwl5.zip Please note that the pciids are not the same for this card, so, following driver installation into ndiswrapper, you''ll need to create some symlinks, like so (as root): ln -s 14e4:4320:1028:0002.conf /etc/ndiswrapper/14e4:4325:1414:0003.conf ln -s 14e4:4325:1414:0003.conf /etc/ndiswrapper/14e4:4325.conf 
 *Option 3: Use Microsoft''s driver from the cd (or optionally from http://www.network-drivers.com/drivers/141/141400.htm) Please be warned that this driver does not play nice with Linux hosted NDIS emulation wrappers in general.  In order to get this driver work with ndiswrapper specifically, you must make sure you do NOT have the card plugged into the cardbus slot when you insert the ndiswrapper module. You''ll get a kernel panic if you do, and then you''re toast. Plug the card in afterward. After this, it works wonderfully. Also, it is worth mentioning that the Microsoft driver is known to be unstable when used with LinuxAnt''s driverloader. You may experience random system lockups, even though you may avoid the kernel panic mentioned above.  I would suggest that you stay away from this driver under Linux.  joe@ankhcraft.com - ankhcraft

 Card: Minitar MN54GCB
 Chipset: Broadcom Corporation BCM4306 802.11g (rev 3)
 pciid: 14e4:4320 (rev 3)
 Driver: Minitar http://www.minitar.com/downloads/4.1.17.26.zip
 Other: Mandrake 10.1 (kernel 2.6.8.1-12mdk) and ndiswrapper 0.9-1mdk (on the 10.1 DVD). All appears to work.

 Card: Motorola WN825G (V2) FCC ID: ACQWN825GV2
 pciid: 14E4:4320, lspci -vb string is "Broadcom Corporation BCM 94306 802.11g (rev. 03)" Windows
 *Driver: http://www.motorola.com/broadband/networking
 Other: This card works with ndiswrapper 0.9+ using the drivers obtainable at Motorola.

 Card: Motorola WN825G (V3) FCC ID: ACQWN825GV3
 pciid: 14E4:4320, lspci -vb string is "Broadcom Corporation: Unknown Device 4320 (rev 3)" Windoze
 Driver: ./Motorola Utility Installer/Win/bcmwl5.{inf,sys}
 Other: This card works with ndiswrapper 1.1 and 1.5 using supplied drivers on CDROM, though I''m sure drivers can be downloaded from Motorola&reg; at http://www.motorola.com/broadband/networking.

 Card: Motorola WPCI810G PCI Adapter
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 14E4:4320 Windows
 Driver: http://broadband.motorola.com/consumers/products/WPCI810g/downloads/WN-WPCI-Web-Update-v1.1.exe
 Other: This card works with ndiswrapper 0.12 using the "bcmwl5.inf" driver obtainable at Motorola above.

 Card: MSI CB54G PcCard Adapter, 802.11g
 Chipset: Broadcom BCM4306 (?) manfid: 02d0:0406 Windows
 Driver: http://www.msi.com.tw/ (look for ms68bm.inf and ms68bm.sys) Divers:: jec/04-apr-2005 : FedoraCore3, 4k stacks, driver loads OK.  Tests::Connecting to AP is fine. Getting DHCP address also. Changinf this site with my WiFi access! Nice.

 Card: MSI PC54G PCI Adapter
 Chipset: Broadcom BCM4306
 pciid: xxxx:xxxx Windows
 Driver: http://www.msi.com.tw/ (look for ms68bm.inf and ms68bm.sys)
 Other:: Works with WEP. Ad-hoc and managed OK.

 Card: MSI PC54G2 PCI Adapter
 Chipset: RaLink RT2500/RT2560
 pciid: 1814:0201 Windows
 Driver: http://www.ralinktech.com/
 Other:: Works with WEP and WPA with TKIP cipher (as it says, untested yet).

 Card: MSI (Micro Star International) UB54G USB 2.0 Adapter
 Chipset: Unknown(?Prism2?)
 usbid: 0db0:6826 Windows
 Driver: http://us-download.msi.com.tw/support/dvr_exe/cmu_dvr/MSI_WLAN_Software_V4.1.19.29.zip (look for PRISMA02.inf and PRISMA02.sys) - Package version: 4.1.19.29; Driver version: 1.0.5.0 (MS6826)
 Other:: Kernel - 2.6.11-kanotix-7; Installed ndis drivers: prisma02

 Card: MSI (Micro Star International) RAlink RT2500 Cardbus/mini-PCI integrated on MSI Megabook S271 laptop 64 bit (http://www.msi.com.tw/program/products/notebook/nb/pro_nb_selling.php?UID=622)
 Chipset: RaLink RT2500 (aka: MSI 6355B)
 pciid: 1814:0201 Windows
 Driver: http://www.ralink.com.tw/drivers/Windows/IS_AP_STA_6x_D-1.1.2.0_2500_D-3.2.0.0_RU-1.2.5.0_AU_1.1.3.0_081606_0.0.5.0.exe
 Other:: Fedora Core 6 test 2 64 bit Kernel - 2.6.17-1.2517.fc6 #1 SMP X86_64; Run the driver in windows and during install copy the directory "C:\Program Files\RALINK\RT6x Wireless LAN Card\Installer\WINX64" to your linux machine. WPA-PSK with TKIP works fine with the use of wpa_supplicant (v. 0.4.9) and ndiswrapper (v. 1.23).

 Card: Masim FWC-524PC
 Chipset: Colorado Instruments ACX111 chipset

 Card: Netgear MA101 rev A USB Wireless Adapter
 Card: Netgear MA101 rev B USB Wireless Adapter (atmel chipset)
 Card: Netgear MA111v1 802.11b Wireless USB2.0 Adapter
 Chipset: Prism2/2.5/3
 usbid: 0846:4110 Distribution: Debian sarge, kernel 2.6.8.1, ndiswrapper 0.12rc3
 Driver: &lt;a href="ftp://downloads.Netgear.com/files/ma111_CD_v2.0.zip">v2.0&lt;/a> from the Netgear website. Version: Netgear,08/11/2003, 3.0.8 
 Other: Works well with my ad-hoc WLAN setup.

 Card: Netgear MA111v2 802.11b Wireless USB Adapter
 Chipset: Sis162u
 usbid: 0846:4230
 Driver: sis162u driver from http://www.sis.com
 Other: Works with WEP, WPA+TKIP and WPA+AES. Tested with version ndiswrapper 1.4

 Card: Netgear MA111v2 802.11b WIRELESS USB ADAPTER
 See NetgearMA111v2UsbHowTo   in order to add your comments
 Chipset: sis162u
 usbid: 0846:4230
 Driver: XP MA111v2.inf original from Netgear site (all files stored in the folder)
 works with NDISWRAPPER from version 1.10 on kernel 2.6.12-9-386 and 2.6.12-10-386, see the link below (italian ubuntu wiki)
 http://wiki.ubuntu-it.org/InstallareAdapterWirelessUsbConNdiswrapper 
 works also with WEP

 Card: Netgear MA311 802.11b Wireless PCI Adapter
 Chipset: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
 pciid: 1260:3873
 Driver: Netgear driver version 2.5 (Windows XP certified), 12/20/2002, from http://www.Netgear.com
 Other: Works well on my system: Managed Mode, 128 bit WEP key, shared key authentication. TCP throughput is 4Mb/s.

 Card: Netgear MA511 PCMCIA Device (Realtek 8180L chipset)
 Card: Netgear MA521
 Chipset: RTL8180 FCC_ID: PY3MA521D
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?software=True&compamodel=RTL8180L RTL8180L - Use the ndis5x-8180(xxx).zip driver.  (NOT Netgear DRIVER! Netgear DRIVER UNSTABLE!!  &ndash; Seconded: The Netgear driver caused my machine to drop interrupts)
 Other: Works well even with DHCP on SUSE 9.0 Pro.  128 bit wep, managed mode. Will be trying WPA/PEAP/MSCHAP v 2 sometime later on.  Check http://hastingswireless.homeip.net/index.php?page=articles&number=2004.11.22 for information.  Ubuntu Hoary: Working with Ndiswrapper 1.1 - see http://www.ubuntulinux.org/wiki/SetupNdiswrapperHowto.
 Driver: ndis5x-8180(173).zip (DriverVer = 10/07/2004,5.173.1007.2004) from http://www.realtec.com.tw.
 Other: works on OpenSuSE 10.2, even with WPA_supplicant, PSK.

 Card: Netgear WG111 - 802.11g Wireless USB2.0 Adapter
 Chipset: Prism54 (Intersil 3886 and NetChip NET2280)
 usbid: 0846:4220
 Driver: Netgear windows driver Version: Netgear, Inc.,03/03/2004, 1.0.8.4 from http://www.Netgear.com
 Other: Works well. To get the driver, use cabextract on the .exe, then unshield on the data1.cab. WPA-PSK TKIP worked with wpa-supplicant 0.2.4. Used kernel SuSE 2.6.5-7.104-default. The driver locked the machine when connected to an OHCI controller, but worked fine with EHCI, on a SiS 650 chipset. TCP throughput was apx 7Mbps, which is low, but CPU usage was not maxed out as it is under windows XP on test machine. ndiswrapper is CVS top of tree from 23rd August 2004. There is a native driver for Prism54 that is working on USB support. View its status at Prism54.org As same as you read above, but I use Fedora 3 with Kernel 2.6.11-14.  Use ndiswrapper version 1.1 from 5rd March 2005. I work with beta-driver from Netgear (WG111 SW1-2 Beta 13) in managed mode with no encryption. Encryction (WEP) doesn''t work on my machine (Gericom X5 Force) yet, but I am still working on it. Try to configure via system-config-network (the fedora gui) with hotplugd started, so you can plug in and work. Attention!!! don''t activate the item "active on boot" because hotplug doesn''t run at boot-time.

 Card: Netgear WG311v1
 Driver: v1.5 http://kbserver.Netgear.com/products/WG311v1.asp (I downloaded the windows drivers and installed them, then I extracted the netwg311.inf and the wg311nd5.sys files from the Program Files/Netgear directory)
 pciid: 168c:0013
 OS: Damn Small Linux 3.2 Kernel 2.4.26
 Other: Using ndiswrapper v1.8
 Other: WEP works just fine - I used the Ndiswrapper tool in the DSL panel using the following settings: directory = whatever directory you put the .inf and .sys files in, device = ath0, sid = whatever the name of your network is, key = whatever your WEP key is (it''s the long hexidecimal one, not the user define password.)

 Card: Netgear WG111v2 - 802.11g Wireless USB2.0 Adapter
 Chipset: Prism54 (Intersil 3886 and NetChip NET2280) or
 Chipset: ? (Intersil 3887 without NetChip NET2280) http://yoshiyo.ath.cx/seb/images/wg111_4.jpeg
 usbid: 0846:4240 (both Chipsets !)
 Driver: Netgear windows driver Version: Netgear, Inc.,10/05/2004, 2.1 from http://www.Netgear.com or shipped with the setup CD. To get the driver, unzip it. The ndis drivers are in the ndis directory. Used kernel  Running Slackware v10.1 (kernel 2.6.10) ndiswrapper ver 1.1rc3 . There is a native driver for Prism54 that is working on USB support. View its status at http://www.prism54.org Prism54.org
 Other: With the driver for Sitecom WL-142, this device supports WPA2, keeps the device "alive" (with driver from Netgear, device stops working after a while) and correct some connection problem : http://www.sitecom.com/showdownload.php?id=1928.  Note that the device ID for Sitecom is different, so you need to create alias for it for WG111, e.g., with "ndiswrapper -d 0846:4240 wlanuig'', after which "ndiswrapper -l'' should show "hardware present''.
 Other: Works nearly well (several daily crashes in Summer 2005).
 Distro-specific: Debian Sarge 2.6.8.1, Ndiswrapper 0.10 Distro-specific: Debian Sid      2.6.8.X, Ndiswrapper 0.12+1.0rc2-1, without rfmon
 Other project without ndiswrapper : http://jbnote.free.fr/prism54usb/ (seems incomplete in january 2006 - not supporting WEP or WPA).

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 usbid: 0846:4240 Distro-specific: Ubuntu 4.10 "The Warty Warthog"
 Driver: Netgear windows driver Version: Netgear, Inc.,06/04/2004, 3.0.18.201 shipped with the setup CD
 Other: "ndiswrapper -l" produces "hardware not present" for the "netwg111" driver, but the adapter works anyway

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 usbid: 0846:4240 Distro: Gentoo 2005.1, kernel 2.6.12-r6
 Driver: Windows XP driver from Windows Update / preinstalled?, Version: 3.0.18.201.  Taken from Windows directory (XP full pathname: right-click Device Manager''s Netgear icon, Properties, Driver details)
 Other: ndiswrapper 1.5.  athlon-xp, (preempt=yes,smp=yes). Reboot was necessary to get lights a-blinkin.  Logging claimed modprobe error -22 until after reboot.  Currently misconfigured with setting tx_power failed (80000005) but hope to resolve.

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 usbid: 0846:6a00
 Distro-specific: FEDORA CORE 5 (4K kernel stack size), Ndiswrapper 1.33 
 Driver: Netgear windows driver Version: Netgear, Inc.,3/16/2006, 5.1213.06.0316 downloadable from Netgear site (wg111v2_1_3_0 , winme driver)
 Other: WEP work properly

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter (made in Taiwan)
 Chipset: Realtek RTL8187
 usbid: 0846:6a00
 Distro: Ubuntu 6.06 LTS, kernel 2.6.15-25
 Driver: (BAD) Realtek RTL8187L Win98SE/WinME driver v 1.221 from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=RTL8187 - DriverVer 5.1221.0412.2006. Uses name netrtuw.inf. This works for a while, but after ~5 minutes of ssh/file copy traffic, the machine hung and had to be rebooted (reproducibly).
 Driver: (BAD) Netgear wg111v2 1.40 (?) from http://kbserver.Netgear.com/release_notes/D102948.asp (labeled as 2.00 on http://kbserver.Netgear.com/products/wg111v2.asp) - DriverVer 5.1213.06.0327. Ndiswrapper will load this driver successfully and find the device, but iwlist scans will fail and the device won''t associate.
 Other: MUST rmmod, or blacklist kernel driver r8187 (in /etc/modprobe.d/blacklist) - it will claim the device before ndiswrapper gets a chance. The r8187 driver will associate with an AP and appear to work, but won''t actually transmit any data.

 Card: Netgear WG111v2 
 Chipset: RTL8187
 usbid:  ID 0846:6a00 Netgear, Inc. WG111 WiFi (v2)
 encryption: using WEP- 128bit
 Driver: 04/04/2006,5.1221.0412.2006 (copied from netrtuw.inf);  Realtek drivers v1221.  (these are no longer on the realtek website google them);  filename: rtlsetup-8187(1221)(0412).zip WIN98 folder;  url: http://www.majorgeeks.com (this is where I got it)
 Other: The XP drivers did not work in this package, but the WIN98 ones did.  In my experience, any driver for this adapter will load fine in ndiswrapper, but so far this is the only one that I got to find my AP.  Other drivers even detected other AP''s, but not mine (which was closer than the detected ones).  I also could not set the ESSID with other drivers. This one has neither of those problems.  

 Card Netgear WG111v2 Wireless USB Adapter
 Chipset: Realtek
 usbid: 0846:6a00 Netgear, Inc. WG111 WiFi (v2)
 Kernel: 2.6.20-16-generic This kernel comes with ndiswrapper module in place so I had to delete it. You can find the module with "locate ndiswrapper.ko''
 Distro: Ubuntu Feisty Fawn
 Driver download from: http://kbserver.Netgear.com/release_notes/d103125.asp
 Driver link: ftp://downloads.Netgear.com/files/wg111v2_3_3_0_setup.zip
 Installation: Used unzip to extract the setup program and then wine (NOTE: set winecfg | win98) to install the utilities that places the driver into ~.wine/drive_c/Programfiler/Netgear/WG111v2/Driver/Win98Me . Setting wine to win98 gives me win98 drivers. I tried the winXP drivers without success.
 Driver version: driver net111v2 (Netgear Inc.,02/07/2007,5.1283.0207.2007)
 WINXP driver does not work although it installs fine and also discovers some networks while scanning with "iwlist scan''. 
 ndiswrapper version: Installed ndiswrapper from svn sources, revision 2427. Older versions of this driver did crash my system and freeze it completely when unloading the ndiswrapper module or when removing the USB wireless adapter. New version does not crash my system.

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 Chipset: some Prism54 variant
 usbid: 0846:4240 Distro: Gentoo 2006.0, kernel 2.6.16-r1
 Driver: Windows XP driver from install CD, same as http://kbserver.Netgear.com/support_details.asp?dnldID=843, version 3.0.18.201.  
 Other: ndiswrapper snapshot as of 6th April 2006 (earlier versions don''t work reliably with SMP). Athlon 64 x2 in 32-bit mode (preempt=yes,smp=yes). Label says WG111v2, but it''s a WG111v1 as far as the Netgear website is concerned (the "v2" driver is presumably for the version with usbid 0846:6a00). Initialisation occasionally fails for no reason.

 Card: Netgear WG111T
 Chipset: Atheros USB
 encryption: WPA-PSK (TKIP)
 usbid: 1385:4250
 Driver: Netgear windows driver Version: 21/06/2005, 1.2 from http://www.Netgear.de/download/WG111T/WG111T_GRV1.2.zip
 Other: This driver comes with two sets of .inf and .sys files: athfmwdl and wg111t. Both of these must be installed with their *.inf files.

 Card: Netgear WG111T
 Chipset: Atheros USB
 encryption: WPA-PSK (TKIP)
 usbid: 1385:4251
 Driver: Windows driver from Netgear website
 Other: Both athfmwdl.inf and netwg11t.inf installed with ndiswrapper version 1.23 or later as there is a bug in previous versions of ndiswrapper (per the changelog).  This bug caused me hours of frustration using ndiswrapper v1.22 (Ubuntu Edgy).  If using vista compatible drivers (e.g. version 2.1) you will need to use wine (tested with version 0.9.49) to extract drivers and install netwg11t.inf from the Driver directory (only need one .inf) within "~/.wine/drive_c/Program\ Files/NETGEAR/WG111T".  Version 2.1 also allows WPA2 to work.

 Card: Netgear WG111U
 Chipset: Atheros USB
 usbid: 0846:4301
 Driver: Netgear windows driver Version: 10/09/2004,1.0.0.114 from http://www.Netgear.com
 Other: This driver comes with two sets of .inf and .sys files: athfmwdl and wg111u. Both of these must be installed with their .inf files.

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 Chipset: Realtek Semiconductor Corp. RTL8187L
 usbid: 0846:6a00 Distro-specific: Debian "sid"
 Driver: realtek-driver for Windows 98SE/ME from http://www.realtek.com.tw/ look for RTL8187L or take Win-ME-driver from 1.4.0 driver from Netgear
 Other: Distro: Kanotix, kernel Linux version 2.6.17.6, ndiswrapper utils version: 1.8 ndiswrapper driver version: 1.21. Some XP/2K drivers could see ESSID but didn''t transfer bytes, others did not even scan ESSID of AP. With ME-driver it seems to work quite well.

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 usbid: 0846:6a00 Distro-specific: Debian "sid"
 Driver: Netgear windows driver Version: Netgear Inc.,04/21/2005,5.112.05.0421 from directory Driver/WINXP/ on the setup CD
 Other: tested debian-kernel 2.6.8 with ndiswrapper 1.1 and vanilla-kernel 2.6.12.3 with ndiswrapper 1.2 - everything works fine as far as i can tell.

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 usbid: 0846:6a00
 Driver: Netgear windows driver Version: Netgear Inc.,04/21/2005,5.112.05.0421 from directory Driver/WINXP/ on the setup CD
 Distro-specific: SuSE 10.0
 Other: tested SuSE Kernel 2.6.13-15.11 with ndiswrapper 1.21 - 128bit WEP and data transfer work fine. Ndiswapper 1.17 and previous kernel did not work (flaky operation + kernel oops). 

 Card: Netgear WG111v2 802.11g Wireless USB2.0 Adapter
 Chipset: Realtek Semiconductor Corp. RTL8187L
 usbid: 0846:6a00
 Driver: Realtek Windows XP drivers Version: Realtek Semiconductor Corp.,05/04/2005,5.112.05.0504 from http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=RTL8187 (2.00 2005/05/31)
 Other: Extract ZIP file and install driver in WINXP directory. Kernel 2.6.12.6 with WE 18 and ndiswrapper 1.2/1.4 &rArr; 128 bit WEP works perfectly, but WPA-PSK TKIP seems not to work with current wpa_supplicant version

 Card: Netgear WG111NA 802.11g Wireless USB2.0 Adapter
 Chipset: ?
 usbid: 0846:4240
 Driver: Netgear windows driver Version: 06/04/2004, 3.0.18.201 from distribution disk Distribution: Fedora Core 3, kernel 2.6.10-1.766_FC3.stk16 built by linuxant Version of Ndiswrapper: 1.1rc3
 Other: The outside packaging has the label WG111NA, but the label on the shell of the device has "FCC ID: PY3WG111V2".  Maybe the chipset is same as other WG111 on this list, how to confirm?.  I''ve experienced a system lockup when removing the device from the usb port or when "deactivating'' the interface in the Fedora internet config tool; I have not yet isolated the problem because system behaves OK if it is shutdown before removing the device (and I''m lazy and complacent).  This usb card did not run at all with ndiswrapper 1.0.

 Card: Netgear WG121 Wireless USB2.0 Adapter
 Chipset: Prism54 (I don''t know more)
 usbid: 0846:4200
 Driver: WG121 Software Version 2.0, Netgear Inc.,03/09/2004, from http://www.Netgear.com
 Other: Seems to work well. I had to upload the new firmware by running the installation on WinXP, but now it works. If anyone knows another way, please edit this. I used the drivers in the ndis5-directory of the unzipped download.

 Card: Netgear WG311 v2 (TI ACX 111 Chipset)
 Chipset: TEXAS INSTRUMENTS ACX 111 54Mbps Wireless Interface
 pciid: 0000:00:0b.0
 Driver: acx_pci from acx100.sf.net w/o enc or NDISwrapper

 Card: Netgear WG311 v3 (Marvell 88w8335 Libertas)
 Chipset: Marvell 88w8335 Libertas 54Mbps Wireless Interface
 pciid: 11ab:1faa
 Driver: copied from http://kbserver.Netgear.com/products/WG311v3.asp initial Release 6.20 MB    May 16,
 Driver: Copied WG311v3.INF and WG311v3XP.sys from Netgear CD to local ad hoc directory and ran ndiswrapper 1.2 there. Please see hint at http://linuxcompatible.org/Netgear_WG311v3_WLAN_PCI_Card_with_Debian_Linux_Testing_t33271.html
 Driver: WG311v3.inf (XP) from Netgear-HP or CD (date: 2005-03-10) with ndiswrapper-1.33 on gentoo-2.6.18-r6. WPA/PSK with wpa_supplicant-0.5.4 runs without problems!
 Other: Running Mandriva Free 2007 DVD 
 Other: Works Great 
 Other: Trabaja muy bien
 Other: Running SuSE 10.0 - needed some tweeking in YaST - threw out old card from Network Devices / Network Card configuration and installed new card with Module Name as "ndiswrapper" in Manual Network Card Configuration. Runs 128 bit WEP at 54Mbps. 

 Card: Netgear WG311T 108mbps
 Chipset: Atheros AR5212
 Distro: Mandriva One 2007.0 Offical

 Card: Netgear WG311 v2
 Chipset: TI ACX 111
 pciid: 104c:9066 Windows
 Driver: Drivers Version 1.0.1.7 http://www.Netgear.com/support/support_details.asp?dnldID=770 tested with Windows XP driver , no mode Master, mode Managed at 54M but mode Ad-Hoc at 11M , works with WEP 128 bits

 Card: Netgear WG311 v2,
 Chipset: TI ACX 111, pciid: 104c:9066 Windows drivers: 1.0.0.10 from - http://kbserver.Netgear.com/support_details.asp?dnldID=587 1.0.1.7 from http://kbserver.Netgear.com/support_details.asp?dnldID=770 Distro''s tried in: Suse 9.1 Professional, Suse 9.2 Professional, Gentoo 
 Versions of Ndiswrapper: 0.8, 0.11+CVS (03/Nov/2004), 1.0+CVS (05/Feb/2005), 1.1 (20/Mar/2005) 
 Versions of wpa_supplicant: Latest Development CVS 0.3.0(03/Nov/2004), 0.3.6 (05/Feb/2005), 0.3.8 (20/Mar/2005) 
 Click here for info... Suse Professional 9.x, Gentoo (Netgear WG311 v2, Suse Professional 9.1 old pages) 
 Set ups I have managed to get to work: 
 *Mode Managed at 54M with WEP shared key at 128 bits with ndiswrapper 0.8, net gear drivers 1.0.0.10 
 *Mode Managed at 54M with WEP shared key at 128 bits with ndiswrapper 0.11+CVS, net gear drivers 1.0.1.7 
 *Mode Managed at 54M with WPA-PSK with ndiswrapper 0.11+CVS (03/Nov/2004), wpa_supplicant 0.3.0 (development CVS 03/Nov/2004), net gear drivers 1.0.1.7 
 *Mode Managed at 54M with WPA-PSK with ndiswrapper 1.0+CVS (05/Feb/2005), wpa_supplicant 0.3.6 (development CVS 05/Nov/2005), net gear drivers 1.0.1.7 
 *Mode Managed at 54M with WPA-PSK with ndiswrapper 1.1 (20/Mar/2005), wpa_supplicant 0.3.8, net gear drivers 1.0.1.7

 Card: Netgear WG311 v2,
 Chipset: TI ACX 111, pciid: 104c:9066 Windows drivers: 1.0.1.7 (WEP & WPA) from http://kbserver.Netgear.com/support_details.asp?dnldID=770 Distros tried in: Mephis & Mandrake 10.1 Version of Ndiswrapper: 1.0 (Tested on 09/02/2005)

 Card: Netgear WG311 v2
 Chipset: TI ACX 111
 pciid: 104c:9066
 ndiswrapper 1.2-2
 Windows drivers: 2.0.0.7 (both WEP and WPA) from http://kbserver.Netgear.com/release_notes/d102550.asp

 Card: Netgear WG311v3 54Mbps PCI adapter
 pciid: 11ab:1faa (rev 03)
 ndiswrapper 1.5 using driver wg311v3, stock 2.6.14 kernel
 Tested with 11mbps and 128-bit WEP only, all other features untested.
 Tested with Gentoo linux-2.6.14-gentoo-r4 kernel, ndiswrapper 1.5, wg311v3 driver.  54mbps (.11g) with no WEP works. Note: CB55N51 driver did *not* work.  Couldn''t set essid.

 Card:Netgear WG311v3
 Distro: Slackware 10.2 + 2.6 kernel (optimised for below without 4Kblock size)
 Mobo: VIA MS10000
 *Worked no worries.  Windows XP driver caused horrible kernel panic and seize-up.  Windows 98 Driver works fully.

 Card: Netgear WG311 v3 (54Mbps wireless G PCI adapter)
 pciid: 11ab:1faa
 Distro: Suse 10.0
 Ndiswrapper: standard with suse 10: 1.2
 Driver: latest XP drivers on Netgear site at 3 jan. 2006: 02/22/2005,3.1.1.7 (so reads the .INF file)
 Mode: 54g with WPA TKIP
 Comments: I used the suse configuration center YAST to configure my WLAN card

 Card: Netgear WG511 54Mbps Cardbus adapter
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette? (rev 01)
 pciid: 1260:3890
 Driver: Netgear windows driver Version: Netgear, Inc.,06/04/2004, shipped with the setup CD
 Other: Slackware 10 - kernel 2.6.9-rc2 - Ndiswrapper 0.10; works very good at 54Mbps, also with WEP (64bit)

 Card: Netgear WG511 54Mbps Cardbus adapter, "Made in China" version
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette? (rev 01)
 pciid: 1260:3890
 Driver: SMC2802W driver used; available at http://www.smc.com/files/AV%5CDR_2802wV.2_WHQL.zip
 Other: Debian unstable; 2.6.9; Ndiswrapper 0.12 Note: Also works with winXP drivers (setup CD) and Ndiswrapper (1.0r2, on debian/sid 2.6.10).

 Card: Netgear WG511 54Mbps Cardbus adapter, "Made in China" (says v3 on the bottom of the card.)
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette (rev 01)
 pciid: 1260:3890
 Driver: http://kbserver.Netgear.com/products_automatic/wg511v1.asp , extract the
 Other: Debian testing, Linux 2.6.10-1-686, Ndiswrapper 1.0, WPA_Supplicant CVS (2005-02-09).  Note: Using driver netwg511 (Netgear, 09/06/2004, 2.1.25), so far WEP-128 and WPA-PSK all seem to work.

 Card: Netgear WG511 v3 (Made in China)
 Chipset: Intersil Corp.3890 PRISM GT 802.11g
 Driver: SMC2802W driver used; available at http://www.smc.com/files/AV%5CDR_2802wV.2_WHQL.zip (from above)
 Other:Mandrake 10.1, Linux 2.6.8.1-24mdk, ndiswrapper 1.1, WEP Note: Mandrake automatically loaded the prism54 module, but it didn''t work that well. I unloaded that and used ndiswrapper.  Works great.

 Card: Netgear WG511 v2 54Mbps Cardbus adapter (Made in China)
 Chipset: Marvell Technology Group Ltd.: Unknown device 1faa (rev 03)
 pciid: 11ab:1faa
 Driver: Windows 2000 driver available on the Netgear CD: WG511v2.INF
 Other:Tested with ndiswrapper 1.1 source compile. Also works with ndiswrapper 1.2 release, using Fedora Core 3, with 16k kernel from www.Linuxant.com (2.6.9-1.667), using Windows driver.

 Card: Netgear WG511 V2 (Made in Taiwan)
 Chipset: Marvell Technology Group Ltd.: Unknown device lfaa (rev 03)
 Driver: Windows XP driver available on the Netgear CD: WG511v2.INF . Also available at http://www.parseerror.com/cache/drivers/WG511v2/WG511v2-cd/Driver/ .
 Other: I''m using Ubuntu Breezy with Kernel 2.6.12-8-386. Ndiswrapper is provided by Ubuntu Breezy Colony 3 CD and version is 1.1-4. I also tried with Ubuntu Horay and its ndiswrapper seems to be broken. Once I upgrade to Breezy and it all works fine.

 Card: Netgear WG511 v2 (Made in China)
 Chipset: Marvell Technology Group Ltd.: Unknown device 1faa (rev 03)
 Driver: Any marvell chipset driver, either from the CD, from Netgear website or from Marvell website
 Other: You cannot have preemtive kernel. It hangs either on modprobe, or randomly later. Tried with 2.6.8, 2.6.12, 2.6.13.4 and ndiswrapper1.1 and 1.4.

 Card: Netgear WG511T 108Mbps Cardbus adapter (with super G)
 Chipset: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 pciid: 168c:0013 
 Driver: Windows XP driver available on the Netgear CD: netw511.inf + wg511nd5.sys Native
 Driver: MadWiFihttp://madwifi.sf.net/
 Other:Tested with ndiswrapper 1.2 source compile Note: It''s needded 2.6.11.7 kernel with no ACPI support (otherwise kernel risks to crash)

 Card: Netgear WN311T 300Mbps RangeMax Next
 Chipset: Marvell Pre-N
 pciid: 11ab:2a02
 Driver: Driver for Netgear WN311T http://kbserver.Netgear.com/products/WN311T.asp, Version 07/17/2006, 1.1.
 Other Tested with ndiswrapper 1.17 with WEP

 Card: Netgear WN511T 300mbps RangeMax Next (PCMCIA Card)
 Chipset: Marvell Pre-N
 pciid: 11ab:2a02
 Driver: Driver for Netgear WN511T (http://firmware.Netgear-forum.com/index.php?dlfile=705), Version 08/29/2006, 3.0
 Other: Tested with ndiswrapper 1.7 (utils) and 1.8 (drivers) for Kubuntu (Live DVD). 
 Other: The lspci command says: "Ethernet Controller: Marvel Technology Group Ltd: Unknown device 2a02 (rev 03)" 

 Card: Netgear WPN111 108Mbps RangeMAX USB (with super G/MIMO)
 Chipset: Atheros USB
 pciid: 1358:5f01 
 Driver: Windows XP driver available on the Netgear CD: netwpn11.inf + wpn111.sys + ar5523.bin
 Other: Install both wpn11 and athfmwdl drivers.

 Card: Netgear WPN311 RangMAX PCI Adapter
 Chipset: Atheros AR5212 802.11abg NIC (rev 01)
 pciid: 168C:0013  
 Driver: Windows XP drivers from the included Netgear CD
 Other: Compiled ndiswrapper 1.47 on Debian 4.0

 Card: Netgear WPNt511
 Chipset: Airgo networks Pre-N
 pciid: 17CB:0001
 Driver: Driver for Netgear WPNT511 http://kbserver.Netgear.com/products/WPNT511.asp, version 06/30/2005, 1.5.0.147. Tested with snapshot of 2006-02-02 with WPA2-PSK

 Card: Netgear WPNT511
 Chipset: Airgo Networks Inc Unknown device 0002 (rev 01) output of lspci
 pciid: 17CB:0002 !!
 Driver: Driver for Netgear WPNT511 tmimo3P.inf (winXP), driver version 2.0.1.19 (10/28/2005). 
 Other: Suse Linux 10.1 (Kernel-Update to 2.6.16.27-0.6-default was necessary), WEP, ndiswrapper 1.37 (02/02/2007),tried not all but some earlier versions of ndiswrapper - didn''t work!!!!

 Card: Netgear WG511 v2 (Made in China)
 Chipset: Marvell Technology Group Ltd.: Unknown device 1faa (rev 03)
 Driver: wg511v2 (Netgear,02/22/2005,3.1.1.7) from Netgear website, ndiswrapper 1.10 (preempt=no,smp=no), Linux 2.6.15.4, Slackware 10.2
 Other: "iwconfig wlan0'' &rarr; IEEE 802.11FH (!); "iwpriv wlan0 network_type g'' &rarr; IEEE 802.11g; works great!

 Card: Netgear WGM511
 Chipset: Airgo networks Pre-N
 pciid: 17CB:0001
 Driver: Driver for Netgear WPNT511 http://kbserver.Netgear.com/products/WPNT511.asp, version 06/30/2005, 1.5.0.147.

 Card: Netcow FC-NC9010 
 Chipset: Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03)
 pciid: 11ab:1faa
 Driver: Windows 2000 version of mrv8000c. Windows XP version made the system hang at boot while initializing network interface. http://downloads.trendnet.com/TEW-421PC_B1/Driver/Utility_Driver_TEW-421PC_423PI_b1_2.00.zip
 Other: ndiswrapper 1.8, kernel 2.6.15-16-386, Ubuntu Linux Dapper Drake (6.04) FlightCD 4. Cheap Wi-Fi card made in Taiwan bought from www.ldlc.fr

 Card: NogaNet TWL542C PCMCIA (Marvell 88w8335 Libertas)
 Chipset: Marvell 88w8335 Libertas 802.11b/g Wireless
 pciid: 11ab:1faa
 Driver: Copy mrv8335.cat mrv8335.inf MRV8335NT.sys MRV8335XP.sys from drivers CD to local temporary directory and run ndiswrapper 1.2 following the instrucctions of the Installation page.
 Other: Running SuSE 10.0. YaST detect de card but not find de proper kernel module, in this configuration you need to tell YaST to use ndsiwrapper module in Manual Network Card Configuration.

 Card: Netgear WG511v2 802.11g Wireless PCMCIA Card
 Chipset: Marvel Technology
 Driver: wg511v2.inf from the Netgear Install CD. Works with ndiswrapper-1.1. 
 Other: WPA works. Slackware 10.2, Kernel 2.6.13

 Card: Netgear WN121T - Wireless USB 2.0 802.11n (draft) adapter
 Chipset: Marvell 88W8360 USB / TopDog / 8360
 usbid: 0846:7100
 Driver: Driver available on accompanying CD or web
 Other: NOT TESTED! listed here for reference. Reported success on Marvell 8360 entry.

 Card: Netgear WN511B Rangemax Next
 Chipset: Broadcom unknown device 4329 (rev 01)
 pciid: 14e4:4329
 Driver: XP version 08/22/2006, 4.80.53.0 downloaded from Netgear 26/10/06
 Other: SuSE 10.1, ndiswrapper 1.27

 Card: Netgear WG111v1 802.11g Wireless USB 2.0
 Driver: v2.1 from http://kbserver.Netgear.com/release_notes/d102869.asp (dated October 5th, 2004) - netwg111.inf (in "ndis5'' directory in zip file.)
 pciid: 0846:4220
 Using ndiswrapper v1.8
 OS: Ubuntu 6.10
 Other: WEP works OK - details entered via Ubuntu "Networking'' Control Panel applet

 Card: Netcomm NP5420-802.11g PCI Adapter
 Chipset: Prism54 (Prism GT/Prism Duette)
 pciid: 1260:3890 (rev 01) Windows
 Driver: works using the SMC 2802W V2 windows driver on the web, (http://www.smc.com/files/AV%5CDR_2802wV.2_WHQL.zip). Had to use the drivers in D2 directory as Win XP drivers failed with a segmentation fault.
 Other:: Tested on Fedora core 3(with 16 stack kernel) and Suse 9.2, with WPA using wpa_supplicant.

 Card: Netcomm NP644 Super-G 108Mbps Wireless LAN USB Adapter
 Chipset: Atheros AR5001
 Driver: net5523.bin, net5523.inf, net5523.sys, athfmwdl.inf, athfmwdl.sys, from driver cd (D:\USB\setup\Setup.exe file version 4.1.100.1331).
 Other: Used ndiswrapper 1.23 on Fedora Core 4. Working with 128-bit WEP encryption. Won''t report signal strength.

 Palmtop: OQO Model 01+ built-in 802.11b (Atmel)
 Chipset: AT76C505 w/ RFMD 2958 radio
 usbid: 1557:0002
 Driver: The INF file I used is oem13.inf, and I just copied the oqowifi.* files from windows/system32 from the default OQO Windows image.
 Other: Used Fedora Core 4, 16K stack kernel from linuxant, ndiswrapper 1.16 stable. 
 Update: Well, it worked once. Now, I keep getting "error -22'' messages from the kernel.

 Card: Ovislink (wlb 1200) 
 Chipset: RTL8180 lpsci: 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)

 Card: Option GT Combo EDGE Datacard EDGE/GPRS/WLAN 802.11 b/g
 Board: V1931 D0004 Rev 3.0
 Chipset: Broadcom BCM4325/BCM2050
 pciid: 14E4:4325
 Driver: Vodafone Mobile Connect CD, bcmwl5 folder
 Other: It works on my Debian 2.6.13.4 with ndiswrapper 1.4. All I had to do after installing ndiswrapper was making symlink 14E4:4325.5.conf &rarr; 14E4:4320:14E4:100F.5.conf in /etc/ndiswrapper/bcmwl5, because my pciid is 14E4:4325 and driver only had config files for pciid 14E4:4320. Without this step it doesn''t recognise the card.

 Card: Option globetrotter (GT) Fusion+ GPRS/UMTS/HSDPA/WLAN card
 Chipset: Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 43)
 pciid: 11AB:1FAA
 Driver: I got mine from the t-mobile CD that came with it (mine is a "customized card'', basically meaning they slapped a t-mobile sticker on it). I have been looking for a way to download these drivers, but this is apparently not possible. I had to install the software on a windows box, then have it install the "Option PC Cards driver selection'' package. From that I got the files http://www.metro.cx/gtfp/gtnwlan.inf gtnwlan.inf and http://www.metro.cx/gtfp/mrvw125.sys mrvw125.sys. You can install those with "ndiswrapper -i gtnwlan.inf''

 Card: Ovislink (WL-8000PCI)
 Chipset: Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: Drivers are on CD or on Ovislink website. It is called firmware but it is only a zip archive containing software for windows and tnet1130.inf and tnet1130.sys files (those that are here required). Adress to download is: http://www.ovislink.fr/administration/pilotes/wifi/wl8000pci/8000PCI.zip
 Complementary required installation/information: Installation succeed on a Fedora Core 4 system (32 bits, still can''t succeed on 64 bits) ndiswrapper version is 1.4 and I had to install kernel-devel-2.6.11-1.1369_FC4.stk16.i686.rpm in order for my card to work. This patch allow the card to use a 16K stack instead of the 4K default one (removing the freezing issue...). Replace i686 by i586 if needed. Download here: http://www.linuxant.com/driverloader/wlan/full/downloads-fc4-kernel-i686.php

 Card: Peabird 802.11g Wireless PCI Adapter 54 Mbps PEAB-WLG-PCI
 Chipset: Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: Available at http://ftppeabird.peabird.com/GAMME%20WIFI/PEAB-WLG-PCI/Drivers/Winxp.zip but i used WinXP drivers from shipped CD-ROM (FW1130.BIN;FwRad16.bin;FwRad17.bin;TNET1130.INF;tnet1130.sys), works fine.
 Other: ndiswrapper 0.12 (.deb from ndiswrapper.sf.net), Debian Sid, custom kernel 2.6.9

 Card: Peabird 802.11g Wireless PCI Adapter 54 Mbps PEAB-WLG-PCI (version ?)
 Chipset: Marvell 8335
 pciid: 11ab:1faa
 Driver:http://www.marvell.com/drivers/driverDisplay.do?dId=122&pId=3

 Card: Peak Hardware 802.11g Wireless 54Mbps Cardbus Adapter
 Chipset: Texas Instruments, Subsystem: Abocom Systems
 pciid: 104c:9066
 Driver: Peak Hardware Distributed Windows Driver: http://www.peakhardware.com/support/downloads.aspx, works fine - up to 54Mbps.
 Other: WEP works. Also works with iwlist and airsnort. No support with Kismet as yet (21/10/04)

 Card: Philips CPWUA054 usb 11g
 Chipset: Accton Technology Corp
 usbid: 083a:5501
 Driver: provided in CD : ccucpwua.exe  cpwua2d.inf cpwua2d.sys
 Other: 2.6.9-gentoo-r4, Ndiswrapper 0,11 , works fine but got once a kernel oops, I''ll be back if I get it again

 Card: Philips SNN6500
 Chipset: Atheros Communications, Inc AR5006X
 pciid: 168c:001b
 Driver: http://www.p4c.philips.com/files/s/snn6500_00/snn6500_00_dxp_eng.zip
 Other: IBM ThinkPad T23. Unzip package and locate two files CPWU6D.inf and CPWU6D.sys. Copy them somewhere (your home directory?) and if you like, change their permissions to 644. Now you can command ndiswrapper -i CPWU6D.inf. Check if driver is installed and command ndiswrapper -l. The final steps is easiest to do with distros that includes graphical tools to set wireless cards. 

 Card: Philips SNU6500 Wireless USB adapter 11 b/g
 usbid: 0471:1233 (and 0471:1232 ?)
 Driver: CPWUA6D.INF and Files from CD dir Data/software/SNU6500/Driver or the latest driver from the web
 Other: Tested on Debian Unstable and kernel 2.6.18, running fine. Sometimes after reboots the device may need to be unplugged or the pc to shutdown before it can operate properly again. 

 Card: Planet WL-3563
 Chipset: Marvell W8300 (rev 07)
 pciid: 11ab:1fa6
 Driver: ftp://ftp1.planet.com.tw/Wireless_Lan/WL-3563/DR-WL3563v230.zip
 Other: Same Chipset as D-Link DWL-G510. Took Win98 Driver. WinXP Drivers fails unloading. Tested with Debian testing 2.6.7, Ndiswrapper 0.10, Ndiswrapper CVS.

 Card: Planet WL-8303
 Chipset: Realtek 8180 (rev 32)
 pciid: 10ec:8180
 Driver: ftp://210.51.181.211/cn/nic/rtl8139abcd8130810xseries/whql-xp2k(620).zip
 Other: Tested with Slackware 10 (Kernel 2.4.28) and Ndiswrapper 0.11.

 Card: Planet WL-8310
 Chipset: Atheros AR5212
 pciid:
 Driver: http://www.proxim.com/support/all/orinoco/software/download/8482_Drivers.zip
 Other: Tested with Gentoo (gentoo-dev-sources-2.6.9-r13) and Ndiswrapper 0.12-r1, only Managed mode works.

 Card: Planet WL-8313
 Chipset: Marvell W8300 (rev07)
 pciid:
 Driver: Original CD that came with the card
 Other: Tested with Debian 3.1 Sarge, WinXP drivers

 Card: Planex Communications Inc. (PCI) GW-NS54G 54Mbps Wireless LAN Cardbus
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev03)
 pciid: 14e4:4320
 Driver: Orig. CR-ROM that came with card.
 Other: Fedora Core 3 / Kernel 2.6.10-1.737_FC3 / NDISWrapper 0.12 works well with system. Only problem when card is pulled while system is running, Fedora locks up.

 Card: Proxim 8424-WD Wireless USB Adapter
 Chipset: Ambit Microsystems Corp? (from lsusb)
 usbid: 0bb2:0304
 Driver: Works with the WinXP driver in the shipped cd.
 Other: Debian sarge, 2.6.8 http://www.proxim.com/products/wifi/client/11busb/index.html

 Card: Proxim Silver 802.11a/b 8461-05
 Chipset: Atheros AR5211
 pciid: 168C:0012 Windows
 Driver: http://keygen.proxim.com/support/orinoco/8461_20b15.zip
 Other: WPA is not supported by this driver. However, with 802.11abg driver http://www.proxim.com/support/all/orinoco/software/download/8482_Drivers.zip, WPA works (CCMP/AES tested successfully). Depending on the wireless configuration, you may need to edit /etc/ndiswrapper/ntpr11ag/&lt;pciid>*.conf files to change the setting "NetBand" (this setting, its legal values and their meaning are explained in the INF file).

 Card: Proxim ORiNOCO 802.11a/b/g combocard gold?
 Chipset: Atheros AR5212 802.11abg
 pciid: 168c:0013
 Driver: Available at www.proxim.com, using standard WinXP driver. You need to create a free account to get the driver.
 Other: ndiswrapper 0.11, Fedora Core 3, works very solid (108Mbps).

 Card: Pentagram Hornet 802.11g lite WiFi USB (http://pentagram.pl/produkty/sieci_i_komunikacja/karty_sieciowe_w_tym_wi_fi/pentagram_hornet_wi_fi_usb_lite)
 Chipset: SiS163
 usbid: 0457:0163
 Driver: http://www.atlantis-land.com/firmware/3463_A02-UP-W54%5BV10-20%5D.ZIP
 Other: tested on gentoo. Please compile ndiswrapper with USE="usb" flag

 Laptop: Packard Bell EasyNote A6, A8 series
 Chipset: AirConn INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 17fe:2220
 Driver: Linksys Driver for WPC54G v4 product ftp://ftp.linksys.com/pub/network/WPC54G%20v4%20driver%20rev%201.22.1.2004.zip
 Used ndiswrapper -i WLINPDS.INF on Kubuntu 6.06 and Ndiswrapper v1.8 from repositories.
 Other: No encription has been tested, just regular traffic on insecured networks, but others laptops works fine with the same config.

 Card: Q-Tec (Marvell) 14100 54G PCCard http://www.qtec.info
 Chipset:  Marvell
 pciid: 11ab:1fa6 (rev 07)
 Driver: mrv8knt (Marvell,08/02/2004,2.5.1.1), Ndiswrapper 1.1
 Other: Slack 10.1, kernel 2.6.11.5 With wpa_supplicant v0.3.8 the system is very unstable.

 Card: Quetec ASW2301 PCI Adapter http://www.quetec.net/products/product.asp?id=2
 Chipset: WavePlus 1200 http://www.waveplus.com/wp1200_wp1201.asp
 pciid: 17f7:0001 (rev 01)
 Driver: Ndiswrapper 1.0rc4(or nightly build) Originally http://www.quework.com/Quetec_11b_PCI_PCMCIA_2.5.30.0_Setup.zip but as this is an installer I have extracted the relevant files here http://f-box.org/~dan/files/wpndis51.rar (I hope this doesn''t break copyright!)
 Other: Gentoo (kernel 2.6.12-gentoo-r9) running. The config I have it running with is here http://f-box.org/~dan/files/linux-2.6.12-gentoo-r9.config.txt Help: I might be able to help you with config of this card drop me an email: dan_AT_f-box_org

 Card: RTL8187B integrated in the laptop Gateway ML6720
 Chipset: RTL8187B
 USB Bus ID: 0BDA:8189
 Driver: Win98 
 from: ftp://202.65.194.212/cn/wlan/RTL8187B_driver_only.zip
 Other: Using ndiswrapper driver version 1.49, SUSE10.3 with kernel 2.6.22-9
 Other: XP driver does not work - just see access points, no connect

 Card: ROLINE RWA-54 W-LAN 54 PCI Adapter
 Chipset: RaLink? RT2500 (rev 01)
 pciid: 1814:0201 (rev 01)
 Driver: Ndiswrapper 0.11 and RT2500 thingies (.inf and .sys for WinXP) from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Debian (kernel 2.4.26) running (still working on the config, but card is running!).

 Card: Ralink USB 2.0 802.11g WLAN + Pen Drive
 Chipset: RT2500
 USB Bus ID: 148f:2570
 Driver: Windows XP drivers from installation CD
 Other: Using ndiswrapper driver version 1.16, utils version 1.8, Fedora Core 4 with kernel 2.6.16-1.2096_FC4 and 2.6.16-1.2111_FC4 on HP Pavilion dv4000
 Other: ndiswrapper uses rt2500usb driver from Windows XP driver installation CD.  Windows driver obtained by installing on Windows partition, and copying over to Linux
 Other: Supports WPA with wpa_supplicant -Dwext
 Other: Auto-connects to pre-configured access point.  No hanging experienced on removal. Works flawlessly.
 Other: NetworkManager switches to USB adapter on insertion, but does not revert to built-in wireless adapter when USB adapter is removed.
 Other: This device is sold by Dick Smith Electronics (DSE) in New Zealand as the DSE USB 2.0 802.11g WLAN Adapter

 Card: ROLINE RWA-54 W-LAN 54 PCI Adapter
 Chipset: RaLink? RT2500 (rev 01)
 pciid: 1814:0201 (rev 01)
 Driver: Ndiswrapper 0.11 and RT2500 thingies (.inf and .sys for WinXP) from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Debian (kernel 2.4.26) running (still working on the config, but card is running!).

 Card: Repotec WB-7108 Cardbus Adapter
 Chipset: RaLink? RT2500 (rev 01)
 Driver: Ndiswrapper 0.11 and RT2500 from ftp://ftp.a-link.com/wl54h/WL54driver2.2.6.0.zip
 Other: Fedora Core 3 with 2.6.10 kernel - using the exact WinXP drivers as the ROLINE, above.

 Card: RealSat RS2100
 Chipset: RaLink? RT2561st (Unknown device 0302)
 Driver: Ndiswrapper 1.15 and RT2561 from http://www.ralinktech.com/drivers/Windows/IS_AP_STA_61_D-1.1.0.0_2500_D-3.1.0.0_RU-1.1.9.0_AU_1.0.7.0_031506_0.0.1.6.exe
 Other: Fedora Core 5 with kernel-2.6.15-1.2054_FC5 - extract the drivers and copy the WINXP folder created.

 Card: Integrated in Packard-Bell EasyNote SW - Turion 64&times;2
 Chipset: RaLink? RT2573 - USB ID 148F:2573
 Driver: Ndiswrapper 1.24rc4 and RT73 from http://www.ralinktech.com/drivers/Windows/IS_AP_STA_7x_D-1.1.2.0_2500_D-2.1.0.0_RU-1.2.5.0_AU_1.1.3.0_081606_0.0.5.0.exe
 Other: SuSE linux 64 bits build - Ndiswrapper requires a 64 bits windows driver
 Other: extract the XP drivers and copy the driver files created in "RALINK/RT7x Wireless LAN Card/Installer/WINX64"
 Other: Does not support switching off Wifi or sleeping, you''ll have to unload and reload the module

 Card: Realtek 8139d (card manufactured by Silan Microelectronics) 
 Chipset: rtl8139d (Unknown Device 1904:8139)
 Driver: ndiswrapper-utils ver:1.8.0ubuntu2 and driver provided for winxp in included cd

 Card: Safecom 54Mbps 802.11g Wireless LAN PCI Card
 Chipset: TI ACX111
 pciid: 104c:9066
 Driver: TNET1130.INF, supplied on CD with PCI card
 Other: Mandrake 10.1 (kernel 2.6.8) - use ndiswrapper version 1.2, 32bit WEP managed

 Card: Safecom 54Mbps Wireless USB LAN 802.11g+
 Chipset: Texas Instruments tusb1150 - description may be incorrect - referred to as TNETW1150 elswhere.
 usbid: 07b8:b21a
 Driver: tusb1150.inf - available in Wireless utility folder after installation in XP
 Other: Folder contains both tusb_XP.sys, and tusb_9x.sys, so probably both also available after installation in 9x. I copied all files from folder to Linux. Used DSL-N (Damn Small Linux -Not - aug06 iso download), with installed ndiswrapper version (utils version 1.8, driver version 1.14). Kernel version 2.6.12, on 256Mb dell 505 laptop. Worked with WEP 128

 Card: Sagem USB XG703A
 Chipset: GlobespanVirata
 usbid: 0cde:0008 Rev=10.40
 Driver: WlanUIG.inf, from http://lgsagem.free.fr/Telechargement/Driver%20WIFI/Windows/Utilitywifixg703a%2080211g.zip
 Other: Debian sid (kernel 2.6.9) - use ndiswrapper version 1.0rc1, 128bit WEP managed

 Card: Senao 3054MP+ (J) 802.11g mini PCI Card
 Chipset: Intersil 3886IV
 pciid: 1260:ffff (rev 01) Subsystem 1260:000
 Driver: PRISMA02.inf from http://www.senao.com/english/product/driverdb/000113176/CB-PLUS-UB5-WUB-3014.zip, check it contains the line  %A002_DESC_STR% = PRISM_A002, PCI\VEN_1260&DEV_FFFF&SUBSYS_00001260
 Other: tested with ndiswrapper-1.6, vanilla kernel 2.6.15-rc1. I used the INF/SYS files  from the WinXP folder. The desciption strings in the INF file refer to Cardbus devices, but it works OK for mini PCI as well. WPA TKIP now working after I upgraded wpa_supplicant from version 0.4.4-1mdk ( as shipped with Mandriva 2006 ) to 0.4.7

 Card: Senao SUB-316 USB Donge 802.11g USB 2.0 Adapter
 Chipset: sis163u (Silicon Integrated Systems Corp)
 usbid: 0457:0163
 Driver: Supplied on CD, SiS163u.INF
 Other: It works perfectly with ndiswrapper-1.19 and 1.21, I use Ubuntu Dapper Drake.

 Card:Shuttle PN11 USB WLAN module
 Chipset: Prism USB
 usbid: 124a:168b
 Driver: ftp://ftp.shuttle.com/Drivers/new/pn11/pn11%20driver.zip
 Other: Tested with ndiswrapper-1.0rc2 / Knoppix / kernel 2.6.9. iwconfig reports 0 Bitrate in Ad-Hoc mode but seems to be running at full 11Mpbs. Some problems with card not being recognised on restart - have to disconnect and reconnect from motherboard :/

 Card:Shuttle PN15 USB WLAN module
 Chipset: Prism GT
 usbid: 124a:4023
 Driver: http://www.iogear.com/support/driver/GWU513_1203A.zip
 Other: Test with ndiswrapper-0.12rc1-1.0rc2 / Debian SID / kernel 2.6.7-2.6.10 and crash the net and keyboard, I''m testing with stacks 16kb.

 Card: Siemens Gigaset USB Adapter 54
 Chipset: Prism Javelin ISL3886/NetChip NET2280
 usbid: 083a:4502
 Driver: SE4501D.inf, from supplied cd (xp installation), manufacturer Siemens AG http://www.siemens-mobile.com/gigasetusbadapter54
 Other: SuSE 8.2 (kernel 2.6.8) - use ndiswrapper 0.11-rc1, 128bit WEP managed
 Other2: Mandrake 10.0 (kernel 2.6.7 without Mandrake patches), works with ndiswrapper 0.11
 Other 4: Suse 9.3 - ndiswrapper can freeze with newer driver versions. Workaround: Try to use drivers from the "T-Sinus 154data" http://www.telekom.de/etelco/downloads_navi/1,18139,1043_1151_1180-1,00.html

 Card: Siemens Gigaset PC Card 54
 Chipset: Broadcom BCM94306 802.11g rev.3
 pciid: 14e4:4320
 Driver: bcmwl5.inf from supplied cd for Windows 98/ME, manufacturer Siemens AG
 Other: Fedora Core 2 (kernel 2.6.8-1.521.stk16) - use ndiswrapper 0.11, 128bit WEP managed

 Card: SiS 162u, Some ASUS notebook use it as integrated wlan card
 Chipset: SiS 162u
 pciid: 0457:0162
 Driver: use inf file from supplied cd for Windows XP or download the latest driver from SiS website, manufacturer SiS
 Other: Debian (kernel 2.6.8-2) - use ndiswrapper 1.4, 128bit WEP not tested
 Other2: Works on Asus A4000L, Kubuntu (kernel 2.6.12-9-386), ndiswrapper 1.5 (compiled), driver from SiS website, WPA with wpa_supplicant. 

 Card: Sitecom WL-011 v2
 Chipset: AMD AM1771
 Driver: http://www.smc.com/files/AQ%5CDR_SMC2602Wv3_2_5.zip
 Other: This driver works only with 2.6 kernels with preemption enabled (tested with vanilla 2.6.15 and 2.6.16 kernels with preemption enabled). Works with ndiswrpper 1.12 with WPA-PSK + TKIP.

 Card: Sitecom WL-113 v2 USB (Device ID 0df6:9712)
 Chipset: ZyDAS
 Driver: rt73.inf, rt73.sys from installation CD ROM
 Other: Works with Kernel 2.6.18 ndiswrapper-1.14-svn-rev-1940

 Card: Sitecom WL-168 USB (Device ID 0df6:000d)
 Chipset: RTL8187L
 Driver: WinXP from http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true#RTL8187L
 Other: Works with Suse 10.3 Kernel 2.6.22.12-0.1-default ndiswrapper 1.17 and Pardus 2007.3 Kernel 2.6.18.8-86 ndiswrapper 1.49 and WPA-PSK and WEP

 Card: SMC 2635W v1
 Chipset: ADMtek ADM8211 802.11b pccid: 1317:8201
 Driver: http://www.infineon.com//upload/Document/cmc_upload/documents/010/7243/ADM8211_Window_driver_1.79.zip
 Other: Works successfully on Fedora Core 2/3 using ndiswrapper 0.12 and WEP
 Other: Works successfully on Fedora Core 5 / kernel 2.6.17-1.2174_FC5 using ndiswrapper 1.21 and WEP (open) on Dell Inspiron 1000

 Card: SMC 2635W v2
 Chipset: RaLink RT2400/RT2460
 pciid: 1814:0101 Windows
 Driver: http://www.ralinktech.com/drivers/Windows/IS_RT2460_WPA_031804_Drv2.01.00.zip
 Other: Works with WEP and WPA with TKIP cipher.

 Card: SMC 2802W V2
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette? (rev 01)
 pciid: 1260:3890 (rev 01)
 Driver: SMC Europe http://www.smc.com/files/AV%5CDR_2802wV.2_WHQL.zip
 Other: Gentoo 2.6.7, Ndiswrapper 0.9+CVS@040812 Manual compile (not ebuild); removed 0.8 that came from portage; worked for me after I reinstalled the driver with newly compiled version

 Card: SMC 2835W V1
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette? (rev 01)
 pciid: 1260:3890
 Driver: http://kbserver.netgear.com/products_automatic/wg511v1.asp
 Other: Libranet 2.8.1 (debian kernel 2.4.23), Ndiswrapper 1.3rc1, Wpa_supplicant 0.3.9; 54Mbps, WPA-PSK works!!!  Caveat: note that driver comes from netgear.  I could not get any smc driver to work with this card.  But the netgear driver 2.1.25 (dated 09/06/2004 in inf file) works like a charm!

 Card: SMC 2835W V2
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette? (rev 01)
 pciid: 1260:3890
 Driver: SMC Europe http://www.smc-europe.com/english/support/driver_manual/wirel/2835W_V2.html
 Other: Slackware 10 - kernel 2.6.9-rc2 - Ndiswrapper 0.10; works very good at 54Mbps, also with WEP (64bit)

 Card: SMC2835W-V3
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette (rev 01)
 pciid: 1260:3890 (rev 01)
 Driver: http://www.smc-europe.com/english/support/driver_manual/wirel/2835W_V3.html
 Other: Works with Fedora Core 3 - kernel 2.6.10-1.741_FC3 - ndiswrapper 1.0rc2; 54 Mbps, WEP (128 bit). I tried to get it working with the native prism54 linux driver, but it didn''t work.

 Card: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette? (rev 01)
 pciid: 1260:3890 (rev 01)
 Driver: SMC Europe http://www.smc-europe.com/english/support/driver_manual/wirel/2802W_V2.html mode: ad-hoc with linux-station (acx111) - no wep speed: ~14Mbit (no MTU tuning or something else)
 Other: Gentoo 2.6.8-r1, Ndiswrapper 0.10rc1+CVS@040820 Manual compile (not ebuild); worked for me after I reinit the driver with newly compiled version

 Card: SMC 2862W-G EZ Connect Wireless USB 2.0 Adapter
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette?
 usbid: 0707:ee06 Mode: Managed with WEP128. Access point is a Netgear WG602v2.
 Driver: SMC Europe http://www.smc-europe.com/english/support/driver_manual/wirel/2862W_G.html
 Other: Debian »Scud«, Linux 2.6.7-ck5 (manually compiled), NdisWrapper? 0.10+CVS@040912. Works like a charm. WPA not tested.
 Other2: SuSE9.1Pro, Linux 2.6.5-108 (default SuSE kernel), NdisWrapper? 0.10+CVS@040913.  Tested without encryption, static ip addressing, essid broadcast on. US Robotics Turbo Access Point + Router.

 Card: SMC 2862W-G EZ Connect Wireless USB 2.0 Adapter
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette?
 usbid: 0707:ee13 Mode: Managed with WEP128.
 Driver: SMC US http://smc.com/index.cfm?event=viewProduct&localeCode=EN_USA&pid=585
 Other: Debian Sid, Linux 2.6.10 (manually compiled), NdisWrapper 1.1. Works like a charm. WPA not tested.

 Card: SMC SMCWCB-G EZ Connect g WLAN Cardbus Adapter
 Chipset: Atheros
 usbid: 168c:001a
 Driver: as supplied with the card with ndiswrapper, also works with native (linux) ath_pci driver, with WEP (tested in Xubuntu 6.06, no lights)
 Other: Fedora Core4 2.6.12 with the 12K stack mod ndiswrapper 1.6

 Card: SMC SMCWCBT-G EU EZ Connect" g Wireless Cardbus Adapter 
 Chipset: Atheros Super G
 pciid: 168c:0013 (rev 01)
 Driver: SMC EU http://www.smc.com/index.cfm?event=downloads.doSearchCriteria&localeCode=EN_NLD&knowsPartNumber=true&productCategory=&userPartNumber=99-012084-438&downloadType=1&os=8
 Other: Debian Sid 2.6.15 with Ndiswrapper 1.8, WPA-PSK by wpa_supplicant.

 Card: SMC SMCWPCI-G EU 802.11g 54 Mbps Wireless PCI Adapter 
 Chipset: Realtek RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
 pciid: 10ec:8185 (rev 20)
 Driver: The WinXP driver from the factory CD
 Other: Ubuntu 7.04 Linux 2.6.20-16-generic i686; ndiswrapper 1.38. Worked on channel 6 and needed to add "irqpoll" to kernel boot options. On channel 11 or with no "irqpoll", system freezes with "BUG: Soft lockup detected on CPU0!" while "Configuring network interfaces" at bootup.

 Card: SMC SMCWUSB-G EU EZ Connect USB Adapter
 Chipset: Accton Technology Corp.
 usbid: 083a:4505
 Driver: http://smc.com/files/AY%5CDRV_SMCWUSB-G.zip
 Other: Runs fine on Arch Linux 0.7.2, kernel 2.6.17-ARCH, ndiswrapper 1.24, WEP enabled

 Card: SMC SMCWUSBT-G EU EZ Connect USB Adapter
 Chipset: Atheros ar5523
 usbid: 1690:0710 Askey Computer Corp. hex
 Driver: You need two drivers for this dongle; ar5523.inf and athfmwdl.inf. The drivers from the install CD-ROM (for 2kXP) work nicely
 Other: Runs smoothly on Debian testing 2.6.17. Since this kernel does not have an option to disable 4k stacks I patched the kernel with the appropriate linuxant 16kstack patch from http://www.linuxant.com/driverloader/wlan/full/archive/ this page. It will _not_ work without this!.

 Card: SMC SMCWUSBT-G2 EZ Connect" g Wireless USB Adapter
 Chipset: Atheros Super G
 usbid: 083a:4507
 Driver: http://www.smc.com/files/AD%5CDRV_SMCWUSBT_G2.zip
 Other: Debian Etch, Linux 2.6.18-4 and NDISwrapper 1.42 (no luck with 1.43).

 Card: Sphairon Turbolink UB801R (Wireless USB 2.0 Adapter)
 Chipset: Ralink rt2500usb
 usbid: 114b:0110
 Driver: http://www.sphairon.com/media/download/software/937938_CB801R_deutsch_Treiber.zip
 Other: Debian Sarge, Linux 2.6.11.6 (with debian patch-set, manually compiled), NdisWrapper 1.0rc2 (Debian Sarge Package), only with USB 1.1

 Card: Sony Ericsson GC79 GPRS/Wireless LAN PC Card
 Chipset: modified-like Broadcom Corporation BCM4306 (rev 03), 802.11b only
 pciid: 14e4:4320
 Driver: Only works with driver shipped by Sony at http://www.sonyericsson.com/downloads/V1.1.1.939_WHQL_USA_GC79_Web.zip
 Other: Successfully tested on Debian GNU/Linux Sid (unstable) with: Ndiswrapper version 0.8 and 0.9 Sony Ericsson driver. Note that legacy Broadcom driver used for my Dell TrueMobile? 1400 doesn''t work for this adapter, which makes me think we have a modified chipset.

 Card: Sitecom WL-100i
 Chipset: Intersil Corporation Intersil ISL3890 Prism GT/Prism Duette (rev 01)
 pciid: 1260:3890 (rev 01)
 Driver: SMC Europe http://www.smc-europe.com/english/support/driver_manual/wirel/2802W_V2.html Speed: 24Mb/s
 Other: Works with ndiswrapper 0.10, n.b. doesen''t work with Sitecom drivers at time of writing, use smc 2802W_V2.  (kernel 2.4.20-8, Red Hat 9). 64bit WEP Managed. Note also supported with Linux driver at http://prism54.org

 Card: Sitecom WL-100b
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02), device  182d:9064
 pciid: 14e4:4320 (rev 02)
 Driver: http://www.sitecom.com  http://www.sitecom.com/md_download.php?md_id=927
 Other: Works with ndiswrapper 1.5, had to remove the other entries from the NetGtks.inf file (which can after installation be found under Program Files/WMonitor/), otherwise ndiswrapper would complain about too many .sys files on loading the module.
 Other2: It worked for me on debian with ndiswrapper 1.1rc with the driver from ftp://ftp.support.acer-euro.com/notebook/aspire_1500/drivers/80211g.zip-I used the BCMWL5A.INF.
 Using SuSe 10.0 with AMD Sempron 2200

 Card:Sony PCWA-C500 VAIO 5GHz 802.11a Cardbus WLAN adapterChipset: Atheros AR5000
 pciid: 168c:7000 (rev 01)
 Driver: Windows drivers from &lt;BR>http://esupport.sony.com/perl/swu-download.pl?mdl=PCWAC500&upd_id=1258&os_id=7.  Mad Wi-Fi Linux driver does not work (need tweaking?): "dhcpcd ath0" does not work, cannot get a lease.
 Other: Works on Slackware 10.1 and UbuntuHHH with Ndiswrapper 1.1 built from source (ndiswrapper from Ubuntu distro does not work, also need to put mad wi-fi drivers into hotplug blacklist). "iwconfig" wrongly reports "IEEE802.11b" and "Frequency:41.12GHz"!

 Card: Sweex Essentials Wireless PCI card 54MBPS 11g (rev 01)
 Chipset: RT2500 (Ralink)
 pciid: 1814:0201 
 Driver: get the driver for the RT2500 based card from http://www.sefcom.nl/Rt2500.INF
 Other: Successfuly installed the driver on Suse 10, 10.1, Novell Suse 10 Desktop Enterprise, Redhat/Fedora Core 4 & 5, Ubuntu Dapper and Mepis. WEP 128 bits does work, WPA i did not check. No problems occured.

 Card: Sweex Essentials Wireless PCI card 11b
 Chipset: Realtek RTL8180L
 pciid: 10ec:8180
 Driver: Driver for RTL8180L from http://www.realtek.com.tw/downloads/downloads1-3.aspx?software=True&refdesign=True&spec=True&other=True&series=2002121
 Other: Successfuly tested in a system with the following configuration: Ndiswrapper version 0.9 RTL8180L Windows XP driver 1.70 Kernel version 2.4.20-31.9 Problems: WEP does not work. No sync problems detected.
 Other2: Installation instructions for Fedora Core 2

 Card: Sweex Wireless LAN PCI Card 140 Nitro XM (LW142)
 Chipset: Intersil Corporation ISL3886 Prism Javelin/Prism Xbow (rev 01)
 pciid: 1260:3886
 Driver: wlancig from CDROM or http://www.sweex.com/documents/LW142/1/LW142_driv_all.zip.  Version (from inf): 02/16/2005, 3.3.20.0
 Notes: Successfuly installed the driver on Gentoo, kernel 2.6.18-gentoo-r4, ndiswrapper 1.25.  WPA2.  Did not test other modes, however, ndiswrapper reports: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK.  When I compiled ndiswrapper, it complained that I seem to be using 4K stacks.  Nonetheless, everything functions properly.

 Card: Sweex WiFi LAN 140 Nitro XM (LW143)
 Chipset: ISL3887A rev1
 pciid: 0CDE:0015
 Driver: from CDROM or http://www.sweexeurope.com/media/drivers/LW143_driv_all.zip
 Notes: works with ndiswrapper 1.21, kernel 2.6.17 and Linuxant 16k stack patch. Before installing the .inf and .sys into ndiswrapper, you must remove the space before WLAN_USB2.XP.NT (line 90) and COMMON_NDIS_REG_NT (line 330) in file WlanUIG.INF.

 Card: SAGEM XG-760A 802.11b+g
 Chipset: ZyDAS ZD1211
 pciid: 079B:004A
 Driver: Driver http://lgsagem.free.fr/Telechargement/Driver%20WIFI/Windows/XG-760A-ZD1211USB_Install_4_6_0_0_ALL.zip
 Other: Worked like a charm for me : Debian/Testing (Etch), kernel 2.6.12-1-686. Ndiswrapper 1.5

 Card: Sitecom WL-140
 Chipset: Intersil Corporation ISL3886 Prism Javelin/Prism Xbow (rev 01)
 pciid: 1260:3886
 Driver: http://download.fujitsu-siemens.com/Download/ShowDescription.asp?SoftwareGUID=3B928095-EEEE-4194-91A7-E0CBE2D28B56
 Other: System: Tecra 8100 / 2.6.14-gentoo-r5 / i686 Pentium III (Coppermine) GenuineIntel GNU/Linux / emerge: net-wireless/ndiswrapper-1.7 / WEP: enabled

 Card: Sinus 154 stick
 usbid: 0572:2002 Conexant Systems (Rockwell), Inc.
 Driver: prisma02 from http://www.t-com.de/dlp/eki/downloads/Sinus%20154%20Serie/Sinus154stick_V3.3.36.0.zip
 Other: Works both with WEP and WPA/WPA2

 Card: SAGEM XG-760A 802.11b+g
 Chipset: ZyDAS ZD1211
 pciid: 079B:004A
 Driver: Driver http://lgsagem.free.fr/Telechargement/Driver%20WIFI/Windows/XG-760A-ZD1211USB_Install_4_6_0_0_ALL.zip
 Other: Worked like a charm for me : Debian/Testing (Etch), kernel 2.6.12-1-686. Ndiswrapper 1.5

 Card: Sitecom WL-140
 Chipset: Intersil Corporation ISL3886 Prism Javelin/Prism Xbow (rev 01)
 pciid: 1260:3886
 Driver: http://download.fujitsu-siemens.com/Download/ShowDescription.asp?SoftwareGUID=3B928095-EEEE-4194-91A7-E0CBE2D28B56
 Other: System: Tecra 8100 / 2.6.14-gentoo-r5 / i686 Pentium III (Coppermine) GenuineIntel GNU/Linux / emerge: net-wireless/ndiswrapper-1.7 / WEP: enabled

 Card: SIEMENS GIGASET USB 108 ADAPTER
 Chipset : Atheros 5523
 usbid: 129b:160b
 Drivers: athfmwdl + net5523 (both needed) from CD provided with device
 Other: Tested with ndiswrapper 1.8; WEP restricted mode 802.11g (54 MB/S) works; WPA don''t work; 108 MB/s don''t work

 Card: SIEMENS GIGASET USB 108 ADAPTER
 Chipset : Atheros 5523
 usbid: 129b:160c
 Drivers: athfmwdl + net5523 (unsure if both are needed) from CD provided with device
 Other: Tested with ndiswrapper 1.10; WPA works; 108 MB/s seems to work, too.

 Card: SIEMENS GIGASET 108 USB ADAPTER (with other driver)
 Chipset : Atheros 5523
 usbid: 129b:160b
 This work indicate good performance of the SIEMENS GIGASET 108 USB ADAPTER in combination with the driver which comes with the NETGEAR WG111T USB adapter. This work don''t use the driver with comes with the CDROM. Good signal strength with 54 Mb/s. Present work cannot test 108 Mb/s due to net limitations.
 Download this driver from http://www.netgear.de/download/WG111T/WG111T_GRV1.2.zip. This driver comes with two sets of .inf and .sys files: athfmwdl and netwg111t. Both of these must be installed with their *.inf files. After that, ndiswrapper-1.7 can be used as in the case of other drivers
 Encryption: WPA-PSK (TKIP) works for this driver installation with the version wpa_supplicant-0.4.7.

 Card: Sitecom WL-115 Wireless Network PCI Card - 54g
 pciid: 1814:0201 RaLink RaLink RT2500 802.11 Cardbus Reference Card
 Driver: Used Windows XP drivers from the CD shipped with the product, but extracting them is a real pain - cabextract and unshield will not be of any  help, since they are crippled in a multiple operating systems installer in a way I had not seen as of yet. Drivers can be found here: http://emanuele.cipolla.googlepages.com/sitecom-wl115.zip.
 Encryption: WEP works OK; WEP untested.
 Other: Tested with ndiswrapper 1.14, under Slackware GNU/Linux 10.2, kernel version 2.6.13 from the test26.s disk: Ad-Hoc mode works OK, but randomly clients seem to die; doing a iifconfig wlan0 down; ifconfig wlan0 up/i fixes it. This problem is mostly recognizable after many hours of intense transfers.

 Card: SMC2835W
 Chipset: Intersil Corporation ISL3890 Prism GT/Prism Duette/ISL3886 Prism Javelin/Prism Xbow (rev 01)
 usbid: 1260:3890
 Driver: AX\DR_2835wV.2_V.3_WHQL.zip downloaded from SMC US site - use XP driver
 debian kernel 2.6.8, wpasupplicant 0.5.5-4, ndiswrapper 1.11 (compiled with gcc-3.3)
 WPA-PSK works

 Card:THOMSON SpeedTouch 120g Wireless USB Adapter
 Chipset: Prism GT USB  ( netchip net2280 and isl3886IK )
 usbid: 06B9:0120 Windows
 Driver: http://www.speedtouch.co.uk/120.asp
 Other: I used the driver on the CD (/cdrom/SetupWizard/SpeedTouch_120g/Drivers/Win98/BT4501D.inf).  Kernel vmlinuz-2.~kanotix-8.  See also: http://linux.derkeiler.com/Newsgroups/comp.os.linux.networking/2004-10/0092.html

 Card:THOMSON SpeedTouch 121g Wireless USB Adapter
 Chipset: (?)
 usbid: 06B9:0121 Alcatel Telecom
 Driver: http://www.speedtouch.com/prod121g.htm
 Other: Using it on Mandrake LE 2005, default 2.6.11mdk kernel. Have experienced a few system freezes, or the device stopping working after a while. See also: http://www.darandandunguen.org/2005/07/08/configurar-el-speedtouch-121g-en-debian-gnulinux-parte-i/ and http://www.darandandunguen.org/2005/07/21/usar-encriptacion-wpa-personal-con-el-speedtouch-121g-en-debian-gnulinux/

 Card:TP-LINK TL-WN250 (ver 2.0) PCI
 Chipset: Realtek RTL8180L
 pciid: 10EC:8180 Windows
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 version 173.
 Other: It has the same pciid as Trendnet TEW-226PC above. so I guess you can look there for more info. My system is FC2 with patched kernel from linuxant, the windows XP driver from TP-LINK doesnt work for me (it conflicts with keybord), so please try the one from Realtek.

 Card: TP-LINK TL-WN620G, 108 Mbps
 Chipset: Atheros
 USBID: 0CF3:0002
 Driver: tl-wn620g.{sys,inf} from the cd or download the BETA drivers from http://www.tp-link.com.cn/
 Other: WPA-PSK works, with wpa_supplicant 0.5.3, 0.5.4
 Other: Linux 2.6.15.7 (vanilla) with ndiswrapper 1.18 works fine
 Other: Linux 2.6.16.27, 2.6.18, 2.6.18.1 (vanilla) with ndiswrapper 1.21, 1.23, 1.24, 1.25 works, too.
 Other: If you use the driver from www.tp-link.com.cn, you''d have to install net5523 first, then athfmwdl, otherwise the drivers won''t be loaded properly.
 Other: For Ubuntu 6.06 (DapperDrake) Linux 2.6.15-27, install the XP drivers athfmwdl.inf, then tl-wn620g.inf from the cd.

 Card: Topcom skyr@cer pro pc card 3054, superG (108Mb/s)
 Chipset: 02:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 usbid: 0506:0a11
 Driver: Supplied driver from cd
 Other: Ndiswrapper from 0.10+CVS. works. not at 108? this card also works with madwifi driver better speed

 Card: Topcom skyr@cer PC card 4011b (11Mbps)
 Chipset: 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20) pciid: 10ec:8180
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?keyword=8180 Other: Gentoo 2004.3 kernel 2.6.9 ndiswrapper-1.0rc1

 Card: Topcom skyr@cer PCI 111 (11Mbps)
 Chipset: 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)
 pciid: 10ec:8180
 Driver: net8180 (Realtek,10/30/2003,5.162.1030.2003) from CD that came with card
 Other: kernel 2.4.27-1-686 on Debian.

 Card: Topcom Wireless USB Stick 54 Mbps - V2
 Chipset: SiS163u
 usbid: 0d8e:0163
 Driver: Tested with different versions of the sis163u.sys driver.
 Other: Kernel: 2.6.13-gentoo-r3  (Genkernel generated, 4k_stack, SMP & Preempt disabled) Ndiswrapper 1.15: I had to replace the Gentoo net.wlan0 rc-script with my own modified version, because with the original, only version v1.05 of the sis163u driver works and it has some association problems. remark: USB stick connected to USB 1.1 port.

 Card: Topcom Skyr@cer PCI 154 G (54Mbps)
 Chipset: Marvell W8300 802.11
 pciid: 0000:00:0a.0
 Driver: Included on the cd that came with the card. (I used the WinXP Driver)
 Other: I am using an Ubuntu Breezy (5.10)

 Card: TP-Link TL-WN510G  802.11a/b/g
 Chipset: Atheros
 pciid: 168c:001a
 Driver: Standard WinXP driver in the CDROM: 11gAdapter.inf and 11gAdapter.sys
 Other: ndiswrapper 0.11, Fedora Core 2 (kernel 2.6.8-1.521.stk16), work well after test, only drawback is the signal light doesn''t work properly as under windows.

 Card: Trendnet TEW-226PC
 Chipset: Realtek RTL8180L
 pciid: 10EC:8180 Windows
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 version 1.70.
 Other: Works with WEP and WPA with TKIP cipher (although the card claims to support AES, it doesn''t work with this cipher).

 Card: TP-LINK TL-WN610G, 108 Mbps
 Chipset: Atheros .Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 ndiswrapper version 1.9
 driver version: 1.31
 vermagic: 2.6.18.2-34-default SMP mod_unload 586 REGPARM gcc-4.1 Suse 10.2 
 Driver: tl-wn610g.{sys,inf} drivers from http://www.tp-link.com.cn/ 2.6.18.2-34-default SMP mod_unload 586 EGPARM gcc-4.1 drivers on disk crash the system.

 Card: Trendnet TEW-228PI
 Chipset: Realtek RTL8180L
 pciid:  (as reported by lspci -n ) 00:0e.0 Class 0200: 10ec:8180 (rev 20) Windows
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 used win2k driver contained in ndis5x-8180(173).zip
 Other: Works with WEP with a netgear WGR 614 v4 router ok, have not tried other encryptions  version of ndiswrapper 0.11, mdk10.1  kernel  2.6.8.1-10mdk, using windows drivers (which worked ok in doze) that came with cd caused freezes

 Card: Trendnet TEW-229UB H/W:USB2.0 (11Mbps 802.11b Wireless USB Adapter)
 Chipset: sis162u (Silicon Integrated Systems Corp)
 pciid: 0457:0162
 FCC ID: NHPWLB1500
 Driver: sis162u.inf (the XP driver from the Trendware website (http://www.trendware.com/en/asp/download_manager/list_subcategory.asp?SUBTYPE_ID=670# , link TEW-229UB USB 2.0 Utility).
 Other: The "Utitlity" (a zip file) unpacks several files. The kernel crashes. I try to investigate the problem. The basic functions work but still not reliable in the long run. 
 WPA is working (SMC SMC2804WBRP-G) in Fedora 7+patches up to September, 2007 (2.6.22 kernel using NetworkManager) and also with Fedora Rawhide 2.6.23 kernel, using ndiswrapper 1.47 with a trivial patch for the change in kmem_cache_create. (OLD INFO: I got some errors parsing the inf-file after installing the driver with ndiswrapper -i /path/to/your/driverdir/sis162u.inf  but it works. For me (running Debian Sarge, Kernel 2.6.8) WEP encryption works (WPA not tested). @Giri et al.: "Really great work!'' Thank you! ).  

 Card: Trendnet TEW-424UB
 Chipset: Realtek RTL8187B
 usbid:  (as reported by lsusb ) 0bda:8189
 Driver: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true used winXP driver contained in RTL8187B_logo_6.1074.0406_silent_install.zip
 Other: Works with WEP, have not tried other encryptions, using ndiswrapper from kernel 2.6.20 (Ubuntu)

 Card: Trendnet TEW-301PC, a.k.a. D-Link DWL-520+
 Chipset: TI ACX 100
 pciid: 104c:8400 Windows
 Driver: http://www.trendnet.com/en/asp/download_manager/list_subcategory.asp?SUBTYPE_ID=249&SUBMIT=Go#.  WPA is not supported by this driver. D-Link''s drivers are available from their web site but do not work me on kernel 2.6.8.1, ndiswrapper 0.10.

 Card: TrendNet TEW-401PC wireless PCMCIA
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)
 pciid: 14e4:4320 0280 (rev 02)
 Driver: Dell TrueMobile 1300 R102320.zip for Broadcom,05/26/2005, 3.120.27.0 
 Other: Debian, custom kernel 2.6.14-rc3 Preemptive. ndiswrapper-1.4. TrendNet drivers make kernel panic.

 Card: Trendnet TEW-403PIplus
 Chipset: BCM4306
 pciid:
 Driver: ftp://217.160.249.143/TEW-403PIplus%5CUtility%5CDriver_Utility_TEW401PCplus_403PIplus_v3.50.21.zip or from your CD (extract the  cabs with UNSHIELD - http://synce.sf.net) - name of the driver is netgtks.
 Other: Tested on Fedora Core 3 with 16K stack kernel fix, works like a charm.

 Card: Trendnet TEW-421PC Wireless CardBus Card
 Chipset: Texas Instruments ACX 111 54Mbps
 pciid: 104c:9066
 Driver: Driver for the Airlink+ 802.11g Model AWLH3025 (http://www.airlinkplus.com/driver/11g/awlh3025_v6_0_5_30_xp.zip) works very well including WEP.
 Other: Tested on a Dell Latitude 400CS running Debian Linux/testing with kernel 2.6.10 with ndiswrapper-1.2rc1.

 Card: Trendware TEW-421PC
 Chipset: Texas Instruments ACX111 chipset
 Other: Works great, tested on Gentoo with 0.10 and latest WinXP driver from www.trendware.com

 Card: Trendnet TEW-421PC Wireless CardBus Crd H/W: B1  fcc id nhpwlg1101
 Chipset: Marvell Technilogy GroupLtd.
 pciid: 11ab:1faa (rev 03)
 Driver: The WinXP driver coming with the card worked great. The windows XP drivers that came with the card installed really well. (mrv8000c.*).
 Other: Tested on a Dell Inspiron 8100 running Debian Linux/testing with kernel 2.6.11.8  with ndiswrapper-1.2rc1.

 Card: Trendnet TEW-421PC Wireless CardBus Crd H/W:C1.0R
 Chipset: Realtek 8185
 pciid: 10ec:8185 (rev 20)
 Driver: The WinXP driver coming with the card worked great. The included XP drivers that came with the card installed perfectly.
 Other: Tested on a Toshiba Tecra 8200 running Slackware 12.0 with kernel 2.6.21.5 with ndiswrapper-1.47

 Card: Trendnet TEW-423PI (version A)
 Chipset: Texas Instrument ACX 111
 pciid: 104c:9066 Windows
 Driver: The latest windows XP driver works fine with ndiswrapper in Ubuntu 6.06.  Also supports WPA.  The native Linux acx driver in Ubuntu doesn''t work with this card, and you should remove the acx driver. (Today''s date: 2006-Aug-14)

 Card: Trendnet TEW-423PI (Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless (rev 03))
 used drivers from windows cd. WPA works 
 for H/W revision B1 (see box), used B1 drivers from website with ndiswrapper 1.28 on kubuntu edgy- only combination (driver/ndiswrapper) that worked for me.
 Tested with Debian linux Kernel 2.6.18 with ndiswraper 1.28-1 (debian source Package)

 Card: Trendnet TEW-424UB 802.11g Wireless USB Adapter
 Chipset: sis163u (Silicon Integrated Systems Corp)
 pciid: 0457:0163
 Driver: Latest driver for sis163 from http://www.sis.com
 Other: Works with WEP, WPA+TKIP and WPA+AES; tested with ndiswrapper version 1.13, 1.4 and 1.23, it seems it doesn''t work with 1.24 and higher.
 Other: As of 21 Feb 2007, works correctly using drivers from the CD with ndiswrapper version 1.37.

 Card: Trendnet TEW-441PC
 Chipset: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
 pciid: 104c:ac56
 Driver: Obtained from Trendnet''s web page.  The zip file contains drivers for various versions of Windows; I used the driver for Windows XP.  WEP works fine (at least 64 bit encryption).

 Card: Trendnet TEW-444UB
 Chipset: AR5523 Atheros Communications, Inc.
 usbid: 157e:3006
 Driver: downloaded from trendnet''s webpage: http://trendnet.com/en/asp/download_manager/list_subcategory.asp?SUBTYPE_ID=714, used with Win2k driver. The identical drivers are available on the product CD. Encryption: WEP/WPA both work fine. Tested with ndiswrapper 1.08 & 1.11.

 Card: T-Sinus 154data
 Chipset: Accton Technology Corp.
 pciid: 083a:4501
 Driver: named ts154usb, from supplied cd (xp installation), manufacturer Deutsche Telekom AG
 Other: SuSE 9.1 (kernel 2.6.5-7.108) - use ndiswrapper 0.10, no earlier version, be sure to remove old kernel module, 64bit WEP managed

 Card: Trust SpeedShare Turbo Pro Wireless PC-Card
 Chipset: Atheros AR5213 (802.11a/b/g)
 pciid: 168c:0013
 Driver: named net5211.inf, from manufacturer site (www.trust.com) (xp or w2k drivers),
 Other: just tested  (after some troubles) as Infrastructure (802.11g) on Mandrake 10.1 (kernel 2.6.8-1.12mdk) - use ndiswrapper 1.0rc1, be sure to remove old kernel module, testing ongoing, contact vnirnn66@yahoo.it (rosanna) I would be very happy to help

 Card: TRUST speedshare home wireless pci adapter
 Network controller: Texas Instruments ACX 100 22Mbps Wireless Interface
 pciid: 02:0d.0 0280: 104c:8400
 Driver: WinXP driver shipped with the products or from manufacturer site(http://www.trust.com/)
 Other: Works great on Fedora Core 5 with kernel 2.6.16.5(not rpm, vanilla from www.kernel.org)
 Product page: http://www.trust.com/products/product.aspx?artnr=13650

 Card:Wireless LAN PC Card 54 Mbps PCMCIA
 Chipset: Ralink chipset
 pciid: 1814:0201
 Driver: http://www.sweexeurope.com/media/drivers/LC500070_driv_all.zip (W2k version)
 Other: Debian stable 2.6.8-3-686, ndiswrapper-modules-2.6.8-3-686 and wireless tools.

 Laptop: Toshiba L10-154 
 Chipset: Linksys, A Division of Cisco Systems AirConn INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
 pciid: 17FE:2220
 Driver: On Toshiba Driver&Utilities CD (AMBIT/Winxp/neti2220.inf)
 Other: Using stable ndiswrapper-1.15, WEP is working, have to test WPA, until now no noticeable problems. Ndiswrapper Configuration File created by ndiswrapper-1.15: 17FE:2220:1468:0310.5.conf.

 Laptop: Toshiba M55-S1001 (rtl8139c wired ethernet)
 Chipset: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
 pccid: 0000:04:06.0 0200: 10ec:8139 (rev 10)
 Driver: Originally from http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1044678&moid=1311519 Toshiba driver does not work by default! Use this http://www.voxpopulimedia.com/pub/ToshibaM55-rtl8139-WinXP-ndis.tar.gz modified file instead!
 Other: Switched to ndis driver because standard driver (8139too) has problem with timing out on large files. Tested working on Ubuntu Dapper Drake. Before installing, unload existing 8139too and other drivers with "sudo rmmod 8139cp 8139too mii"

 Card: Wireless Lan PCI Card
 Chip:Realtek RTL8180
 pci device 10EC:8180
 Win98se driver from cd:NET8180.inf,rtl8180.sys
 compiled on Debian 4.0=    gcc3.4,linux-kernel-headers2.6.18,kernel2.6.18(source from Kernel.org),ndiswrapper1.47(from this place),binutil2.15
 Debian4.0 original-supplied binutils2.17 couldn''t compile kernel source. dpkg -i &ndash;force-downgrade to binutils2.15 worked
 card works well even with link quality of 20%
 couldn''t get the cd supplied linux driver to be compiled/installed

 Card: TP-Link TL-WN321G 802.11b/g, USB
 Chipset: Ralink
 usbid: 148f:2573
 Driver: Standard WinXP driver in the CDROM: rt73.inf and rt73.sys
 Other: ndiswrapper 1.23, Ubuntu (kernel 2.6.12-9.386), work well after test.

 Card: TP-Link TL-WN320G 802.11b/g, USB
 Chipset: ?
 usbid: 0b3b:0163 
 Driver: WinXP driver downloaded from manufacturer website: sis163u.inf
 Other: ndiswrapper 1.8, Ubuntu 6.06 (kernel 2.6.15-27-686)

 Card: Unex UR012i USB Adapter
 Chipset: Prism2
 usbid: 0967:0204 Rev 1.32
 Driver: Works with the WinXP driver in the shipped cd.
 Other: Debian sarge, 2.6.10 http://www.unex.com.tw/web1/english/product/prdct_detail.asp?c3name=802.11b%20Wireless%20LAN&c4name=UR012i

 Card: US ROBOTICS USR805410 802.11g Wireless Turbo PC Card
 Chipset: TI Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: US Robotics http://www.usr.com/support/5410/5410-files/USR11g_v6.0b15.exe Also available: zip file from Linuxant
 Driver for Netgear WG311V2 w 168c:0013 (rev 01)orks with WPA-PSK+TKIP: http://kbserver.netgear.com/support_details.asp?dnldID=770. The driver from US Robotics version 6.0 also works with WPA-PSK+TKIP.
 Other: Works. Thanks Ndiswrapper 0.9.  Kernel 2.6.7 Gentoo.  US Robotics donated this card to one of the developers, so this card will be fully supported. Thanks to US Robotics for their support. This driver doesn''t support power management, so the device will be halted/initialized during suspend/resume, so the interface needs to be reconfigured after resume.

 Card: US ROBOTICS USR805411 802.11g MaxG PC Card
 Chipset: Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller (rev 02)
 pciid: 14e4:4318
 Driver: I could not extract the USR driver so I used BCMWL5a.inf driver from Acer Aspire 5002. Currently tested successfully without encryption on Suse 10 using Suse provided ndiswrapper package
 Driver: I, on the other hand, was able to extract the USR driver from the CD. Run usrsetup.exe through Wine and it''ll give you a couple of .cab files you can use (the installer itself will fail). I chose to install USRMAXG.inf, but I think USRMAXGa.inf would work just as well. Works just fine. Gentoo Linux, 2.6.14 kernel, ndiswrapper 1.5 from Portage.
 WPA(2)-PSK works with both USRMAXGa.inf and BCMWL5a.inf using wpa_supplicant-0.4.8 (ndiswrapper-1.2,vanilla-2.6.13 Slackware 10.2/Suse 9.3)
 Driver: I was able to extract ALL of the above listed drivers by going to: http://www.usr.com/support/product-template.asp?prod=5411 - and extracting the "5411-na-1.00.022.exe" file using WinXP. A "US Robotics" directory is created under C:\Program Files. All of the Drivers and INF files are in the "MAXg Sure Start Installer" directory. USRMAXGa.inf works on 2.4.22 Slackware 10.1 (But "times out" when not in use for several minutes).

 Card: US ROBOTICS USR805416 802.11g Wireless Turbo PCI Card
 Chipset: TI Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: Driver for Netgear WG311V2 works with WPA-PSK+TKIP: http://kbserver.netgear.com/support_details.asp?dnldID=770. The driver from US Robotics version 6.0 also works with WPA-PSK+TKIP.
 Other: US Robotics donated this card to one of the developers, so this card will be fully supported. Thanks to US Robotics for their support.This driver doesn''t support power management, so the device will be halted/initialized during suspend/resume, so the interface needs to be reconfigured after resume.

 Card: US ROBOTICS USR805417 802.11g MaxG PC Card
 Chipset: Broadcom Corporation BCM4318 (rev 02)
 pciid: 14e4:4318
 Driver: You have unzip the file downloaded from USR then use cabextract on the file Data.exe and then unshield on the file data2.cab. These files are on the install CD, or can be downloadedhttp://www.usr.com/support/product-template.asp?prod=5417.  Tested with the driver USRMAXGa.inf on Slackware 10.1, kernel 2.4.29, ndiswrapper 1.5

 USB: US ROBOTICS USR805422 802.11g Wireless USB Adapter
 Chipset:Unknown
 usbid: 0baf:0118
 Driver: Official U.S. Robotics http://www.usr.com/support/5422/5422-files/USR5422-v3.3.36.0.exe rename the archive with a .zip extension, extract the files, then rename all of them to lower-case.
 Other: Works perfect, also the radio, tested on Ubuntu 5.10 kernel 2.6.12, ndiswrapper 1.1-4ubuntu. Tested on openSuSE 10.0 & 10.1 ndiswrapper 1.23 (default ndiswrapper woks also in 10.1). if uper kernel than 2.6.13-15 it should works. It works with kernel >= 2.6.19 vanilla and ndiswrapper 1.30.
 Bug: If the usb adapter is disconnected before the system shutdown the computer freeze, probably kernel panic. no problem under openSuSE 10.1, under openSuSE 10.0 the card have to be configured under Yast. it could be remove at any time. If ndiswrapper eat all cpu and you are unabled to remove the module, please install the lastest windows driver.
 OpenSuse 10.2 x86_64: Download 64bit Driver from: ftp://ftp.support.acer-euro.com/notebook/aspire_3020_5020/driver/winxp64bit/80211g.zip Unzip it. Use bcm43xx-fwcutter on bcmwl564.sys. Then ndiswrapper -i bcmwl5.inf. check: ndiswrapper -l. Then: modprobe ndiswrapper. Check: dmesg. If there''s no error: change modul name in yast network setup from bcm43xx to ndiswrapper.

 USB: US ROBOTICS USR805421 802.11g Wireless USB Adapter
 Chipset:Unknown
 usbid: 0baf:011B
 Driver: Official U.S. Robotics http://www.usr.com/support/5421/5421-files/5421-na.exe. Unpack it and install driver with USR5421X.inf. This doesn''t copy the .sys files (.sys files for RNDIS driver are part of Windows, so they are not needed in Windows; however, driver for USR5421 distributes .sys files but they are not installed by .inf file); so copy RNDISMPK.sys and usb8023k.sys files into /etc/ndiswrapper/usr5421x directory as rndismpk.sys and usb8023k.sys respectively).
 Other: Works with snapshot of 2006-02-13.
 Other: With 2.6.16 and later kernels, RNDIS devices are not initialized (when device is plugged in, nothing happens). To get it going, you need to set the variable bConfigurationValue in sysfs. An easy way to do this is to add 
  BUS=="usb", SYSFS{idProduct}=="001b", SYSFS{idVendor}=="0baf", \
  PROGRAM="/bin/sh -c "echo 1 > /sys/%p/device/bConfigurationValue''" 
  to /etc/udev/rules.d/z25_local_rules file and restart udev. Replace idProduct and idVendor as appropriate; for USR5421, "lsusb'' shows 001b (idProduct) and 0baf (idVendor).

 Card: VIVANCO WLAN PCC 54
 Chipset: TI Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: The driver for Windows XP included on the CD seems to work. The others either don''t succeed to load or even cause an OOPS!
 Other:  There is a native driver which at the time of writing (2004-12-26) is quite nice but doesn''t support WEP: http://acx100.sourceforge.net/

 Card: ViewSonic WPCI-100 PCI Adapter
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 14e4:4320
 Driver: Used the driver from the CD by extracting the data1.cab file with unshield.  Use the driver in this subdir, 2k_PCIdriver after the cab extraction.

 Card: ViewSonic WPCC-100 PCMCIA Adapter
 Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
 pciid: 14e4:4320
 Driver: Used the driver from the CD by extracting the data1.cab file with unshield.  Use the driver in this subdir, 2kfolder after the cab extraction.
 Other: Works with unprotected network at work; I''ll try WEP and WPA at home tonight.

 Card: ViewTech USB Adapter
 Chipset: Silicon Integrated Systems 163
 usbid: 0457:0163
 Driver: http://www.atlantis-land.com/firmware/3463_A02-UP-W54%5BV10-20%5D.ZIP - sis163.inf

 Card: Laptop Vega+ NS251S8
 Chipset : Broadcom Corporation BCM4301 802.11b (rev 01)
 pciid: 14e4:4301 (rev 01)
 Driver: Used driver at www.notebookservice.dk (download and install .exe file on a windows machine&rarr; gives you &rarr; bcmwl5.inf)

 Card: WESTELL A90-200WG-01
 Chipset: Texas Instruments ACX 111 54Mbps
 BUSID: PCI Interrupt 0000:02:00.0 
 Vendor: "TNET1130''
 Driver: Airlink driver (Card: Airlink+ 802.11g Model AWLH3025) from above works well ;) Better than driver that came with the card http://www.airlinkplus.com/driver/11g/awlh3025_v6_0_5_30_xp.zip
 Tested: Mandriva 2007.0 / Stock kernel w/ averatec 3150H

 Card: WLG-1500 802.11g 
 Chipset: Sis163
 usbid: ID 0457:0163 Silicon Integrated Systems Corp. 
 Driver: Standard WinXP driver supplied on CD: SiS163u.inf Can be downloaded from http://www.cameo.com.tw/download/driver/wireless/wlg-1500-1.1.zip
 Other: ndiswrapper 1.7 (CVS) / Gentoo Linux / Epia SP8000E
 Works ok, but causes Kernel panic on reboot unless USB-Stick is inserted only after booting.

 Card: XMedia IT-WL541 PC Card 802.11g Wireless LAN - PCMCIA
 Chipset: Texas Instruments tnet1130
 Driver: Not the driver on the CD. Rather driver is tnet1130.sys from download for Linksys.  Driver from WPC54Gv5.zip driver release version 1.0.0.8. Driver for Linksys WPC54G v5. Not XMedia. But same chip. I assume.
 Link: http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&amp;packedargs=c%3DL_Download_C2%26cid%3D1115417109934%26sku%3D1130276681921&pagename=Linksys%2FCommon%2FVisitorWrapper
 Works only one way.
 a. With no driver installed: Power off. Card out.
 b. Power Up. Add driver, LSTINDS.INF (card not in). Close Control Panel.
 c. Plug in card. Power LED on card should light. Configure wireless link info. Mode: Infrastructure Channel: 6 Transfer rate: Auto  Encryption: 40/64 Bit - WEP  Key Format: Hex
 All above using Xandros 3.0 Std with updates through 1/23/2006.
 Drivers on CD from XMedia do not work. 
 Updated: With Xandros add ndiswrapper to /etc/modules to enable it to work on reboot

 Card: http://www.xterasys.com/wpg2600.htm Xterasys WPG2600 802.11g Wireless LAN PCI Card (This is a PCI card)
 Chipset: INPROCOMM IPN2220
 pciid: 17fe:2220
 Driver: http://www.laptopvideo2go.com/forum/index.php?showtopic=7172 This one seems to be the newest (amd64 and x86) (edited INF file to support other devices)
 Confirmed to work with the driver above under Ubuntu Edgy x86 and ndiswrapper 1.37 with 64 bit WEP encryption (WPA not tested)

 Card: X-Micro 802.11b (XWL-11BPRG)
 Chipset: Realtek RTL8180L
 pciid: 10ec:8180
 Driver: Driver on the CD (WinXP)
 Other: Looks like driver from realtek website, but version is 1.54. With 1.70 card is detected but the leds remain blank, 1.54 works fine (Debian Sarge, 2.6.8 kernel, ndiswrapper 0.11)

 Card: X-Micro 802.11g (XWL-11GCAG)
 Chipset:  Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) 
 pciid: 168c:0013 (rev 01)
 Driver: Driver on the CD (WinXP)

 Card: Xpeed X400 PCI Adsl Adapter (not wireless card)
 Chipset: Integrated Telecom Express Inc. (ITEX)
 pciid: 1471:0188
 Driver: Driver on the CD (Windows 2000 or XP), 9x/ME DON''T WORK
 Warning: X400 only works with ndiswrapper 1.14 or (probably) above. The best way to get it working is remove the ndiswrapper.ko that comes with your system (if it isn''t version 1.14) and then compile ndiswrapper from sources.
 System: Sucessfull tested on Ubuntu 5.10 with kernel 2.6.12-9.
 Other: You can safety remove any files other than *.inf and *.sys from /etc/ndiswrapper/(driver_folder)/ after ndiswrapper -i (driver).inf

 Card: ZCom XG-60x 802.11g 
 Chipset: Conexant Prism Javelin 
 pciid: 1260:3886 
 Driver: Standard WinXP driver supplied on CD: ZCom_XG60x/XP_ver.2.1.14.2/Driver/PRISMA00.inf Can be downloaded from http://www1.medion.de/downloads/download.pl?id=2271&type=treiber&filename=wlansim2000g60xwinxp.exe&lang=de
 Other: ndiswrapper 0.6 / Suse 9.1 / Medion MD-42489 
 Other: ndiswrapper 0.12 / Debian Sarge / Linux 2.6.11-rc1 Works fine with WPA-PSK and AES/CCMP (using wpa_supplicant) in managed mode. Not tried AdHoc yet.

 Card: Zonet ZEW2501 802.11g USB Adapter
 Chipset: zd1211b
 pciid: 0ace:1215
 Driver: Windows XP driver 6.17 from http://www.atheros.com/RD/ZyDAS/web_driver/ZD1211B/Windows/ZD1211BWinPkgS_6_17_0_0_ALL.zip
 Other: ndiswrapper 1.28 / wpa_supplicant 0.4.9 / kernel 2.6.18.1 / using WPA-PSK / had to broadcast SSID
 Other: Zip file only provides an EXE, installed on Windows first to get the SYS and INF files

 Card: Zonet ZEW2502 802.11b/g USB Adapter
 Chipset: Marvell Semiconductor, Inc., Libertas 802.11 g/b Wireless
 pciid: 1286:1fab
 Driver: Windows XP/2K version 2.1.0.18 (inf)/1.02 (directory name) from the CD included with the device (not available for download at this time from Zonet''s support site), /mnt/cdrom/V1.02 driver and utility install(USB)/Inf/WinXP_2K/netMw225.inf
 Other: ndiswrapper 1.9 / kernel 2.6.17-1.2174

 Card: Zyxel M-102 Wireless Laptop Adapter
 Chipset: Atheros Communications, Inc. AR5005VL 802.11bg Wireless NIC (rev 01)
 pciid: 168c:0020 (rev01)
 Driver: Downloaded driver from http://us.zyxel.com/web/support_download_detail.php?sqno=141656
 Other: ndiswrapper 1.37, Fedora 6 with www.linuxant.com 16k stack kernel

 Card: Zyxel G-162 802.11g Wireless CardBus Card
 Chipset: Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: Driver for Windows XP included on CD
 Other:  ndiswrapper 0.12.0, kernel 2.6.10, gentoo.  (suspend/resume not tested yet)
 Driver: Driver for Windows XP downloaded from http://www.zyxel.ch/files.cfm?area=3&gr=03&art=2446&filetype=&os=&keyword=&lang=d&showfiles=1&showOS=5 (G162_3_0_2_1.zip, FwRad16.bin, FwRad17.bin)
 Other:  kernel 2.6.13-15-default SUSE ndiswrapper 1.2 WPA2

 Card: (lpsci -n): 01:07.0 Class 0200: 10ec:8180 (rev 20)
 Driver: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 (click on) ndis5x-8180(170).zip
 Other: Mandrake 10.1
 pciid: 0000:06:00.0
 Driver: Driver for Windows XP included on CD
 Other:  ndiswrapper 0.11.0, kernel 2.6.12-9-386, Ubuntu breezy-badger.  (suspend/resume not tested yet)

 Card: Zyxel ZyAir B-300 802.11b
 Chipset: Broadcom Corporation BCM4301 802.11b (rev 02)
 pciid: 14e4:4301
 Driver: Downloaded from Zyxel ftp://ftp.zyxel.com/ZyAIR_B-300/driver/ZyAIR_B-300_3.8.28.0(USA)_Windows98_Windows98SE_WindowsME_Windows2000_WindowsXP__US.zip
 Other: ndiswrapper 1.1 / kernel 2.6.12-10-386 / Ubuntu 5.10

 Card: Zyxel ZyAir G-302v2 802.11b+g
 Chipset: Texas Instruments ACX 111 54Mbps Wireless Interface
 pciid: 104c:9066
 Driver: Downloaded from Zyxel ftp://ftp.us.zyxel.com/ZyAIR_G-302_v2/driver/G-302v2_v1.0.0_driver_utility.zip
 Other: ndiswrapper 1.8-1 / kernel 2.6.14-2-k7 / Debian Testing &ndash; I haven''t tried with WEP yet. Card works but seems to drop incoming connections every once in a while. Could be a config issue on my part though.
 Other: Ubuntu 6.06, kernel 2.6.15-23-386, ndiswrapper 1.8.  Make sure you remove acx Kernel module as this conflicts and does not work.  Next Ubuntu release with latest acx Kernel module will probably work.  &ndash; http://www.julianyap.com/wiki/Getting_the_Zyxel_ZyAir_G-302v2_802.11bg_wireless_card_to_work_on_Ubuntu_6.06 Julian Yap @ 20060529

 Card: Zyxel G-302 v3 802.11b+g
 Chipset: ? 8185 ?
 pciid: ?
 Driver: WinXP Driver on drivers CD
 Other: ndiswrapper 1.8-1 / Kernel: 2.6.17-11-generic #2 SMP - Ununtu 6.10 &ndash; WEP works. Card works but seems to drop incoming connections every once in a while. Could be a config issue on my part though.

 Card: Zaapa ZW-P854-G
 Chipset: RaLink ralink RT2500 802.11 Cardbus Reference Card (rev 01).
 pciid: 1814:0201.
 Driver: Obtained from the CD included with the card. It seems to be the one that ralink distributes for rt2500 (ver. 2.2.8 - 9/9/2004).
 ndiswrapper ver: 1.1rc3 (obtained with dmesg).
 Other: Knoppix 3.9 (kernel 2.6.11) live-CD. Knoppix autodetects the card and assigns the module rt2500 to it, but the system crashes some times when trying to use the wireless card. I have removed the rt2500 module and configured the card with ndiswrapper and it works.

 Card: Zoom Wireless-G 4410
 Chipset: Accton Technology Corp.
 usbid: 083a:c501
 Driver: wlanuig.inf driver available on CD or from http://www.zoom.com the website
 Other: Confirmed working on Mandriva and PCLinuxOS

 Card: Zyxel ZyAir G-202 802.11b+g USB2.0
 Chipset: ZyDAS ZD1211 802.11b+g Wireless LAN (?)
 pciid: 0586:3410
 Driver: Downloaded Windows drivers from http://www.zyxel.com/DownloadLibary_ShortName/G-202/driver/G-202_6.6.0.0.zip
 Other: Kernel 2.6.19-1.2911.fc6, ndiswrapper 1.25, tried only in open mode.

 Card: Zyxel ZyAir G-220 802.11b+g USB
 Chipset: ZyDAS ZD1211 802.11b+g Wireless LAN
 pciid: 0586:3401
 Driver: Downloaded ZD1211 driver from http://www.zydas.com.tw/web_driver/ZD1211_USB/Windows/ZD1211USB_Install_4_13_0_0_ALL.zip
 Other: Kernel 2.6.15-1.2054_FC5, ndiswrapper 1.14, works with WPA-PSK, wpa_supplicant 0.4.8.

 Card: Zyxel ZyAir G-260 802.11b+g USB
 Chipset: ZyDAS ZD1211(?)
 pciid: 0586:3408
 Driver: Downloaded driver from http://www.zyxel.com/web/download.php?FileName=200506271610072005062716071520041105154230_20060705_7.2.2.42-G-260driver7.2.2.42.zip
 Other: SUSE 10.1, kernel 2.6.16.21-0.25-smp, ndiswrapper 1.10, works with WPA-PSK

 Card: Zyxel G-270 802.11g Wireless USB Adapter
 Chipset: ???
 USBid: 0586:340c
 Driver: Downloaded driver from http://www.zyxel.it/web/support_download_list.php?indexflag=20040906164721&ModelIndexflags=0,420051121093542

 Card AirLink101 AWLL3055 802.11g USB Adapter
 Chipset: ZyDAS 1215(?)
 pciid: 0ace:1215 ZyDAS

